Effects of upholstery materials on the burning behavior of real‐scale residential upholstered furniture mock‐ups

Fire spread and growth on real‐scale four cushion mock‐ups of residential upholstered furniture (RUF) were investigated with the goal of identifying whether changes in five classes of materials (barrier, flexible polyurethane foam, polyester fiber wrap, upholstery fabric, and sewing thread), referred to as factors, resulted in statistically significant changes in burning behavior. A fractional factorial experimental design plus practical considerations yielded a test matrix with 20 material combinations. Experiments were repeated a minimum of two times. Measurements included fire spread rates derived from video recordings and heat release rates (HRRs). A total of 13 experimental parameters (3 based on the videos and 10 on the HRR results), referred to as responses, characterized the measurements. Statistical analyses based on Main Effects Plots (main effects) and Block Plots (main effects and factor interactions) were used. The results showed that three of the factors resulted in statistically significant effects on varying numbers of the 13 responses. The Barrier and Fabric factors had the strongest main effects with roughly comparable magnitudes. Foam was statistically significant for fewer of the responses and its overall strength was weaker than for Barrier and Fabric. No statistically significant main effects were identified for Wrap or Thread. Multiple two‐term interactions between factors were identified as being statistically significant. The Barrier*Fabric interaction resulted in the highest number of and strongest statistically significant effects. The existence of two‐term interactions means that it will be necessary to consider their effects in approaches designed to predict the burning behavior of RUF.     

Effect of Fe2+ and Fe0 Applied Photo‐Fenton Processes on Sludge Disintegration

The disintegration of waste active sludge was investigated by photo‐Fenton processes. A batch study was conducted to evaluate parameters, such as Fe²⁺ and Fe⁰ ions and H₂O₂, governing the activated sludge integration by the photo‐Fenton process. Under optimum conditions, the concentration of soluble chemical oxygen demand (SCOD) with the classical Fenton process (CFP) increased very rapidly in the first five minutes due to the sufficient presence of reaction components in the medium, and then the rate of increase declined. In the modified Fenton process (FTP), the SCOD concentration increased more slowly as metallic iron powder must first be dissolved. The photo‐Fenton process proved to be a feasible and efficient process for the disintegration of waste sludge.     

基于改进残差特征蒸馏的轻量级超分辨率网络

基于深度学习的图像超分辨率算法通常采用递归的方式或参数共享的策略来减少网络参数，这将增加网络的深度，使得运行网络花费大量的时间，从而很难将模型部署到现实生活中。为了解决上述问题，本文设计一种轻量级超分辨率网络，对中间特征的关联性及重要性进行学习，且在重建部分结合高分辨率图像的特征信息。首先，引入层间注意力模块，通过考虑层与层之间的相关性，自适应地分配重要层次特征的权重。其次，使用增强重建模块提取高分辨率图像中更精细的特征信息，以此得到更加清晰的重建图片。通过大量的对比实验表明，本文设计的网络与其他轻量级模型相比，有更小的网络参数量，并且在重建精度和视觉效果上都有一定的提升。     

Application of artificial neural network method to predict the breakage properties of PGE bearing chromite ore

In the present investigation, systematic grinding experiments were conducted in a laboratory ball mill to determine the breakage properties of low-grade PGE bearing chromite ore. The population balance modeling technique was used to study the breakage parameters such as primary breakage distribution (B_{i, j}) and the specific rates of breakage (S_i). The breakage and selection function values were determined for six feed sizes. The results stated that the breakage follows the first-order grinding kinetics for all the feed sizes. It was observed that the coarser feed sizes exhibit higher selection function values than the finer feed size. Further, an artificial neural network was used to predict breakage characteristics of low-grade PGE bearing chromite ore. The predicted results obtained from the neural network modeling were close to the experimental results with a correlation of determination R² = 0.99 for both product size and selection function.     

Using deep learning to combine static and dynamic power analyses of cryptographic circuits

Side-channel attacks have shown to be efficient tools in breaking cryptographic hardware. Many conventional algorithms have been proposed to perform side-channel attacks exploiting the dynamic power leakage. In recent years, with the development of processing technology, static power has emerged as a new potential source for side-channel leakage. Both types of power leakage have their advantages and disadvantages. In this work, we propose to use the deep neural network technique to combine the benefits of both static and dynamic power. This approach replaces the classifier in template attacks with our proposed long short-term memory network schemes. Hence, instead of deriving a specific probability density model for one particular type of power leakage, we gain the ability of combining different leakage sources using a structural algorithm. In this paper, we propose three schemes to combine the static and dynamic power leakage. The performance of these schemes is compared using simulated test circuits designed with a 45-nm library.     

0Cr17Ni4Cu4Nb传感器断裂原因分析

某力学传感器在出厂检验流程中发生断裂失效,为了确定失效原因,防止此类失效事件再次发生,实验对该传感器的力学性能、金相组织和断口形貌进行了分析,确定了断裂原因。结果表明,传感器的失效模式为氢致延迟开裂,材料中氢含量偏高和开裂位置机加工质量较差是导致传感器发生氢致开裂的主要原因。结合失效原因,提出了改进措施。     

A novel differential evolution mapping technique for generic combinatorial optimization problems

Differential evolution is primarily designed and used to solve continuous optimization problems. Therefore, it has not been widely considered as applicable for real-world problems that are characterized by permutation-based combinatorial domains. Many algorithms for solving discrete problems using differential evolution have been proposed, some of which have achieved promising results. However, to enhance their performance, they require improvements in many aspects, such as their convergence speeds, computational times and capabilities to solve large discrete problems. In this paper, we present a new mapping method that may be used with differential evolution to solve combinatorial optimization problems. This paper focuses specifically on the mapping component and its effect on the performance of differential evolution. Our method maps continuous variables to discrete ones, while at the same time, it directs the discrete solutions produced towards optimality, by using the best solution in each generation as a guide. To judge its performance, its solutions for instances of well-known discrete problems, namely: 0/1 knapsack, traveling salesman and traveling thief problems, are compared with those obtained by 8 other state-of-the-art mapping techniques. To do this, all mapping techniques are used with the same differential evolution settings. The results demonstrated that our technique significantly outperforms the other mapping methods in terms of the average error from the best-known solution for the traveling salesman problems, and achieves promising results for both the 0/1 knapsack and the traveling thief problems.     

Facial expression recognition of intercepted video sequences based on feature point movement trend and feature block texture variation

Facial Expression Recognition (FER) is an important subject of human–computer interaction and has long been a research area of great interest. Accurate Facial Expression Sequence Interception (FESI) and discriminative expression feature extraction are two enormous challenges for the video-based FER. This paper proposes a framework of FER for the intercepted video sequences by using feature point movement trend and feature block texture variation. Firstly, the feature points are marked by Active Appearance Model (AAM) and the most representative 24 of them are selected. Secondly, facial expression sequence is intercepted from the face video by determining two key frames whose emotional intensities are minimum and maximum, respectively. Thirdly, the trend curve which represents the Euclidean distance variations between any two selected feature points is fitted, and the slopes of specific points on the trend curve are calculated. Finally, combining Slope Set which is composed by the calculated slopes with the proposed Feature Block Texture Difference (FBTD) which refers to the texture variation of facial patch, the final expressional feature are formed and inputted to One-dimensional Convolution Neural Network (1DCNN) for FER. Five experiments are conducted in this research, and three average FER rates 95.2%, 96.5%, and 97% for Beihang University (BHU) facial expression database, MMI facial expression database, and the combination of two databases, respectively, have shown the significant advantages of the proposed method over the existing ones.