Hydrophobizing polyether sulfone membrane by sol-gel for water desalination using air gap membrane distillation

ABSTRACT

The hydrophobic polyether sulfone membranes were prepared by the sol-gel method to be applied in an air gap membrane distillation setup for desalination. The surface modifications were carried out using Trimethylsilyl chloride (TMSCl) and Methyltrimethoxysilane (MTMS) solutions. The membranes were characterized using Attenuated Total Reflection Infrared (ATR-IR) spectroscopy, Scanning Electron Microscopy (SEM), and Optical Contact Angle (OCA) methods. The effects of membrane preparation as well as operating conditions such as temperature difference, salt concentration, feed rotation speed, and cold-side temperature on membrane performance were investigated using central composite design method. It was found that feed temperature has the largest effect among the parameters on the permeation flux. The flow rate and salt rejection of the membrane in the optimum conditions were 4.47 Kg m^?2 h^?1 and 99.37%, respectively.     

Enhanced photocatalytic and antifungal activity of ZnO–Cu2+and Ag@ZnO–Cu2+ materials

Zinc oxide is one of the most versatile nanostructured materials with a broad range of applications. Besides, its physicochemical properties can be tuned easily by synthesis conditions to be optimal for a specific application. In our group, we aim for the production of visible light-active materials with enhanced antimicrobial activity. Thus, we synthesize ZnO–Cu²⁺and Ag@ZnO–Cu²⁺ by using a fast and robust microwave solvothermal reaction. We investigate the limit of solubility of Cu²⁺into ZnO lattice producing Cu doped ZnO materials with different doping levels (1, 2, 3, 4, and 5 at. %, Cu/Zn). We also investigate the role of the copper precursor, using copper(II) acetate or copper(II) sulfate as model precursors. Copper acetate incorporates more efficiently into ZnO lattice by decreasing the Eg value of the doped materials at low doping levels. Furthermore, we study the composites Ag@ZnO–Cu²⁺ aiming to reduce doping levels and to improve antimicrobial activity. Characterization of the materials by different techniques demonstrates their uniform size, purity, crystallinity, and visible light activity. In this study, we evaluate airborne fungal contamination and demonstrate the capacity of ZnO–Cu²⁺ and Ag@ZnO–Cu²⁺ to inhibit fungal growth. We studied the microbiological quality of indoor air (vivarium) by sampling air under different conditions. By sampling air with a photocatalytic prototype, the amount of fungi in the air decreases considerably, particularly fungi that can enter the lung. In addition, ZnO–Cu²⁺ shows excellent antifungal activity against Candida sp at low doses. We use Atomic force microscopy (AFM) and holotomographic microscopy (HTM) to provide further evidence on the capacity of the prepared materials to achieve effective damage to fungal cells and to inhibit biofilm formation.     

某会议室夏季工况不同送风方式下的气流组织数值模拟研究

采用数值模拟软件对××大学科技馆某小型会议室进行数值模拟,以实际测量的数据为边界条件,建立合适的数学和物理模型,得到温度场、速度场以及空气品质场等模拟结果,通过对模拟结果的对比分析,得到了最佳的气流组织设计方案,相关结论可以为室内气流组织方案设计与优化提供参考依据。     

室内空气状况及污染防治措施

随着室内污染问题的日趋严重,我国室内空气污染状况、来源与危害及主要的防治措施也越来越受到关注。     

Wet-oxygen corrosion resistance and mechanism of bi-layer Mullite/SiC coating for Cf/SiC composites

A bi-layer oxidation-resistant coating consisting of a mullite outer coating, and a SiC inner coating on the surface of C_f/SiC composites was prepared by the chemical vapour deposition and an air spray sol-gel process, and its corrosion behavior was evaluated in a wet-oxygen coupling environment. Results show that the formation of SiO₂ glass layer and its reaction with mullite particles to form aluminosilicate glass layer, leading to an increase in the density of the mullite outer coating, so that the weight loss of bi-layer Mullite/SiC coating coated C/SiC sample was only 1.11 × 10^?3 g·cm^?2 in the first 100 h of oxidation. However, the weight loss of the coated sample reached 26.82 × 10^?3 g·cm^?2 after 200 h of oxidation due to a part of the mullite outer coating was detached. The SiO₂ glass phase reacted with water vapour to generate gaseous Si(OH)_x, which created distinct holes on the surface of the SiO₂ glass layer or inside the molten aluminosilicate glass layer. Eventually, the mullite outer coating was blistered and detached from the surface of the sample due to the combination and growth of holes.     

Nitrogen dry deposition to Lake Superior and Lake Michigan

Nitrate (NO₃^?) levels in Lake Superior have increased from historic levels of about 5?μM to its current concentration of about 25?μM. The atmosphere makes a substantial contribution to the nitrogen budgets for Lake Superior and Lake Michigan. This study provides a more well-defined estimate of nitrogen dry deposition rates derived from the measurement of over-water concentrations, and in situ meteorological measurements, which were input into the Resistance Model. We obtained a nitrogen dry deposition rate of [(3.41?±?2.26)?×?10⁷?kg?N/yr; (5.90?±?3.91)?kg?N/ha/yr] over Lake Michigan, and [(1.54?±?1.06)?×?10⁷?kg?N/yr; (1.87?±?1.27)?kg?N/ha/yr] over Lake Superior. Nitric acid (HNO₃), which originates from the combustion of fossil fuels, contributes 84% of the total nitrogen dry deposition to Lake Michigan; and 66% to Lake Superior. Ammonia (NH₃), which originates from agricultural activities and gasoline combustion, is the second highest contributor of nitrogen dry deposition to both lakes: contributing 13% to Lake Michigan and 32% to Lake Superior. The nitrogen dry deposition is approximately 68% of the nitrogen wet deposition over Lake Superior, and approximately 80% of wet deposition over Lake Michigan. The over-water dry deposition velocity of HNO₃ and NH₃ were also evaluated. We obtained morning deposition velocities of 0.099?cm/s for NH₃ and 0.095?cm/s for HNO₃; and afternoon values of 0.137?cm/s for NH₃ and 0.132?cm/s for HNO₃. Another key finding is that the atmospheric concentrations of nitrogen compounds near Lake Michigan and Lake Superior have decreased since 2003.     

Effect of paddy variety,milling status and aeration on the progeny emergence of Sitophilus oryzae L. (Coleoptera: Curculionidae)

In Sri Lanka, insects cause enormous losses in stored paddy; the rice weevil Sitophilus oryzae is a devastating insect. The magnitude of losses in stored paddy caused by insects varies with characteristics of paddy but has not yet been fully investigated. Due to the increased concerns on the use of synthetic chemicals, safer alternative pest management strategies for stored paddy are needed. Objectives of this study were to determine the effect of paddy variety, milling status and nature of aeration on the progeny emergence of S. oryzae. The experimental design was a three-factor factorial, completely randomized design (CRD).Freshly emerged S. oryzae adults were introduced to un-milled paddy or milled/polished rice belonging to traditional and improved varieties. The samples were maintained either open or airtight, and the progeny adults emerged was determined at monthly intervals. Progeny emergence was lower in the traditional varieties, un-milled paddy and under air-tight condition compared to improved varieties, milled/polished rice and aerated samples, respectively. Overall, the improved variety Bg 300 exhibited the maximum resistance to infestation by S. oryzae. Furthermore, white-colour and long-grain varieties produced lower progeny of S. oryzae than red-colour and short-grain varieties, respectively. It is concluded that the maximum protection in paddy/rice from insect infestation during storage can be achieved by using traditional varieties, stored as un-milled paddy (without dehusked) under airtight condition.     

基于化学监督的超(超)临界机组关键控制节能指标分析及建议

针对超(超)临界机组参数提高、材质升级,化学技术监督中的监督指标对机组经济性和可靠性影响较大的问题,本文通过机组典型案例分析、技术监督报告、现场实测等,对目前化学监督中影响较大的、关键的技术指标进行了系统性的分析研究。研究结果找出了6项化学监督中超(超)临界机组关键的、影响较大的控制监督指标,且提出了指标控制值和控制方法。这项系统性研究分析方法对指导超(超)临界机组化学监督具有重要的借鉴作用,以控制超(超)临界机组因参数提高和材质升级带来的新问题和新挑战。     

Effect of iron content on the wear behavior and adhesion strength of TiC–Fe nanocomposite coatings on low carbon steel produced by air plasma spray

In this study, the effect of Fe content on the abrasion behavior of TiC–Fe nanocomposite coatings applied on the CK45 steel substrate by air plasma spray method was investigated. For this purpose, milled TiC powder was prepared at 1, 2, 3 and 4 h milled TiC powder for 4 h was selected as the suitable sample. In the next step, a suitable sample mixture with different iron powder concentrations of 5, 10, 15, 20 and 25% was prepared by mechanical milling. The granulated mixture was applied to the substrate using air plasma spray technique. Microstructural and phase analyzes were performed using X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM). According to the results of Williamson-Hall calculations, the TiC crystallites' size decreased by 49 nm–29 nm, and network strain reached 0.16% by increasing milling time from 1 h to 4 h. Studies have shown that the coatings contain titanium carbide, iron oxide, and titanium oxide, with the number of phases formed depending on the amount of iron in the chemical composition. Investigation of the tribological properties of the coating layer showed that with increased iron content in the coating, the wear resistance of the samples is reduced. Hardness tests on coatings indicate that adding iron to nanocomposite from 5 to 25% reduces hardness from 1025 to 699 Hv. It can be argued that a slight increase in the adhesion strength of the coating to the substrate is due to increased wettability because of the formation of molten iron in the coating.     

Microstructural evaluation and thermal oxidation behaviors of YSZ/NiCoCrAlYTa coatings deposited by different thermal techniques

In this paper, two coating techniques, the high velocity oxy-fuel (HVOF) and air plasma spray (APS) techniques, were used to deposit a bond coat of NiCoCrAlYTa on the Inconel 625 substrate, followed by applying a topcoat of yttria-stabilized zirconia (YSZ). The samples were preoxidized in an argon-controlled furnace at a temperature of 1000 °C for 12 and 24 h to characterize the microstructure of a thermally grown oxide (TGO) using the two coating techniques. The most suitable preoxidized samples were further tested for isothermal oxidation at 1000 °C for up to 120 h, and a hot corrosion test was performed at 1000 °C for up to 52 h or until spalling occurred. As-sprayed and oxidized samples prepared with different coating techniques were evaluated in terms of their microstructure using different characterization methods, such as field emission scanning electron microscopy (FESEM), variable pressure scanning electron microscopy (VPSEM), energy dispersive X-ray spectroscopy (EDS) equipped with energy dispersive X-ray and X-ray diffraction (XRD) analyses. In addition, the mechanical properties of these samples were evaluated using adhesion tests. The results show that the YSZ/NiCoCrAlYTa coating applied with the HVOF technique forms a more thin and continuous layer of TGO than that obtained when applying a YSZ/NiCoCrAlYTa coating using the APS technique, indicating that a severe brittle oxidation interface exists between the two layers. The results also indicate that the mechanical strength obtained from the adhesion test of the coated samples is observably affected by the oxidation behaviors obtained with the different deposition techniques chosen.