基于蜻蜓翅脉结构的连续碳纤维增强树脂基复合材料仿生设计与增材制造

以具有轻质高强优异性能的蜻蜓翅脉结构为设计灵感，在分析翅脉网格结构抗冲击原理的基础上，设计了传统和仿生两类对比结构。采用熔融挤出3D打印机成功制备了具有不同结构的连续碳纤维增强聚乳酸复合材料试样，并对不同结构复合材料试样的拉伸性能和抗冲击性能进行了测试和对比分析。研究分析结果表明：由于拉伸力方向上的连续碳纤维含量相对较少，限制了仿生结构复合材料抗拉强度的提高，但仿生结构的平均抗拉强度为传统结构的1.18倍；当仿生结构复合材料试样受到冲击力时，其内部六边形结构的连接角度会发生变化，从而极大消耗冲击能量，同时具有六边形网格结构的连续碳纤维可以有效阻碍裂纹的扩展，因此仿生结构的平均冲击韧性可以达到传统结构的2.46倍；仿生蜻蜓翅脉结构可以显著提高增材制造复合材料的综合力学性能，且对于抗冲击性能的提高具体突出效果。连续碳纤维增强树脂基复合材料的有效可行的仿生蜻蜓翅脉结构设计和增材制造，可极大扩展其在高冲击载荷领域中的相应应用。     

Effects of particle fouling and magnetic field on porous fin for improved cooling of consumer electronics

The combined effect of particulate fouling and magnetic field on the efficiency of a convective–radiative porous fin heatsink with temperature‐dependent thermal conductivity is presented. The developed thermal models are solved using differential transformation method. The effects of thermal conductivity, porosity, convection, radiation parameter, and thermal fouling number on the fin thermal efficiency are investigated. The presence of thermal fouling on the surface of the fin is shown to increase the temperature distribution. The presence of particle deposition on the fin surface significantly decreases the rate of heat transfer as additional thermal resistance of the fouling layer decreases the thermal performance of porous fin heatsink. Moreover, the fin efficiency decreases as the value of fouled Biot, Darcy, radiation number, and thermogeometric parameter increases. It is established that M_f < M_c, which indicates that the efficiency of the fouled fin is greater than the efficiency of the clean fin. Furthermore, the result of the present study is validated with the established results of Chebyshev spectral collocation method and fourth‐order Runge–Kutta with shooting method and an error margin of 0.000000023 is established.     

Numerical modelling and optimisation of natural convection heat loss suppression in a solar cavity receiver with plate fins

This study details the numerical modelling and optimization of natural convection heat suppression in a solar cavity receiver with plate fins. The use of plate fins attached to the inner aperture surface is presented as a possible low cost means of suppressing natural convection heat loss in a cavity receiver. In the first part of the study a three-dimensional numerical model that captures the heat transfer and flow processes in the cavity receiver is analyzed, and the possibilities of optimization were then established. The model is laminar in the range of Rayleigh number, inclination angle, plate height and thickness considered. In the second part of the study, the geometric parameters considered were optimized using optimization programme with search algorithm. The results indicate that significant reduction on the natural convection heat loss can be achieved from cavity receivers by using plate fins, and an optimal plate fins configuration exit for minimal natural convection heat loss for a given range of Rayleigh number. Reduction of up to a maximum of 20% at 0° receiver inclination was observed. The results obtained provide a novel approach for improving design of cavity receiver for optimal performance.     

Interaction of graphene,MnOx, and Ca2+ for enhanced biomimetic, ‘bubble-free’ oxygen evolution reaction at mild pH

Water electrolysis powered by renewable electricity will likely be critical to a future hydrogen economy. However, the typical use of strongly acidic or alkaline electrolytes necessitates the use of expensive materials, while bubbles add to capital and operational costs, due to blocking of the electrode surface and the necessary use of pumps and gas-liquid separators. Here ‘bubble-free’ oxygen evolution at mild pH is carried out using an electrocatalyst that mimics photosystem II (PSII). The bubble-free electrode includes a gas-extracting Gore-Tex® membrane. Edge-functionalised graphene (EFG) is included to mimic the metal-binding local protein environment, and the tyrosine residue, in the oxygen evolving complex (OEC) of PSII, while MnO_x and Ca²⁺ are incorporated to mimic the Mn₄CaO₅ cluster. Interaction between EFG, MnO_x, and Ca²⁺ results in a significant, 130 mV fall in the overpotential required to drive electrocatalytic oxygen evolution at 10 mA cm⁻², compared to the electrode without these biomimetic components.     

Adhesion and interfacial characterization of biomimetically texturized lithium disilicate

Lithium disilicate glass-ceramic (LS2) can be biomimetically textured by crystal orientation, mimicking the microstructure of dental enamel and inducing anisotropic mechanical responses to crack growth. The deliberate texturization of LS2 plays to the clinical advantage of reinforcing weak sites of typical fracture initiation in dental prosthetic constructs. Similar to enamel, adhesion of biomimetically textured LS2 could also show anisotropic behavior. Therefore, tensile bond strength (TBS) before and after thermocycling (TC) and interfacial characterization of biomimetically textured LS2 (parallel (PAR) or perpendicular (PER) crystal orientation) after different pre-treatment modes (hydrofluoric acid etching (HFE), grit blasting (GBL) and self-etching glass-ceramic primer (SGP)) were investigated. TC reduced significantly TBS for all specimens except for GBL. Biomimetic textured LS2 after HFE showed anisotropic behavior regarding adhesion. Crystal orientation reduced TBS for the PER HFE specimens after TC significantly. In general, the TBS of HFE specimens was still higher or not significantly lower compared to other pre-treatment modes like GBL or SGP. For the GBL and SGP specimens, crystal orientation had no influence on TBS and interfacial characteristics. In contrast HFE specimens showed different interfacial characteristics depending if they were PAR or PER texturized. Based on these findings, HFE of biomimetic textured LS2 can be recommended. For bonding, the PAR orientation is recommended as its adhesion potential is less prone to degrade.     

后置翼墙加固框架柱抗震变形能力研究

为考察后置翼墙加固混凝土框架柱的抗震性能,结合已有研究中试验轴压比为0.31、0.36、0.40,原柱纵筋配筋率为0.82%~1.23%的18个后置翼墙加固试件的低周反复荷载试验,采用ABAQUS软件进行了675个后置翼墙加固试件在水平反复荷载下的有限元模拟。试验和有限元分析结果表明：由于后置翼墙作为原柱的耗能及加固部件有效保护了原柱,后置翼墙加固试件中原柱损伤相对较轻;后置翼墙一字形加固柱的损伤主要发生在两片后置翼墙端部区域,T形及L形加固柱原柱损伤主要发生在未后置翼墙一侧,且损伤区域较小;建立了翼墙加固柱极限层间位移角关于原柱轴压比、剪跨比、翼墙钢筋配筋率等关键参数的计算式。     

制冷剂流路对冷凝器换热特性的影响

对于复杂流路的肋片管换热器进行了换热性能实验，实验用冷凝器流路分别为1～4路，在实验条件下，2路的设计达到了最大的换热量。根据试验结果分析了产生换热性能差异的原因。     

新型排风能量回收装置的分析与研究

作者从全铝制板翅式换热器与凝结水间接蒸发冷却联合应用的试验获得的结果出发，对该换热器应用于集中空调系统的能量回收做出了计算，并且进行较为详尽的分析，计算结果表明全新风空调系统使用该能量回收装置后，可以节省机组装机容量50％，节省运行费用一半；这对需要大量新风的厂房，医院的特殊病区等有很好的节能效果；而普通的舒适性空调系统，应用该能量回收装置后也可以节省装机容量20％；这表明在集中空调系统中应用全铝制板翅式换热器既能改善室内空气品质又能回收排风能量，是集中空调系统节能和人性化行之有效的措施：     

使用R407C冷媒的翅片管冷凝器的计算机模拟

本文针对R22的替代工质R407C，采用稳态分布参数法，对翅片管冷凝器进行了计算机模拟：对制冷剂整个流动方向的温度、饱和温度、干度、换热量、压力、管内换热系数进行了模拟计算并加以分析，并以回路为基本单位，比较了回路之间换热情况的差别，为系统的仿真以及使用R407C的翅片管冷凝器的设计打下基础。     

高频焊翅片管散热器外罩传热性能的研究

通过对高频焊翅片管散热器外罩传热性能的实验研究，指出外罩高度、通气率对高频焊翅片管散热器传热性能的影响，为设计、选用与加工制造提供实验数据．