挤出型3D打印混凝土力学性能研究进展

介绍了3D打印混凝土的特点与前景,综述了挤出型工艺的3D打印混凝土的压、拉、折、剪基本力学性能以及增强措施。研究表明:打印层在喷嘴的挤压作用下密实度有所提高,但同时层间易形成薄弱界面,造成性能的各向异性,通过调整胶凝材料、掺入纤维、优化工艺、水浴养护、布筋等措施能有效改善。此外,提出了还需进一步研究的问题。     

Optimization of PEMFC system operating conditions based on neural network and PSO to achieve the best system performance

PEMFC system is a complex new clean power system. Based on MATLAB/Simulink, this paper develops a system-level dynamic model of PEMFC, including the gas supply system, hydrogen supply system, hydrothermal management system, and electric stack. The neural network fits the electric stack model to the simulation data. The effects of different operating conditions on the PEMFC stack power and system efficiency are analyzed. Combining the power of the reactor and the system efficiency to define the integrated performance index, the particle swarm optimization (PSO) algorithm is introduced to optimize the power density and system efficiency of the PEMFC with multiple objectives. The final optimal operating point increases the power density and system efficiency by 1.33% and 12.8%, respectively, which maximizes the output performance and reduces the parasitic power.     

直角坐标在软件开发中的应用研究

为简化不同软件开发技术处理界面中组件关系的算法,增强使用数学模型解决软件开发中算法设计的能力,全面分析和总结直角坐标系在界面设计中的应用十分必要。通过对不同开发技术处理界面设计的分析,界面中组件位置关系实质上都可以转化为坐标关系的计算。本文列举了直角坐标系在Python编程、Android编程、Java编程和Unity编程中的应用,以期给相应的算法设计提供借鉴思路。     

Data requirements for improving the Quantitative Risk Assessment of liquid hydrogen storage systems

Quantitative Risk Assessment (QRA) supports the development of risk-informed safety codes and standards which are employed to enable the safe deployment of hydrogen technologies essential to decarbonize the transportation sector. System reliability data is a necessary input for rigorous QRA. The lack of reliability data for bulk liquid hydrogen (LH₂) storage systems located on site at fueling stations limits the use of QRAs. In turn, this hinders the ability to develop the necessary safety codes and standards that enable worldwide deployment of these stations. Through a QRA-based analysis of a LH₂ storage system, this work focuses on identifying relevant scenario and probability data currently available and ascertaining future data collection requirements regarding risks specific to liquid hydrogen releases. The work developed consists of the analysis of a general bulk LH₂ storage system design located at a hydrogen fueling station. Failure Mode and Effect Analysis (FMEA) and traditional QRA modeling tools such as Event Sequence Diagrams (ESD) and Fault Tree Analysis (FTA) are employed to identify, rank, and model risk scenarios related to the release of LH₂. Based on this analysis, scenario and reliability data needs to add LH₂-related components to QRA are identified with the purpose of improving the future safety and risk assessment of these systems.     

Optimal operating conditions to maximize the net power of polymer electrolyte membrane fuel cells: The stack-system interface of a commercial 18 kW module

A new, experimental method based on air flow rate rather than current is presented to optimize operating parameters for the stacks and systems of proton exchange membrane fuel cells (PEMFCs) for maximizing their net power. This approach is illustrated for a commercial 18 kW PEMFC module. The impact of contamination pressure drop across the cathode air filter is also investigated on the compressor behavior. It is further shown that a 4V reduction in the compressor voltage reduces its power consumption by 9.1%. Using the 3D graphs of the power-pressure-flow data, it is found that the stack pressure of 180 kPaa is superior to the higher tested pressures as it enhances the net power by 7.0 and 13.7% at different conditions. Application of the present study will lead to the development of PEMFCs with higher power output by optimizing stack pressure, stoichiometry and air flow to properly deliver the system design specifications.     

一种融合社交信任的矩阵分解推荐算法

为了解决数据稀疏性对推荐算法预测准确度的影响,本文提出了一种融合社交信任的矩阵分解推荐算法。在相关数据集上实验结果表明,预测的平均绝对误差和均方根误差都得到了明显的改善。     

省级安播监管系统设计与实现

在广电总局和省局指示精神的指导下,江苏有线三网融合枢纽中心建成了省中心集中汇聚,分中心独立管控的三级安播监管体系。本文从建设目标,网络结构,系统组成等方面介绍了江苏有线安播监管系统,提出了“播监控三维一体”,“省市县三位一体”的省级全覆盖式安播监管体系解决方案。     

Laboratory Studies to Determine Suitable Chemicals to Improve Oil Recovery from Garzan Oil Field

Garzan oil field is located at the south east of Turkey. It is a mature oil field and the reservoir is fractured carbonate reservoir. After producing about 1% original oil in place (OOIP) reservoir pressure started to decline. Waterflooding was started in order to support reservoir pressure and also to enhance oil production in 1960. Waterflooding improved the oil recovery but after years of flooding water breakthrough at the production wells was observed. This increased the water/oil ratio at the production wells. In order to enhance oil recovery again different techniques were investigated. Chemical enhanced oil recovery (EOR) methods are gaining attention all over the world for oil recovery. Surfactant injection is an effective way for interfacial tension (IFT) reduction and wettability reversal. In this study, 31 different types of chemicals were studied to specify the effects on oil production. This paper presents solubility of surfactants in brine, IFT and contact angle measurements, imbibition tests, and lastly core flooding experiments. Most of the chemicals were incompatible with Garzan formation water, which has high divalent ion concentration. In this case, the usage of 2-propanol as co-surfactant yielded successful results for stability of the selected chemical solutions. The results of the wettability test indicated that both tested cationic and anionic surfactants altered the wettability of the carbonate rock from oil-wet to intermediate-wet. The maximum oil recovery by imbibition test was reached when core was exposed 1-ethly ionic liquid after imbibition in formation water. Also, after core flooding test, it is concluded that considerable amount of oil can be recovered from Garzan reservoir by waterflooding alone if adverse effects of natural fractures could be eliminated.     

油田开发后期强化注水工艺技术

在油田注水开发的后期,油井的含水率随注水量增加而升高,注水井与采油井的连通状态发生动态改变,产量进入快速递减阶段,因此必须动态监测油水情况,实施有助于提升油田采收率的措施和工业技术,才能减缓产量递减速率,使油井维持长期稳定生产能力,获取油气产能的最大效益,达到开发后期油藏生产指标。本次对开发后期油藏开采工作中所面临的难题进行了相应的分析,以提高剩余油的开发率,达到油田开发指标。     

中国与日本兽药残留限量标准比较分析研究

目的研究我国与日本兽药残留限量标准的异同。方法根据中华人民共和国国农业部第235号公告以及日本肯定列表、厚生劳动省第370号公告,比较两国法律法规涉及的禁用与限量物质清单在兽药种类、残留食品种类、残留限量指标值等方面的异同。结果我国兽药残留限量标准涉及123种兽药、3大类食品、12种动物与9种靶组织、550个限量指标,日本则涉及243种兽药、4大类食品、16种动物与8种靶组织、3705个限量指标。两者相比,我国83种兽药与日本相同, 445个限量指标与日本810个限量指标具有可比性。在中日标准涉及的具有可比性的限量指标中,我国有215个指标与日本等同,有80个指标比日本严格,有139个指标比日本宽松。结论在兽药残留限量标准涉及的可比指标值方面,我国二分之一的指标值与日本对应指标值是等同的。