Phase and microstructure evolution of Sc2O3–CeO2 –ZrO2ceramics in Na2SO4 + V2O5 molten salts

In this study, the destabilization resistance of Sc₂O₃ and CeO₂ co-stabilized ZrO₂ (SCZ) ceramics was tested in Na₂SO₄ + V₂O₅ molten salts at 750°C–1100 °C. The phase structure and microstructure evolution of the samples during the hot corrosion testing were analyzed with X-ray diffraction (XRD), Raman spectra, scanning electron microscopy (SEM), energy dispersive X-ray spectrum (EDS), and X-ray photoelectron spectroscopy (XPS). Results showed that the destabilization of SCZ ceramics at 750 °C was the result of the chemical reaction with V₂O₅ to produce m-ZrO₂ and CeVO₄, and little ScVO₄ was detected in the Sc₂O₃-rich SCZ ceramics. The primary corrosion products at 900 °C and 1100 °C were CeO₂ and m-ZrO₂ due to the mineralization effect. The Sc₂O₃-rich SCZ ceramics exhibited excellent degradation resistance and phase stability owing to the enhanced bond strength and the decreased size misfit between Zr⁴⁺ and Sc³⁺. The destabilization mechanism of SCZ ceramic under hot corrosion was also discussed.     

Effect of Ge on microstructure and mechanical properties of Ti3SiC2/Al2O3 composites

Owing to the good physicochemical compatibility and complementary mechanical properties of Ti₃SiC₂ and Al₂O₃, Ti₃SiC₂/Al₂O₃ composites are considered as ideal structural materials. However, TiC and TiSi₂ typically coexist during the synthesis of Ti₃SiC₂/Al₂O₃ composites through an in-situ reaction, which adversely affects the mechanical properties of the resulting composites. In this study, Ti₃SiC₂/Al₂O₃ composites were prepared via in-situ hot pressing sintering at 1450 °C. Ge, which was used as a sintering aid, improved the purity and mechanical properties of the Ti₃SiC₂/Al₂O₃ composites. This is because Ge replaced some of the Si atoms to compensate the evaporation loss of Si to form Ti₃(Si_1-xGe_x)C₂, which showed a crystal structure similar to that of Ti₃SiC₂. Furthermore, the molten Ge accelerated the diffusion reaction of the raw materials, increasing the overall density of the Ti₃SiC₂/Al₂O₃ composites. The optimum Ge amount for improving the mechanical properties of the composites was found to be 0.3 mol. The flexural strength, fracture toughness, and microhardness of the composite with the optimum Ge amount were 640.2 MPa, 6.57 MPa m^1/2, and 16.21 GPa, respectively. The formation of Ti₃(Si_1-xGe_x)C₂ was confirmed by carrying out X-ray diffraction, energy dispersive spectroscopy, and transmission electron microscopy analyses. A model crystal structure of Ti₃(Si_1-xGe_x)C₂ doped with 0.3 mol Ge was established by calculating the solid solubility of Ge.     

Dry Fractionation Approach in Concentrating Tocopherols and Tocotrienols from Palm Fatty Acid Distillate: A Green Pretreatment Process for Vitamin E Extraction

Palm fatty acid distillate (PFAD) is a rich source of vitamin E. As compared to other vegetable oil, PFAD has higher tocotrienol (70–80%) over tocopherol content, which makes it a valuable source for vitamin E extraction. Current vitamin E extraction methods are not sustainable due to the intensive usage of chemical and high operational cost. Hence, the present study investigated for the first time using dry fractionation process as a green and economical pretreatment method for separating solid fraction (stearin) and liquid fraction (olein) in order to concentrate vitamin E from PFAD in olein fraction. We examined the dry fractionation conditions: crystallization ending temperature (36–44 °C), cooling rate (0.3 and 1.5°C min⁻¹), stirring speed (20–125 rpm), and holding time (0–60 min) on the composition of unsaturated and saturated fatty acids as well as vitamin E content in liquid fraction (olein) and solid fraction (stearin) using gas chromatography and high performance liquid chromatography, respectively. In most of these conditions, vitamin E was ultimately higher in olein fraction as compared to stearin fraction, which is correlated with the high degree of unsaturation. Under a cooling rate of 0.3°C min⁻¹, 90 rpm stirring speed, and ending crystallization of 38 °C, the highest vitamin E rich olein fraction was attained with 1479 ± 10.51 ppm in 50 g olein fraction as compared to 1366 ± 7.94 ppm in 500 g of unfractionated PFAD.     

爆破工程费用计算方法探讨

爆破工程具有周期短、自成完整体系、技术管理严格的特点,但在费用管理上需进一步规范与整顿。本文阐述了工程费用的构成、调整及爆破工程费用的计算方法。     

Italian translation,validation, and repeatability of Standard Patient Evaluation of Eye Dryness (SPEED) Questionnaire

PurposeThe assessment of symptoms of dry eye disease using a questionnaire is an effective and simple method of quantifying symptoms. The aim of this study was to translate the SPEED questionnaire and adapt it for the Italian language and verify the main psychometric performance of the translated version, including repeatability and agreement.MethodsThe SPEED questionnaire was translated into Italian following a standard methodology. The resulting questionnaire was administered to 206 adult participants in order to perform a validation analysis. A subgroup of 82 participants was retested after one week to give a repeatability and agreement assessment.ResultsInternal consistency showed an alpha of 0.852 (95% CI 0.818–0.881) and no unnecessary items. The factor analysis showed a saturation for three main factors related to (i) Dryness and Soreness, (ii) Fatigue, and (iii) Burning. Repeatability was high, with a CCC of 0.896 (95% CI 0.844–0.931). Agreement analysis showed no significant bias between sessions and an interval of agreement of 5 points for SPEED score.ConclusionThe translation and adaptation of the SPEED questionnaire for the Italian language have demonstrated good psychometric properties for the translated questionnaire, confirming and expanding the original psychometric characteristics. Consequently, the SPEED questionnaire could be used to measure the presence of symptoms of dry eye quantitatively.     

爆炸排淤填石法中淤泥的本构模型

以爆炸排淤填石法为背景 ,对不同应变率阶段淤泥的本构模型进行了分析 ,利用ANSYS/LS-DYNA动态有限元分析程序对所选择的模型进行验证和确认。计算和分析结果表明 :在形成爆炸空腔的高应变率阶段 ,淤泥表现为理想不可压缩流体的性质 ;在小药量小抵抗线条件下 ,甚至在淤泥自重作用下的较低应变率变形阶段 ,其黏性效应也可以忽略不计。     

Nickel‒cobalt bimetallic catalysts prepared from hydrotalcite-like compounds for dry reforming of methane

Ni–Co/Mg(Al)O alloy catalysts with different Co/Ni molar ratios have been prepared from Ni- and Co-substituted Mg–Al hydrotalcite-like compounds (HTlcs) as precursors and tested for dry reforming of methane. The XRD characterization shows that Ni–Co–Mg–Al HTlcs are decomposed by calcination into Mg(Ni,Co,Al)O solid solution, and by reduction finely dispersed alloy particles are formed. H₂-TPR indicates a strong interaction between nickel/cobalt oxides and magnesia, and the presence of cobalt in Mg(Ni,Co,Al)O enhances the metal-support interaction. STEM-EDX analysis reveals that nickel and cobalt cations are homogeneously distributed in the HTlcs precursor and in the derived solid solution, and by reduction the resulting Ni–Co alloy particles are composition-uniform. The Ni–Co/Mg(Al)O alloy catalysts exhibit relatively high activity and stability at severe conditions, i.e., a medium temperature of 600 °C and a high space velocity of 120000 mL g^?1 h^?1. In comparison to monometallic Ni catalyst, Ni–Co alloying effectively inhibits methane decomposition and coke deposition, leading to a marked enhancement of catalytic stability. From CO₂-TPD and TPSR, it is suggested that alloying Ni with Co favors the CO₂ adsorption/activation and promotes the elimination of carbon species, thus improving the coke resistance. Furthermore, a high and stable activity with low coking is demonstrated at 750 °C. The hydrotalcite-derived Ni–Co/Mg(Al)O catalysts show better catalytic performance than many of the reported Ni–Co catalysts, which can be attributed to the formation of Ni–Co alloy with uniform composition, proper size, and strong metal-support interaction as well as the presence of basic Mg(Al)O as support.     

Non-additive sintering of Si2N2O ceramic with enhanced high-temperature strength,oxidation resistance,and dielectric properties

The high-temperature mechanical and dielectric properties of Si₂N₂O ceramics are often limited by the introduction of a sintering aid. Herein, dense Si₂N₂O was prepared at 1700 °C by hot-pressing oxidized amorphous Si₃N₄ powder without sintering additives. A homogeneous network with short-range order and a SiN₃O structure was formed in the oxidized amorphous Si₃N₄ powder during the hot-pressing process. Si₂N₂O crystals preferentially nucleated at positions within the SiN₃O structure and grew into rod-like and plate-like grains. Fully dense ceramics with mainly crystalline Si₂N₂O and some residual amorphous phases were obtained. The as-prepared Si₂N₂O possessed a good flexural strength of 311 ± 14.9 MPa at 1400 °C, oxidation resistance at 1500 °C, and a low dielectric loss tangent of less than 5 × 10⁻³ at 1000 °C.     

Densification and joining of a (HfTaZrNbTi)C high-entropy ceramic by hot pressing

A bulk (Hf_0.2Ta_0.2Zr_0.2Nb_0.2Ti_0.2)C high-entropy ceramic (HEC) with a high density was prepared by hot pressing (HP), and through a robust joining technique, large-sized piece was fabricated. A hot-pressed carbide HEC with a single-phase and homogeneous composition was obtained at the sintering temperatures from 1800 to 1950 °C for 30 min under a pressure of 30 MPa. The influence of sintering temperature on the mechanical properties of the HEC was investigated, and the flexural and compressive strengths were reported. Additionally, the feasibility of active brazing of this HEC was studied and solid joints with high shear strength were obtained by atomic diffusion and chemical reaction at the interface, providing a key approach to fabricate complex components of HECs.     

Analysis of predictor equations for determining the blast-induced vibration in rock blasting

The paper proposes a new empirical correlation designed to complement the “site laws” currently used to evaluate the attenuation in the rock masses of vibrations induced by rock blasting. The formula contains a deformed exponential known as the K-exponential, which seems to well represent a large number of both natural and artificial phenomena ranging from astrophysics to quantum mechanics, with some extension in the field of economics and finance. Experimental validation of the formula was performed via the analysis of vibration data covering a number of case studies, which differed in terms of both operation and rock type. A total of 12 experimental cases were analysed and the proposed formulation exhibited a good performance in 11 of them. In particular, the proposed law, which was built using blast test data, produced very good approximations of the points representing the vibration measurements and would thus be useful in organising production blasts. However, the developed formula was found to work less well when a correlation obtained for a given site was applied to another presenting similar types of rocks and operations, and thus should not be employed in the absence of measurements from test data.