Co3O4/4A分子筛活化PMS处理高盐AO7废水研究

采用浸渍-焙烧法制备Co₃O₄/4A分子筛复合催化剂,用于活化过一硫酸盐（PMS）处理高盐酸性橙7（AO7）废水。采用扫描电镜、X-射线衍射仪、红外光谱仪等对复合催化剂进行表征,同时考察其稳定性。考察复合催化剂活化PMS对AO7模拟废水的处理效果,结果表明,当Co₃O₄/4A分子筛投加量为0.2 g/L、PMS投加量为0.7 mmol/L、pH为9时,高盐（Na₂SO₄,10 g/L）废水中AO7浓度可在20 min内由15 mg/L左右降至接近0,去除率达99%以上,同时催化剂钴离子溶出量约为0.36 mg/L,低于《地表水环境质量标准》（GB3838-2002）中规定的1 000μg/L。     

基于基站扫频的WCDMA网络干扰排查实践

文章以无线频谱理论为依据,提出了基于基站扫频的WCDMA网络干扰分析与排查方法,介绍了该方法的优势与干扰分析定位流程,并给出了几个典型的干扰排查案例,最后对其降本增效的价值进行了评估。     

浙江省电力公司配网生产管理系统纵向接入国网PMS

分析了国网生产管理系统（PMS）和浙江省电力公司配网电力生产管理系统（XPMS）功能位置编码规则；深入研究了PMS和XPMS数据表的差异；通过2套系统在设备功能位置、数据表字段等方面的系统对比分析，为浙电XPMS纵向接入国网PMS．实现数据共享提供了理论基础。     

地理标志食品安全监管研究

地理标志为WTO-TRIPS协议中七个知识产权形式之一,它以行业团体形式较好地引导企业发展安全、生态,传统的食品,通过控制食品等级质量与数量以确保其品质与信誉,然而,我国地理标志食品业出现一系列食品安全事件,严重破坏了地理标志品牌形象。地理标志食品安全监管研究是以行业监管为主,以企业自律为辅,在地理标志食品安全监管体系的基础上,在生产监管方面,使用良好的生产操作规范与安全控制技术;在品牌管理上,运用CS品牌经营理念;在市场监管方面,推行食品溯源制度,开发PMS平台管理信息系统,以保障自然传统食品特色,把最好、最安全的地理标志食品提供给消费者。     

An overview of instrumentation and control systems of a Korea standard nuclear power plant: A signal interface standpoint

This paper presents an overview of instrumentation and control (I&C) systems of a pressurized water reactor (PWR) type nuclear power plant (NPP) in Korea. Yonggwang unit 3, which was constructed as a basis model for a Korea standard nuclear power plant (KSNP), is selected as an example for the presentation. This overview is derived from analyzing the I&C systems based on a top-down approach. The I&C systems consist of 30 systems. The 183 I&C cabinets are also analyzed and mapped to the systems. The overview is focused on an interface between the systems and the cabinets. This information will be used to understand the implementation of the I&C systems and to group the systems for an upgrade.     

PMS/PZN相对量对PZNT压电陶瓷的影响

采用二次合成法合成了不同PMS/PZN比例的PMS-PZN-PZT系压电陶瓷,并研究了不同的PMS/PZN比例对所研究体系压电陶瓷显微结构和性能的影响。当PMS/PZN等于0.285时,性能最优:机电耦合系数、压电常数、机械品质因数、介电损耗及居里温度分别为0.594、290 pC/N、1 084、0.003 8、350℃,继续对其进行掺杂改性,有望用于制备大功率的压电变压器。     

A Case‐Based Reasoning system for complex medical diagnosis

A Case‐Based Reasoning (CBR) system for medical diagnosis mimics the way doctors make a diagnosis. Given a new case, its accuracy in practice depends on successful retrieval of similar cases. CBR systems have had some success in dealing with simple diseases because of the robustness of their case base. However, their diagnostic accuracy suffers when dealing with complex diseases particularly those that involve multiple domains in medicine. An example of such a condition is Premenstrual syndrome (PMS) as it falls under both gynaecology and psychiatry. To address this issue, the paper proposes a CBR‐based expert system that uses the K‐nearest neighbour (KNN) algorithm to search k similar cases based on the Euclidean distance measure. The novelty of the system is in the design of a flexible auto‐set tolerance (T), which serves as a threshold to extract cases for which similarities are greater than the assigned value of T. A prototype software tool with a menu‐driven Graphical User Interface (GUI) has been developed for case input, analysis of results, and case adaptation within the system. Finally, the performance of the tool has been checked on a set of real‐world PMS cases.     

TiBCN:CNx multilayer coatings deposited by pulsed closed field unbalanced magnetron sputtering

In this study, a combination of nanocomposite and multilayer coating design was investigated in an effort to reduce the coefficient of friction (COF) while maintaining good mechanical properties of the TiBCN coatings. The TiBCN:CN_x coatings consist of TiBCN and CN_x nanolayers which were deposited alternately by reactive sputtering a TiBC composite target (80 mol% TiB₂ + 20 mol% TiC) and a graphite target in an Ar:N₂ mixture using a pulsed closed field unbalanced magnetron sputtering system. Low angle X-ray diffraction and transmission electron microscopy characterizations confirmed that the coatings consist of different bilayer periods in a range of 3.5 to 7.0 nm. The TiBCN layers exhibited a nanocomposite structure, whereas the CN_x layers were in an amorphous state. The mechanical properties and wear resistance of the TiBCN:CN_x multilayer coatings were investigated using nanoindentation and ball-on-disk wear test. The TiBCN:CN_x coatings exhibited high hardness in a range of 20-30 GPa. The highest hardness of 30 GPa was achieved in the coating with a bilayer period of 4.5 nm. A low COF of 0.17 sliding against a WC-Co ball was obtained at a bilayer period of 4.5 nm, which is much lower than those of the single layer TiBCN and TiBC nanocomposite coatings (0.55-0.7).     

应用网络化信息管理系统实现设备巡检管理现代化

本文简要叙述了我单位应用设备巡检管理PMS系统的原因及应用效果,证明了根据实际,不断引入先进的管理模式可快速提高企业设备管理现代化水平。     

PMS离线巡检系统在设备状态预知预测与点检管理中的研究与开发

设备故障诊断与预知维修系统（PMS）是使点检工作信息化的重要工具,借助该系统可以很好的记录设备点检信息,并可以进一步分析设备劣化的原因和趋势,起到预检预控作用。该系统在济钢设备点检工作中运行顺利,取得了较好的效果。