Aqueous dispersion of 1D van der Waals Mo6S3I6 crystal using biocompatible tri-block copolymer

To achieve the stable dispersion of 1D van der Waals crystal Mo₆S₃I₆ in aqueous media, the tri-block copolymer (Poloxamer) is used as dispersant. The head group of Poloxamer, hydrophobic polypropylene oxide parts can be adsorbed to Mo₆S₃I₆ surface by hydrophobic interaction and the tail group with hydrophilic polyethylene oxide exposed to the outside of the Mo₆S₃I₆ is soluble in water and can form sufficient steric hindrance, resulting in stable aqueous dispersion in nm scale. The excellent biocompatibility of aqueous dispersed nm scale 1D Mo₆S₃I₆ was demonstrated by effective proliferation of C2C12 cells.     

星点设计-效应面法优化盐酸川芎嗪眼用温度敏感型原位凝胶的处方

探讨星点设计-效应面法优化盐酸川芎嗪眼用温度敏感型原位凝胶的处方。采用泊洛沙姆407和泊洛沙姆188为温敏材料,以模拟泪液稀释前后的溶液-凝胶相转变温度为考察指标,采用星点设计-效应面法对处方进行优化并进行验证。经过优化的处方组成为22.5%泊洛沙姆407和5%泊洛沙姆188;优化处方制备的凝胶在26.9℃为自由流动的液体,经模拟泪液稀释后在32.5℃转变为凝胶。星点设计-效应面法适用于盐酸川芎嗪眼用温度敏感型原位凝胶的处方优化,所建立的模型预测性良好,该眼用温敏凝胶符合眼部应用要求。     

Enhanced Oral Bioavailability of Ibuprofen in Rats by Poloxamer Gel Using Poloxamer 188 and Menthol

To improve the oral bioavailability of poorly water-soluble ibuprofen with poloxamer and menthol, the effects of menthol and poloxamer 188 on the aqueous solubility of ibuprofen were investigated. The dissolution and pharmacokinetic study of ibuprofen delivered by the ibuprofen-loaded preparations composed of poloxamer 188 and menthol were then performed. In the absence of poloxamer, the solubility of ibuprofen increased until the ratio of menthol to ibuprofen increased from 0:10 to 4:6 followed by an abrupt decrease in solubility above the ratio of 4:6, indicating that four parts menthol formed eutectic mixture with six parts ibuprofen. In the presence of poloxamer, the solutions with the same ratio of menthol to ibuprofen showed an abrupt increase in the solubility of ibuprofen. The poloxamer gel with menthol/ibuprofen ratio of 1:9 and higher than 15% poloxamer 188 showed the maximum solubility of ibuprofen, 1.2 mg/mL. The simultaneous addition of menthol and poloxamer 188 significantly improved the dissolution rates of ibuprofen from aqueous solution due to the ibuprofen solubility-improving effect of menthol in the presence of poloxamer. Furthermore, the ibuprofen-loaded preparation with menthol and poloxamer 188 gave significantly higher initial plasma concentrations, Cmax, and AUC of ibuprofen than did the preparation without menthol and poloxamer 188, indicating that the simultaneous addition of menthol and poloxamer 188 could improve the oral bioavailability of ibuprofen in rats. In modern pain management it is always desirable for the ibuprofen-loaded preparation with poloxamer 188 and menthol to show a rapid onset of action with a minimal phase of lag time to feel the decreased pain. From an industry point of view, it is more desirable for a formulation to be fast acting, easy to use, and cost effective. Thus, the ibuprofen-loaded preparation with poloxamer 188 and menthol was a more effective oral dosage form for poorly water-soluble ibuprofen.     

Release of Ciprofloxacin from Chondroitin 6-Sulfate-Graft-Poloxamer Hydrogel In Vitro for Ophthalmic Drug Delivery

The system was designed to use Poloxamer as a vehicle for ophthalmic drug delivery using in situ gel formation property. To enhance the wound healing and cell adhesion as well as transparency of Poloxamer hydrogel, chondroitin 6-sulfate (C6S) was introduced into Poloxamer. For this purpose, mono amine-terminated Poloxamer (MATP), which was end-capped with ethylene amine group only in one side of terminal hydroxyl groups of Poloxamer, was synthesized. Subsequently, C6S-graft-Poloxamer copolymer (C6S-g-Poloxamer) was prepared by reaction between the amine groups of MATP and carboxyl groups of C6S in the presence of 1-ethyl-3-(3-dimethylaminopropyl)-carboimide (EDC). The coupling of MATP with C6S was clarified by ¹H-NMR and FT-IR spectroscopy. The gelation temperature of graft copolymers was determined by measuring the temperature at which immobility of the meniscus in each solution was first noted. Release behavior of ciprofloxacin from C6S-g-Poloxamer hydrogel in vitro was investigated as a function of C6S content in the graft copolymer by a spectrophotometric assay at 287 nm using an UV spectrophotometer. Differences in the adhesion and morphology of human lens cell between Poloxamer- and C6S-g-Poloxamer-coated surfaces were also investigated. The gelation temperatures of C6S-g-Poloxamer copolymers were lowered with increasing of the concentration of the copolymer and decreasing of C6S content. The release of ciprofloxacin from the graft copolymer was sustained compared with Poloxamer itself and decreased with increasing the content of C6S in the copolymer due to the in situ gel formation of the copolymer and viscous properties of C6S. Human lens cells (B3) adhered to C6S-g-Poloxamer-coated surface were observed as transformed shapes after 2 days. The bioadhesive and thermally gelling of these graft copolymers will be expected to be an excellent drug carrier for the prolonged delivery to surface of the eye.     

Physicochemical characterization of diclofenac sodium-loaded poloxamer gel as a rectal delivery system with fast absorption

Rectal poloxamer gel systems composed of poloxamers and bioadhesive polymers were easy to administer to the anus and were mucoadhesive to the rectal tissues without leakage after the dose. However, a poloxamer gel containing diclofenac sodium could not be developed using bioadhesive polymers, since the drug was precipitated in this preparation. To develop a poloxamer gel using sodium chloride instead of bioadhesive polymers, the physicochemical properties such as gelation temperature, gel strength, and bioadhesive force of various formulations composed of diclofenac sodium, poloxamers, and sodium chloride were investigated. Furthermore, the pharmacokinetic study of diclofenac sodium delivered by the poloxamer gel was performed. Diclofenac sodium significantly increased the gelation temperature and weakened the gel strength and bioadhesive force, while sodium chloride did the opposite. The poloxamer gels with less than 1.0% sodium chloride, in which the drug was not precipitated, were inserted into the rectum without difficulty and leakage, and were retained in the rectum of rats for at least 6 hr. Furthermore, poloxamer gel gave significantly higher initial plasma concentrations and faster T_max of diclofenac sodium than did solid suppository, indicating that drug from poloxamer gel could be absorbed faster than that from the solid one in rats. Our results suggested that a rectal poloxamer gel system with sodium chloride and poloxamers was a more physically stable, convenient, and effective rectal dosage form for diclofenac sodium.     

Formulation and development of ophthalmic in situ gel for the treatment ocular inflammation and infection using application of quality by design concept

Context: The conventional liquid ophthalmic delivery systems exhibit short pre-corneal residence time and the relative impermeability to the cornea which leads to poor ocular bioavailability.

Objective: The aim of this study was to apply quality by design (QbD) for development of dexamethasone sodium phosphate (DSP) and tobramycin sulfate (TS)-loaded thermoresponsive ophthalmic in situ gel containing Poloxamer 407 and hydroxyl propyl methyl cellulose (HPMC) K4M for prolonging the pre-corneal residence time, ocular bioavability and decreases the frequency of administration of dosage form. The material attributes and the critical quality attributes (CQA) of the in situ gel were identified. Central composite design (CCD) was adopted to optimize the formulation.

Materials and methods: The ophthalmic in situ forming gels were prepared by cold method. Materials attributes were the amount of Poloxamer 407 and HPMC and CQA identified were Gel strength, mucoadhesive index, gelation temperature and % of drug release of both drug.

Results and discussion: Optimized batch (F*) containing 16.75% poloxamer 407 and 0.54% HPMC K4M were exhibited all results in acceptable limits. Compared with the marketed formulation, optimized in situ gel showed delayed T_max, improved C_max and AUC in rabbit aqueous humor, suggesting the sustained drug release and better corneal penetration and absorption.

Conclusion: According to the study, it could be concluded that DSP and TS would be successfully formulated as in situ gelling mucoadhesive system for the treatment of steroid responsive eye infections with the properties of sustained drug release, prolonged ocular retention and improved corneal penetration.     

Development of a thermogelling ophthalmic formulation of cysteine

Preliminary studies carried out with cysteine 2% solution showed that pH adjusted to isoelectrical pH (i.e., 4.9) led to enhance stability during autoclaving and ensured no significant degradation during at least 14 days if stored at 2-8°C protected from light. Optimized formulations combined either cysteine(2%)/Poloxamer407(16.5%) or cysteine(2%)/Poloxamer407(20%)/Poloxamer188(5%) and were characterized by an adequate temperature of gelification (TG) (25.9°C and 26.9°C, respectively), an important gel strength (5.1daN and 5.3daN, respectively) and a drastic increase in the apparent viscosity between 24°C and 32°C (multiplication factor of 78 and 77-fold, respectively). Cysteine addition produced only slight but significant decrease in temperature of gelification and increase in gel strength.     

Influence of Poloxamer 407 on Surface Properties of Aqueous Solutions of Polysorbate Surfactants

Owing to their ability to adsorb at interfaces, polysorbates have an important role in pharmaceutical formulations. Because surfactant mixtures can have improved properties, it was hypothesized in this work that introduction of poloxamer 407 to aqueous solutions of polysorbates (polysorbate 60, polysorbate 80 and polysorbate 85) might improve their surface properties. Nonideal behavior of surfactant mixtures at the air/water interface was investigated using Rosen's model and recently introduced method for the determination and quantification of nonideal behavior regarding surface tension reduction and adsorption effectiveness. Although nonideal behavior was noticed in all mixed monolayers, it was shown that the structure of the hydrophobic domain of the polysorbates and the conformation of poloxamer 407 at the interface have strong influence on the nonideality.     

Effect of water-soluble carriers on dissolution characteristics of nifedipine solid dispersions

Solid dispersions of nifedipine (NP) with polyethylene glycols (PEG4000 and PEG6000), hydroxypropyl-β-cyclodextrin (HPβCD), and poloxamer 407 (PXM 407) in four mixing ratios were prepared by melting, solvent, and kneading methods in order to improve the dissolution of NP. The enhancement of the dissolution rate and the time for 80% NP dissolution T_80% depended on the mixing ratio and the preparation method. The highest dissolution rate and the T_80% as short as 15 min were obtained from PXM 407 solid dispersion prepared by the melting method at the mixing ratio of 1:10. The X-ray diffraction (XRD) patterns of solid dispersions at higher proportions of carriers demonstrated consistent with the results from differential scanning calorimetric (DSC) thermograms that NP existed in the amorphous state. The wettability and solubility were markedly improved in the PXM 407 system. The presence of intermolecular hydrogen bonding between NP and PEGs and between HPβCD and PXM 407 was shown by infrared (IR) spectroscopy.     

Selective Synthesis of Polyoxyethylene–Polyoxypropylene Block Copolymer (Poloxamer) Fatty Acid Monoesters Over Homogeneous Organotin Catalyst

The synthesis of selected polyoxyethylene–polyoxypropylene block copolymer (poloxamer) fatty acid monoesters is presented. Organotin homogeneous catalyst Sn bis(2‐ethylhexanoate) effectively catalyzed the esterification reaction of (EO)–(PO)–(EO) block copolymer (poloxamer) with fatty acids. The reaction proceeded in high yield and high selectivity to monoesters. Content of diesters in final products was below 1 wt%. The new protocol opened up a high yield and high selective method for the synthesis of poloxamer fatty acid monoesters. These products are potentially interesting for industrial applications, e.g. in lubricants, cosmetics and, in particular, as potential emulsifying agents compatible with hydrocarbon bases, such as paraffin.