Advances in solid-state fiber batteries for wearable bioelectronics

Powering wearable bioelectronics with decent skin conformability and wearing comfort is highly desired. Fiber batteries could provide an attractive alternative to traditional rigid ones and present a compelling solution to this problem. In this review, we will discuss the various classes of fiber batteries, including lithium batteries, zinc batteries, and other types of fiber batteries. We will then report the latest research progress on each battery category through its working mechanism, materials usage, structure design, and wearable applications. Finally, we provide insights into current challenges and future applications of fiber batteries, aiming to promote the development of low-cost and high-performance fiber battery technologies for wearable bioelectronics.     

Smart work packaging-enabled constraint-free path re-planning for tower crane in prefabricated products assembly process

Lack of constraint-free crane path planning is one of the critical concerns in the dynamic on-site assembly process of prefabrication housing production (PHP). For decades, researchers and practitioners have endeavored to improve both the efficiency and safety of crane path planning from either static environment or re-planning the path when colliding with constraints or periodically updating the path in the dynamic environment. However, there is a lack of approach related to the in-depth exploration of the nature of dynamic constraints so as to assist the crane operators in making adaptive path re-planning decisions by categorizing and prioritizing constraints. To address this issue, this study develops the smart work packaging (SWP)-enabled constraints optimization service. This service embraces the core characteristics of SWP, including adaptivity, sociability, and autonomy to achieve autonomous initial path planning, networked constraints classification, and adaptive decisions on path re-planning. This service is simulated and verified in the BIM environment, and it is found that SWP-enabled constraints optimization service can generate the constraint-free path when it is necessary.     

Pumped-hydro in Bendigo: Room for wider reform?

As the world adjusts to a rapidly changing climate, interest in renewable energy technologies has increased. One disadvantage of renewables is that they’re only intermittently reliable; when the sun doesn’t shine, or the wind stops blowing the energy generation capacity of these infrastructures tapers off. In light of these changes there has been renewed interest in the creation of Pumped Hydro-Electricity Storage (‘PHES’), which acts as a ‘battery’ storing excess electricity generated when consumption of energy is at its lowest. In addition new technologies allow for legacy infrastructures, that would otherwise be a liability for the community, to now be used in a productive way for projects like PHES. Although there are many exciting opportunities the Bendigo PHES project presents, there is a dearth of regulatory issues for a small-medium scale project like this. This paper will explore the way in which such a project would fit within the national electricity market, as well as the limitations and barriers to implementation it might face before making some brief recommendations on changes that would benefit other such schemes in the future.     

A wavelet-based multi-dimensional temporal recurrent neural network for stencil printing performance prediction

The solder paste printing (SPP) is a critical procedure in a surface mount technology (SMT) based assembly line, which is one of the major attributes to the defect of the printed circuit boards (PCBs). The quality of SPP is influenced by multiple factors, such as the squeegee speed, pressure, the stencil separation speed, cleaning frequency, and cleaning profile. During printing, the printer environment is dynamically varying due to the physical change of solder paste, which can result in a dynamic variation of the relationships between the printing results and the influential factors. To reduce the printing defects, it is critical to understand such dynamic relationships. This research focuses on determining the printing performance during printing by implementing a wavelet filtering-based temporal recurrent neural network. To reduce the noise factor in the solder paste inspection (SPI) data, this research applies a three-dimensional dual-tree complex wavelet transformation for low-pass noise filtering and signal reconstruction. A recurrent neural network is utilized to model the performance prediction with low noise interference. Both printing sequence and process setting information are considered in the proposed recurrent network model. The proposed approach is validated using practical dataset and compared with other commonly used data mining approaches. The results show that the proposed wavelet-based multi-dimensional temporal recurrent neural network can effectively predict the printing process performance and can be a high potential approach in reducing the defects and controlling cleaning frequency. The proposed model is expected to advance the current research in the application of smart manufacturing in surface mount technology.     

The effects of fuel variability on the electrical performance and durability of a solid oxide fuel cell operating on biohythane

Biohythane is typically composed of 60/30/10 vol% CH₄/CO₂/H₂ and can be produced via two-stage anaerobic digestion of renewable and low carbon biomass with much greater efficiency compared with CH₄/CO₂ biogas. This work investigates the effects of fuel variability on the electrical performance and fuel processing of a commercially available anode supported solid oxide fuel cell (SOFC) operating on biohythane mixtures at 750 °C. Cell electrical performance was characterised using current-voltage curves and electrochemical impedance spectroscopy. Fuel processing was characterised using quadrupole mass spectroscopy. It is shown that when H₂/CO₂ is blended with CH₄ to make biohythane, the SOFC efficiency is significantly increased, high SOFC durability is achieved, and there are considerable savings in CH₄ consumption. Enhanced electrical performance was due to the additional presence of H₂ and promotion of CH₄ dry reforming, the reverse Boudouard and reverse water-gas shift reactions. These processes alleviated carbon deposition and promoted electrochemical oxidation of H₂ as the primary power production pathway. Substituting 50 vol% CH₄ with 25/75 vol% H₂/CO₂ was shown to increase cell power output by 81.6% at 0.8 V compared with pure CH₄. This corresponded to a 3.4-fold increase in the overall energy conversion efficiency and a 72% decrease in CH₄ consumption. A 260 h durability test demonstrated very high cell durability when operating on a typical 60/30/10 vol% CH₄/CO₂/H₂ biohythane mixture under high fuel utilisation due to inhibition of carbon deposition. Overall, this work suggests that decarbonising gas grids by substituting natural gas with renewably produced H₂/CO₂ mixtures (rather than pure H₂ derived from fossil fuels), and utilising in SOFC technology, gives considerable gains in energy conversion efficiency and carbon emissions savings.     

Design of regional flexibility markets for electricity: A product classification framework for and application to German pilot projects

With the growing role of distributed energy resources, the electricity network is challenged by numerous technical problems, such as capacity congestion and over- or under-voltage. An often-discussed response, especially in the European zonal electricity system, is to implement regional flexibility markets. We contribute to this discussion by providing a comprehensive classification framework for the design of flexibility products by combining technical requirements with classical auction theory. The framework structures 23 product parameters in four stages of abstraction. By applying the framework to five market approaches used in current German research projects, we demonstrate its usefulness for consistent comparison of flexibility products at a high level of detail. This framework can empower national and international policymakers and practitioners in assessing flexibility markets holistically, thereby facilitating the implementation of sound solutions.     

Malaysia’s electricity market structure in transition

The Malaysian electricity industry evolved from a vertically integrated utility into a single-buyer model, which considered a precursor to deregulation and a competitive market. This study considers electricity sector reform in Malaysia and proposes a market structure for the industry. We focus on the single-buyer model and the pool model for the analysis with the recommendation on reform stages required to ensure a smooth and successful market transition. A smooth transition from regulated market into deregulated market will ensure market stability and sustainability of the energy market. It will also provide enough time for the market participants to adapt and transit from regulated to deregulated energy market.     

Multi-stage power source and grid coordination planning method considering grid uniformity

Given the increasing uncertainties in power supply and load, this paper proposes the concept of power source and grid coordination uniformity planning. In this approach, the standard deviation of the transmission line load rate is considered as the uniformity evaluation index for power source and grid planning. A multi-stage and multi-objective optimization model of the power source and grid expansion planning is established to minimize the comprehensive cost of the entire planning cycle. In this study, the improved particle swarm optimization algorithm and genetic algorithm are combined to solve the model, thus improving the efficiency and accuracy of the solution. The analysis of a simple IEEE Garver’s 6-node system shows that the model and solution method are effective and feasible. Moreover, they are suitable for the coordinated planning of the power source and grid under a diversified nature of power supply and load.     

Potential pitfalls of smart city development: A study on parking mobile applications (apps) in Hong Kong

Smart cities are built upon information and communication technologies (ICTs) to enable a broad range of advanced services. Through a comprehensive literature review, this study identified four pitfalls brought by the pervasive application of ICT, including information insecurity, privacy leakage, information islands, and digital divide. Therefore, a questionnaire survey together with 27 interviews was conducted in Hong Kong to investigate how the public perceived these pitfalls within the context of mobile apps providing real-time parking information which form a major part of smart mobility. System insecurity and privacy leakage were found to arouse worries among the app-users while their awareness of protecting personal data was found to have room for improvement. Islands of real-time parking information occur as a result of the lack of collaboration among private carpark operators. Digital divide existed widely among the disadvantaged groups and the problem cannot be solved by mere provision of ICT facilities. Overall, technologies alone cannot make a city smart or smarter. It is the suitable way in which ICTs are used to serve all citizens that matters.