一种基于FCOS神经网络的小建筑物目标检测方法北大核心

提出了一种基于FCOS神经网络的小建筑物目标检测算法,针对FCOS模型在特征提取阶段提取到的小建筑物目标特征较少问题,引入多尺度检测和可变形卷积方式,加强网络对小建筑物目标的特征提取能力,并通过改进后的SGE注意力机制降低特征图中的干扰噪声权重。改进后的网络可以提取到更多的小建筑物目标特征,对环境干扰噪声的鲁棒性更强。在自己搭建的数据集上进行了实验测试,结果表明,在相同环境下网络改进后建筑物的整体检测准确率提升了1.7%,其中对小建筑物目标提升了3.6%,减少了小建筑物目标漏检、误检的问题。     

Dynamic simulation of hydrogen-based off-grid zero energy buildings with hydrogen storage considering Fanger model thermal comfort

In this study, some locations with different climates, off-grid zero energy buildings with hydrogen energy storage systems are designed, and transient analysis is conducted. These considered buildings supply their electricity consumption without using the electrical grid and PV panels or wind turbines. Also, they supply thermal comfort to occupants by using a vapor compression chiller and humidifier. Domestic hot water of occupants is supplied using solar collectors. For analyzing building's performance and objectives achievement, TRNSYS software is used. Also, for evaluating occupant thermal comfort, the Fanger model is used. The considered building is a one-story building with a 150 m² area. Four occupants are considered. Both of them are seated at rest, and another is seated with light working such as typing. Using the Fanger model equation and MATLAB software, the thermal comfort of occupants is determined. For domestic hot water consumption, verified profiles that vary during 24 h of the day are considered. Achieved results show that for humid and cold cities, PV panels with an area of 73 and 76 m² can be supplied the required electricity of considered building with four occupants and battery state of charge is higher than 50% and 10%, respectively. Moreover, with a suitable air conditioner system, the predicted percentage of dissatisfied (PPD) can be lower than 12% and 8% for humid and cold cities. Therefore, the building can be converted to a zero-energy building using its rooftop area.     

立柱加固型框架大楼的爆破拆除

采用定向控制爆破技术拆除立柱加固型7层框架大楼。为了彻底炸毁加固立柱,确保大楼顺利定向倾倒,通过多次爆破试验确定了炸药单耗、布孔参数和装药结构。为了控制大楼塌落时的触地震动,采取了秒差分区爆破、空中解体、铺垫缓冲层和开挖减震沟等技术措施。爆破过程中进行了震动监测。此外还介绍了起爆顺序、安全防护措施及爆破结果。     

箱形横梁的水压爆破拆除

某电影院大厅内钢筋混凝土箱形横梁长25m,断面尺寸1 6m×2 4m,用水压爆破拆除。通过梁的受力分析得知,为避免横梁的挠度过大,在吊梁拆除后必须另补支撑,以确保水压爆破正常进行。文中对水压爆破炸药用量的计算公式进行了比较和简评。在参考计算结果和考虑厅内环境的基础上,并结合以往水压爆破工程的经验,确定了合理、有效的药量,保证了主体结构的绝对安全。     

基于BIM技术和有限元的检测与分析在PC结构中的应用研究

本文建立了PC结构施工全过程的BIM模型及有限元分析模型,对施工过程进行数值模拟与动态、静态监测,对装配式结构进行了结构性能评价,为结构可视化施工监测提供了技术支持。     

Airborne bacterial assemblage in a zero carbon building: A case study

Currently, there is little information pertaining to the airborne bacterial communities of green buildings. In this case study, the air bacterial community of a zero carbon building (ZCB) in Hong Kong was characterized by targeting the bacterial 16S rRNA gene. Bacteria associated with the outdoor environment dominated the indoor airborne bacterial assemblage, with a modest contribution from bacteria associated with human skin. Differences in overall community diversity, membership, and composition associated with short (day‐to‐day) and long‐term temporal properties were detected, which may have been driven by specific environmental genera and taxa. Furthermore, time‐decay relationships in community membership (based on unweighted UniFrac distances) and composition (based on weighted UniFrac distances) differed depending on the season and sampling location. A Bayesian source‐tracking approach further supported the importance of adjacent outdoor air bacterial assemblage in sourcing the ZCB indoor bioaerosol. Despite the unique building attributes, the ZCB microbial assemblage detected and its temporal characteristics were not dissimilar to that of conventional built environments investigated previously. Future controlled experiments and microbial assemblage investigations of other ZCBs will undoubtedly uncover additional knowledge related to how airborne bacteria in green buildings may be influenced by their distinctive architectural attributes.     

Outcome‐based ventilation: A framework for assessing performance,health, and energy impacts to inform office building ventilation decisions

This article presents an outcome‐based ventilation (OBV) framework, which combines competing ventilation impacts into a monetized loss function ($/occ/h) used to inform ventilation rate decisions. The OBV framework, developed for U.S. offices, considers six outcomes of increasing ventilation: profitable outcomes realized from improvements in occupant work performance and sick leave absenteeism; health outcomes from occupant exposure to outdoor fine particles and ozone; and energy outcomes from electricity and natural gas usage. We used the literature to set low, medium, and high reference values for OBV loss function parameters, and evaluated the framework and outcome‐based ventilation rates using a simulated U.S. office stock dataset and a case study in New York City. With parameters for all outcomes set at medium values derived from literature‐based central estimates, higher ventilation rates’ profitable benefits dominated negative health and energy impacts, and the OBV framework suggested ventilation should be ≥45 L/s/occ, much higher than the baseline ~8.5 L/s/occ rate prescribed by ASHRAE 62.1. Only when combining very low parameter estimates for profitable impacts with very high ones for health and energy impacts were all outcomes on the same order. Even then, however, outcome‐based ventilation rates were often twice the baseline rate or more.     

严寒地区单体建筑太阳能-相变墙系统蓄热特性研究

利用太阳能对水加热并通入相变墙进行蓄热，对减少严寒地区单体建筑供热能耗有重要意义。以大庆市某单体建筑为例，结合该地区太阳能分布特点及建筑热负荷大小，对适用于该地区的太阳能-相变墙系统进行集热与储热能力计算，并采用CFD方法研究单一工况下该系统的热工变化规律及不同热水参数、换热管规格对相变墙蓄热特性的影响。结果表明：该相变墙热稳定性良好，但受自然对流影响，底部相变材料熔化较慢；管径DN25、入口流速0.3m/s、供水温度310.15K、回水温度309.15K、管间距107mm可使相变材料在4小时内完成蓄热，平均节能率为31.8%。研究结果可望为降低严寒地区建筑供热能耗提供新思路。     

Sub‐5 nm Dendrimer Directed Self‐Assembly with Large‐Area Uniform Alignment by Graphoepitaxy

Directed self‐assembly (DSA) using soft materials is an important method for producing periodic nanostructures because it is a simple, cost‐effective process for fabricating high‐resolution patterns. Most of the previously reported DSA methods exploit the self‐assembly of block copolymers, which generates a wide range of nanostructures. In this study, cylinders obtained from supramolecular dendrimer films with a high resolution (<5 nm) exhibit planar ordering over a macroscopic area via guiding topographical templates with a high aspect ratio (>10) and high spatial resolution (≈20 nm) of guiding line patterns. Theoretical and experimental studies reveal that this property is related to geometrical anchoring on the meniscus region and physical surface anchoring on the sidewall. Furthermore, this DSA of dendrimer cylinders is demonstrated by the non‐regular geometry of the patterned template. The macroscopic planar alignment of the dendrimer nanostructure reveals an extremely small feature size (≈4.7 nm) on the wafer scale (>16 cm²). This study is expected to open avenues for the production of a large family of supramolecular dendrimers with different phases and feature dimensions oriented by the DSA approach.     

基于虚拟格网的建筑物点云轮廓线自动提取

在分析现有轮廓线提取方法不足的基础上，提出基于虚拟格网的建筑物轮廓线自动提取方法。该方法利用建筑物点云生成虚拟格网并进行二值填充；采用邻域分析方法进行边界格网的标记与追踪；为了避免边界追踪错误，设计了基于方向的单边缘格网抑制方法及基于距离的连接关系调整方法以改善提取结果质量；根据格网追踪结果，从原始建筑物点云中提取真实轮廓点以保持原始建筑物轮廓形态；采用随机抽样一致性估计及最小二乘拟合方法进行轮廓线规则化处理，实现建筑物轮廓线的自动提取。实验结果表明，该方法能快速从建筑物点云中提取轮廓线，可为建筑物轮廓线的自动提取提供一种可行的解决方案。