Delay compensated control of the Stefan problem and robustness to delay mismatch

This paper presents a control design for the one‐phase Stefan problem under actuator delay via a backstepping method. The Stefan problem represents a liquid‐solid phase change phenomenon which describes the time evolution of a material's temperature profile and the interface position. The actuator delay is modeled by a first‐order hyperbolic partial differential equation (PDE), resulting in a cascaded transport‐diffusion PDE system defined on a time‐varying spatial domain described by an ordinary differential equation (ODE). Two nonlinear backstepping transformations are utilized for the control design. The setpoint restriction is given to guarantee a physical constraint on the proposed controller for the melting process. This constraint ensures the exponential convergence of the moving interface to a setpoint and the exponential stability of the temperature equilibrium profile and the delayed controller in the norm. Furthermore, robustness analysis with respect to the delay mismatch between the plant and the controller is studied, which provides analogous results to the exact compensation by restricting the control gain.     

Approximation-based adaptive fault compensation backstepping control of fractional-order nonlinear systems: An output-feedback scheme

An observer-based adaptive fuzzy backstepping approach is proposed for nonlinear systems with respect to fractional-order differential equations, unmatched uncertainties, unmeasured states, and actuator faults. The approximation capability of fuzzy logic system and minimal learning parameter approaches are applied to identify uncertain functions in a simultaneous manner. For estimating the unavailable conditions, a fuzzy fractional-order state-observer is extended. Applying fault-tolerant approach in a backstepping design methodology would provide a new fault-tolerant adaptive fuzzy output-feedback approach for fractional-order strict-feedback systems. This control structure would assure the considered system stability through selection of the appropriate Lyapunov candidate function. Two numerical simulations are run to exhibit the validity herein.     

Novel fuzzy adaptive finite-time nonsmooth control for uncertain nonlinear systems

In this article, a novel fuzzy adaptive finite-time nonsmooth controller is developed to handle the finite-time tracking problem for a class of uncertain nonlinear systems. Different from traditional fuzzy adaptive approximation methods, proposed method contains only one adaptive parameter, no matter how many states there are in the system. By constructing a new Lyapunov function with prescribed performance bound, the transient and steady performances of control system can be ensured. Further, based on a criterion of finite-time semiglobal practical stability and backstepping technology, a novel fuzzy adaptive finite-time nonsmooth control method is designed. It can be demonstrated that proposed control can effectively ensure tracking error tends to small neighborhood in a finite time. Finally, two examples have been simulated by the proposed control method, and it shows effective tracking performance.     

Multilevel adaptive control of nonlinear interconnected systems

This paper presents an adaptive backstepping-based multilevel approach for the first time to control nonlinear interconnected systems with unknown parameters. The system consists of a nonlinear controller at the first level to neutralize the interaction terms, and some adaptive controllers at the second level, in which the gains are optimally tuned using genetic algorithm. The presented scheme can be used in systems with strong couplings where completely ignoring the interactions leads to problems in performance or stability. In order to test the suitability of the method, two case studies are provided: the uncertain double and triple coupled inverted pendulums connected by springs with unknown parameters. The simulation results show that the method is capable of controlling the system effectively, in both regulation and tracking tasks.     

Adaptive backstepping repetitive learning control design for nonlinear discrete‐time systems with periodic uncertainties

This paper addresses a tracking problem for uncertain nonlinear discrete‐time systems in which the uncertainties, including parametric uncertainty and external disturbance, are periodic with known periodicity. Repetitive learning control (RLC) is an effective tool to deal with periodic unknown components. By using the backstepping procedures, an adaptive RLC law with periodic parameter estimation is designed. The overparameterization problem is overcome by postponing the parameter estimation to the last backstepping step, which could not be easily solved in robust adaptive control. It is shown that the proposed adaptive RLC law without overparameterization can guarantee the perfect tracking and boundedness of the states of the whole closed‐loop systems in presence of periodic uncertainties. In addition, the effectiveness of the developed controller is demonstrated by an implementation example on a single‐link flexible‐joint robot. Copyright © 2014 John Wiley & Sons, Ltd.     

Design of disturbance observer based on adaptive-neural control for large-scale time-delay systems in the presence of actuator fault and unknown dead zone

This article presents an adaptive neural compensation scheme for a class of large-scale time delay nonlinear systems in the presence of unknown dead zone, external disturbances, and actuator faults. In this article, the quadratic Lyapunov–Krasovskii functionals are introduced to tackle the system delays. The unknown functions of the system are estimated by using radial basis function neural networks. Furthermore, a disturbance observer is developed to approximate the external disturbances. The proposed adaptive neural compensation control method is constructed by utilizing a backstepping technique. The boundedness of all the closed-loop signals is guaranteed via Lyapunov analysis and the tracking errors are proved to converge to a small neighborhood of the origin. Simulation results are provided to illustrate the effectiveness of the proposed control approach.     

Controller design for distributed parameter systems with time delays in the boundary feedbacks via the backstepping method

For a distributed parameter system with an input delay in the boundary, a feedback control law is presented by means of the backstepping method. The square integrability of input signal is verified based on the target system. Then, the boundedness and invertibility of the corresponding backstepping transformation are proved under the regularity of system and the admissibility of feedback operator. Thus, the resulting closed-loop system is shown to be exponentially stable. Finally, as an application, a numerical simulation of a one-dimensional Schrödinger equation with a delay input is carried out, and the simulation results demonstrate the effectiveness of the suggested control law.     

Adaptive neural network command filtered backstepping control of pure‐feedback systems in presence of full state constraints

An adaptive neural network (NN) command filtered backstepping control is proposed for the pure‐feedback system subjected to time‐varying output/stated constraints. By introducing a one‐to‐one nonlinear mapping, the obstacle caused by full stated constraints is conquered. The adaptive control law is constructed by command filtered backstepping technology and radial basis function NNs, where only one learning parameter needs to be updated online. The stability analysis via nonlinear small‐gain theorem shows that all the signals in closed‐loop system are semiglobal uniformly ultimately bounded. The simulation examples demonstrate the effectiveness of the proposed control scheme.     

Robust nonlinear adaptive backstepping excitation controller design for rejecting external disturbances in multimachine power systems

This paper proposes a new approach to design a robust adaptive backstepping excitation controller for multimachine power systems in order to reject external disturbances. The parameters which significantly affect the stability of power systems (also called stability sensitive parameters) are considered as unknown and the external disturbances are incorporated into the power system model. The proposed excitation controller is designed in such a way that it is adaptive to the unknown parameters and robust to external disturbances. The stability sensitive parameters are estimated through the adaptation laws and the convergences of these adaptation laws are obtained through the negative semi-definiteness of control Lyapunov functions (CLFs). The proposed controller not only provides robustness property against external disturbances but also overcomes the over-parameterization problem of stability sensitive parameters which usually appears in some conventional adaptive methods. Finally, the performance of the proposed controller is tested on a two-area four machine 11-bus power system by considering external disturbances under different scenarios and is compared to that of an existing nonlinear adaptive backstepping controller. Simulation results illustrate the robustness of the proposed controller over an existing one in terms of rejecting external disturbances.     

Robust backstepping controller for grid‐side converter of DFIG‐based wind energy conversion systems

A robust backstepping controller with nonlinear damping is designed for the grid‐side converter (GSC) of a grid‐connected doubly fed induction generator (DFIG) in wind energy conversion systems (WECSs). The designed controller achieves the exponential ultimate boundedness of both the DC‐link voltage and GSC current errors with an arbitrarily fast decay rate and an arbitrarily small bound in the presence of both model uncertainties and time‐varying external disturbances. A desirable feature that distinguishes the proposed controller from other existing controllers is that the control input of GSC is constructed only by the static feedback of the measurable states. As a result, the control input becomes smooth and easy to implement without requiring differentiation or switching operations. The exponential boundedness and performance of the designed controller are demonstrated by simulation using a 1.5‐MW DFIG‐based WECS model built in MATLAB/SimPowerSystems and compared with a standard proportional‐integral controller. © 2016 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.