梯度铝蜂窝夹芯板的力学行为

梯度分层铝合金蜂窝板是一种有效的吸能结构,本工作在梯度铝蜂窝结构的基础上根据梯度率的概念,通过改变蜂窝芯层的胞壁长度,设计了4种质量相同、梯度率不同的铝蜂窝夹芯结构。通过准静态压缩实验,并结合非线性有限元模拟准静态及冲击态下梯度铝蜂窝夹芯结构的变形情况及其力学性能,分析对比了相同质量下梯度铝蜂窝夹芯结构在准静态下的变形模式以及冲击载荷下分层均质蜂窝结构和不同梯度率的分层梯度蜂窝结构的动态响应和能量吸收特性。结果表明:在准静态压缩过程中,铝蜂窝梯度夹芯板的变形具有明显的局部化特征,蜂窝芯的变形为低密度优先变形直至密实,层级之间的密实化应变差随芯层密度的增大而逐渐减小;在高速冲击下,梯度蜂窝板并非严格按照准静态过程中逐级变形直至密实,而是在锤头冲击惯性及芯层密度的相互作用下整体发生的线弹性变形、弹性屈曲、塑性坍塌及密实化;另外,在本工作所设计的梯度率中,当梯度率为γ₁=0.0276时,梯度蜂窝夹芯板的吸能性达到最好,相较于同等质量下的均质蜂窝夹芯板,能量吸收提高了10.63%。     

Fabrication of alumina ceramics with functional gradient structures by digital light processing 3D printing technology

Alumina ceramics with different unit numbers and gradient modes were prepared by digital light processing (DLP) 3D printing technology. The side length of each functional gradient structure was 10 mm, the porosity ratio was controlled to 70%, and the number of units were (1 × 1 × 1 unit) and (2 × 2 × 2 unit) respectively. The different gradient modes were named FCC, GFCC-1, GFCC-2 and GFCC-3. SEM, XRD, and other characterization methods proved that these gradient structures of alumina ceramics had only α-Al2O3 phase and good surface morphology. The mechanical properties and energy absorption properties of alumina ceramics with different functional gradient structures were studied by compression test. The results show that the gradient structure with 1 × 1 × 1 unit has better mechanical properties and energy absorption properties when the number of units is different. When the number of units is the same, GFCC-2 and GFCC-3 gradient structures have better compressive performance and energy absorption potential than FCC structures. The GFCC-2 gradient structure with 1 × 1 × 1 unit has a maximum compressive strength of 19.62 MPa and a maximum energy absorption value of 2.72 × 105 J/m3. The good performance of such functional gradient structures can provide new ideas for the design of lightweight and compressive energy absorption structures in the future.     

A cell-based smoothed radial point interpolation method with virtual nodes for three-dimensional mid-frequency acoustic problems

It is well known that the finite element method (FEM) encounters dispersion errors in coping with mid-frequency acoustic problems due to its “overly stiff” nature. By introducing the generalized gradient smoothing technique and the idea of condensed shape functions with virtual nodes, a cell-based smoothed radial point interpolation method is proposed to solve the Helmholtz equation for the purpose of reducing dispersion errors. With the properly selected virtual nodes, the proposed method can provide a close-to-exact stiffness of continuum, leading to a conspicuous decrease in dispersion errors and a significant improvement in accuracy. Numerical examples are examined using the present method by comparing with both the traditional FEM using four-node tetrahedral elements (FEM-T4) and the FEM model using eight-node hexahedral elements with modified integration rules (MIR-H8). The present cell-based smoothed radial point interpolation method has been demonstrated to possess a number of superiorities, including the automatically generated tetrahedral background mesh, high computational efficiency, and insensitivity to mesh distortion, which make the method a good potential for practical analysis of acoustic problems.     

Continuum model of two-dimensional crystal lattice of metamaterials

The continuum models of two-dimensional crystal lattice of metamaterial are investigated in this paper. The equivalent classical continuum requires the introduction of frequency-dependent mass density that becomes negative or infinite near the resonance frequency. In order to avoid the frequency-dependent mass density and make the dispersive characteristic of the elastic waves propagating in the equivalent continuum approximating that of lattice wave in two-dimensional crystal lattice of metamaterial, three kinds of continuum models, namely, the multiple displacements continuum model, the strain gradient continuum model and the nonlocal strain gradient continuum model, are investigated. It is found that the nonlocal gradient continuum model may better represent the dispersive relation and the bandgap characteristics of the metamaterial by the appropriate selection of nonlocal parameters.     

一种基于小字典不对等语料的跨语言词嵌入方法

双语词嵌入通常采用从源语言空间到目标语言空间映射,通过源语言映射嵌入到目标语言空间的最小距离线性变换实现跨语言词嵌入。然而大型的平行语料难以获得,词嵌入的准确率难以提高。针对语料数量不对等、双语语料稀缺情况下的跨语言词嵌入问题,该文提出一种基于小字典不对等语料的跨语言词嵌入方法,首先对单语词向量进行归一化,对小字典词对正交最优线性变换求得梯度下降初始值,然后通过对大型源语言(英语)语料进行聚类,借助小字典找到与每一聚类簇相对应的源语言词,取聚类得到的每一簇词向量均值和源语言与目标语言对应的词向量均值,建立新的双语词向量对应关系,将新建立的双语词向量扩展到小字典中,使得小字典得以泛化和扩展。最后,利用泛化扩展后的字典对跨语言词嵌入映射模型进行梯度下降求得最优值。在英语—意大利语、德语和芬兰语上进行了实验验证,实验结果证明该文方法可以在跨语言词嵌入中减少梯度下降迭代次数,减少训练时间,同时在跨语言词嵌入上表现出较好的正确率。     

负压差对固体进料系统压力分布和气固两相流动规律的影响

A series of experiments on a solid feed system was performed to investigate the effects of negative pressure gradient on the gas-solid flow pattern and hydrodynamic characteristics. Based on the non-fluidized gas-solid two phase flow and particulate mechanics in the standpipe, a method for predicting the pressure of the air passing through the recycle chamber and the pressure drop through the loop seal slit in these systems is also presented. The predicted pressure profile along the negative pressure gradient from the proposed model exhibits a good agreement with the experimental data. The experimental data show that the gas flow in the standpipe is always upward in the negative pressure gradients, while the direction of gas cannot be changed by the drag force. The solid flow rate, the materiel bed height in the recycle chamber (Hf), the pressure drop across the slit (△Pg） decrease with an increasing negative pressure gradient. At a given negative pressure gradient, the superficial gas velocity through the recycle chamber of the loop seal does not affect the pressure drop in standpipe. It increases with an increasing negative pressure gradient.     

厌氧接触+射流曝气+Fenton流化床技术处理制浆造纸废水运行实例

介绍厌氧接触+射流曝气+Fenton流化床技术处理制浆造纸生产废水的工程参数、运行效果和工程效益。六个月的运行数据显示,厌氧单元出水COD平均浓度为1321 mg·L^-1,平均去除率为61%;好氧单元出水COD浓度为185 mg·L^-1左右,平均去除率为78%;深度处理部分COD出水浓度为44 mg·L^-1,平均去除率为73%,可实现废水达标排放。     

Performance analysis and temperature gradient of solid oxide fuel cell stacks operated with bio-oil sorption-enhanced steam reforming

A high temperature gradient within a solid oxide fuel cell (SOFC) stack is considered a major challenge in SOFC operations. This study investigates the effects of the key parameters on SOFC system efficiency and temperature gradient within a SOFC stack. A 40-cell SOFC stack integrated with a bio-oil sorption-enhanced steam reformer is simulated using MATLAB and DETCHEM. When the air-to-fuel ratio and steam-to-fuel ratio increase, the stack average temperature and temperature gradient decrease. However, a decrease in the stack temperature steadily reduces the system efficiency owing to the tradeoff between the stack performance and thermal balance between heat recovered and consumed by the system. With an increase in the bio-oil flow rate, the system efficiency decreases because of the lower resident time for the electrochemical reaction. This is not, however, beneficial to the maximum temperature gradient. To minimize the temperature gradient of the SOFC stack, a decrease in the bio-oil flow rate is the most effective way. The maximum temperature gradient can be reduced to 14.6 K cm⁻¹ with the stack and system efficiency of 76.58 and 65.18%, respectively, when the SOFC system is operated at an air-to-fuel ratio of 8, steam-to-fuel ratio of 6, and bio-oil flow rate of 0.0041 mol s⁻¹.     

3D thermo-electro-chemo-mechanical coupled modeling of solid oxide fuel cell with double-sided cathodes

A solid oxide fuel cell based on double-sided cathodes is developed in our group, showing special properties and many advantages under some harsh conditions. To optimize the cell further, a thermo-electro-chemo-mechanical coupled 3D model is developed to simulate the distributions of temperature, current density, fuel gas and thermal stress under different voltages. The numerical results indicate that the temperature distribution, current, fuel gases and thermal stress is non-uniform in the cell at different voltages. The distribution of thermal stress in the electrolyte is also non-uniform because of the un-even electrochemical reaction and convective heat transfer. Furthermore, the result shows that about 47%~54% of maximum 1st principal stress in SOFC is caused by the mismatch of coefficients of thermal expansion (CTEs) among materials, while the other part of the maximum 1st principal stress is mainly caused by temperature gradient.     

汽车扭力梁侧倾工况性能设计

主要阐述侧倾工况下扭力梁3个重要性能指标及其设计方法,即侧倾角刚度、侧倾前束角变化梯度和侧倾外倾角变化梯度。介绍相关结构参数和性能指标,建立整车-系统-结构三级性能指标的分解关系,提出一种侧倾性能结构布置长方体设计理念,通过汇总统计扭力梁结构参数和性能指标总结其常用范围,为扭力梁的性能设计提供参考。