Q值正演模拟约束下的零偏移距VSP资料Q值估算

随着油气勘探目的层逐步走向深部,球面扩散、透射损失、环境噪声等使得VSP资料的初至子波发生改变,导致常规的Q值估算方法质量难以得到保证。为此,利用塔里木盆地托甫台地区TP327井零偏移距VSP资料,综合考虑透射损失和球面扩散的影响,提出一种Q值正演模拟约束下的零偏移距VSP资料Q值估算方法。该方法通过研究区的纵波速度、横波速度和密度建立层状地质模型,利用射线追踪的方法,用大地吸收介质模型的Q值正演模拟结果,对频谱比法和经验公式估算的初始Q值进行修正,使得Q值正演模拟结果与实际地震波的衰减记录在频谱特征上吻合,从而得到更为精确的Q模型。TP327井Q值估算结果表明,该方法与李庆忠经验公式得到的结果在浅层比较接近,但在中层和深层,两者差异较大;Q值正演模拟结果约束的子波与实际VSP资料子波的频谱比较吻合,证实用Q值正演模拟约束得到的层间Q值更为可靠。利用Q值正演模拟约束方法得到的Q模型对研究区地震资料进行反Q滤波能显著提高地震资料分辨率,有助于提高碳酸盐岩地层中缝洞的识别精度。     

Real‐time thermal states monitoring of absorber tube for parabolic trough solar collector with non‐uniform solar flux

With the world energy shortage problem becoming increasingly prominent, more and more attentions have been paid to the development of renewable energies. Among these sources, solar energy has received extensive attention with its excellent characteristics. The thermal state affects the safety of the solar heat collection system. In this paper, real‐time monitoring of the input heat flux on the inside wall and the temperature field simultaneously of an absorber tube for parabolic trough solar collector were studied. Based on the measured temperatures on the outside wall, the fuzzy adaptive Kalman filter coupled with weighted recursive least squares algorithm (WRLSA) was employed to monitor the heat states of the absorber tube inversely, in which WRLSA was used to acquire the heat flux while fuzzy adaptive Kalman filter was adopted to monitor the temperature field. The method showed strong robustness to resist the ill‐posedness. Accurate monitoring results also can be acquired when there are random disturbances of the heat transfer condition on the inner wall.     

Propagation and termination of an internal crack in continuously cast austenitic stainless steel analyzed by ∑ values and the Schmid factor

The formation mechanism of an internal crack was clarified from the viewpoint of the crystallography and thermal expansion. An inverse pole figure map obtained by EBSD pattern showed that the crack propagated along the grain boundaries having high ∑ values within the columnar zone. After the crack initiation, these positions were considered to undergo cracking followed by propagation toward the equiaxed side. Near the termination position, the grains ahead of crack propagation had a Schmid factor higher than 0.45 consuming elastic strain energy. Thermal expansion measurements showed that the grain with (0 0 1) orientation had the largest expansion while that with (0 1 1) the smallest. The grain boundaries neighboring the combination of (0 0 1) and (0 1 1) grains had the largest thermal stress. Therefore, thermal stress contributed to the initiation of cracking. It was thus proposed to enlarge the equiaxed zone to prevent cracking by discontinuing the crack propagation.     

应用网格走时的射线路径计算方法

子射线法（Raylet method）基于走时场的互易性，可用于多路径射线的计算。针对子射线法在拾取总走时（源点到给定点走时与接收点到给定点走时之和）场极值中存在的困难与稳定性问题，提出利用反插值求取总走时场中走时横向或纵向一阶导数为零的点来构成射线路径。此外，结合多级次计算策略，利用上述算法得到了全部的续至射线。在均匀介质和垂向梯度介质中，通过与解析结果的数值对比，发现计算网格尺度与导数算子长度对上述算法的精度有一定影响；在横向变速介质中，数值试验表明该算法相对于常规运动学射线追踪只有很小的计算偏差，其对横向变速具有很强的适应能力。低速体模型和Marmousi模型试算结果表明，本文算法对复杂模型具有令人满意的计算精度和计算效率。     

Inverse reinforcement learning-based time-dependent A* planner for human-aware robot navigation with local vision

In an environment where robots coexist with humans, mobile robots should be human-aware and comply with humans' behavioural norms so as to not disturb humans' personal space and activities. In this work, we propose an inverse reinforcement learning-based time-dependent A* planner for human-aware robot navigation with local vision. In this method, the planning process of time-dependent A* is regarded as a Markov decision process and the cost function of the time-dependent A* is learned using the inverse reinforcement learning via capturing humans' demonstration trajectories. With this method, a robot can plan a path that complies with humans' behaviour patterns and the robot's kinematics. When constructing feature vectors of the cost function, considering the local vision characteristics, we propose a visual coverage feature for enabling robots to learn from how humans move in a limited visual field. The effectiveness of the proposed method has been validated by experiments in real-world scenarios: using this approach robots can effectively mimic human motion patterns when avoiding pedestrians; furthermore, in a limited visual field, robots can learn to choose a path that enables them to have the larger visual coverage which shows a better navigation performance.     

A new linearly constrained minimum variance beamformer for reconstructing EEG sparse sources

Brain source imaging based on EEG aims to reconstruct the neural activities producing the scalp potentials. This includes solving the forward and inverse problems. The aim of the inverse problem is to estimate the activity of the brain sources based on the measured data and leadfield matrix computed in the forward step. Spatial filtering, also known as beamforming, is an inverse method that reconstructs the time course of the source at a particular location by weighting and linearly combining the sensor data. In this paper, we considered a temporal assumption related to the time course of the source, namely sparsity, in the Linearly Constrained Minimum Variance (LCMV) beamformer. This assumption sounds reasonable since not all brain sources are active all the time such as epileptic spikes and also some experimental protocols such as electrical stimulations of a peripheral nerve can be sparse in time. Developing the sparse beamformer is done by incorporating L1-norm regularization of the beamformer output in the relevant cost function while obtaining the filter weights. We called this new beamformer SParse LCMV (SP-LCMV). We compared the performance of the SP-LCMV with that of LCMV for both superficial and deep sources with different amplitudes using synthetic EEG signals. Also, we compared them in localization and reconstruction of sources underlying electric median nerve stimulation. Results show that the proposed sparse beamformer can enhance reconstruction of sparse sources especially in the case of sources with high amplitude spikes.     

发酵乳杆菌HCS08-005耐逆性及对体外细胞免疫调节作用的研究

目的 研究发酵乳杆菌(Lactobacillus fermentum) HCS08-005耐逆性及对体外细胞的免疫调节作用。方法 考察发酵乳杆菌HCS08-005的耐酸耐胆盐能力，并应用发酵乳杆菌HCS08-005细胞裂解物，处理小鼠单核巨噬细胞RAW264.7和小鼠脾脏细胞，用酶联免疫吸附测定试剂盒检测各类炎症因子包括肿瘤坏死因子-α (tumor necrosis factor-α，TNF-α)、白细胞介素-2 (inter-leukin-2，IL-2)、白细胞介素-12 (inter-leukin-12，IL-12)、γ干扰素(interferon-γ，IFN-γ)的表达水平。结果 显示发酵乳杆菌HCS08-005有较好的耐逆性，能够耐受酸和胆盐环境到达肠道发挥作用。不同浓度的发酵乳杆菌HCS08-005细胞裂解物对小鼠脾脏细胞和巨噬细胞分泌炎症因子均有极显著影响(P<0.01)，在质量浓度为100 μg/g时，IL-2分泌量为421.49 pg/g，TNF-α分泌量为161.23 pg/g，IFN-γ分泌量为846.14 pg/g，IL-12分泌量为12.88 pg/g，因子水平极显著提高(P<0.01)。结论 在体外细胞试验中，发酵乳杆菌HCS08-005有较好的耐逆性，对体外细胞有免疫调节作用。     

Engineering the Structure of Mesoporous Bioactive Glass Microspheres by the Surface Effect of Inverse Opal Templates and Temperature

The interactions of ions and molecules with material surface are highly dependent on the surface properties of the material. Therefore, the distribution of ions or molecules near the material surface may be affected by the surface properties. This phenomenon can be significant enough for controlling the structure of a material synthesized in the sub‐micrometer scale confinement space of a template. This work confirms that inverse opals are perfect templates for offering confinement space, while their different surface properties can strongly affect ion and block copolymer distribution in the confinement space. This surface effect principle can be used for the controlled synthesis of colloids with complex composition. As an example, four kinds of mesoporous magnetic bioactive glass colloids with ordered mesopores, core–shell structure, open surface pores, or disordered mesopores are prepared by using polystyrene and carbon inverse opal templates. This work reveals that inverse opal templates possess great advantage in controlled synthesizing colloidal structures due to their surface effect on ions and molecules and confinement space.