天然气水合物储层泥质细粉砂挡砂介质堵塞规律与微观挡砂机制

中国南海海域部分天然气水合物储层中地层砂为高泥质含量细粉砂，开采防控砂难度较大。针对高泥质细粉砂挡砂机制问题，使用粒度中值为10.13 μm的泥质细粉砂样品，模拟单向气液携砂流动条件，使用绕丝筛板、金属烧结网、金属纤维、预充填陶粒4类挡砂介质在20~80 μm挡砂精度下进行挡砂模拟实验，采用显微成像系统观察挡砂介质内部及表面砂粒沉积与堵塞动态，分析介质流通性能和挡砂性能变化，总结堵塞规律、微观挡砂机制与形态及其控制因素。研究结果表明，不同类型和精度的挡砂介质对泥质细粉砂的堵塞总体呈现堵塞开始、堵塞加剧和堵塞平衡3个阶段。随着驱替进行，挡砂介质渗透率逐渐降低，幅度会高达90%以上；同时过砂速度减缓，最终过砂率为5%~10%。根据堵塞规律和微观图像分析，提出了粗组分分选桥架、局部砂团适度挡砂、整体砂桥阻挡等挡砂介质对泥质细粉砂的3种微观挡砂机制。以粗组分分选桥架挡砂机制为主的挡砂工况下，挡砂介质堵塞渗透率较高，但过砂率超过15%，挡砂效果较差；以整体砂桥挡砂机制为主时，过砂率在10%以下，挡砂性能较好，但各类挡砂介质的堵塞渗透率不足1 D，流通性能较差。局部砂团适度挡砂机制为主时介质挡砂性能及流通性能介于两者之间。挡砂介质对天然气水合物储层泥质细粉砂的微观挡砂机制和形态受挡砂介质类型、精度、地层砂特征以及流动条件等因素控制，其规律对于水合物泥质细粉砂防控砂优化有指导意义。     

海上热采防砂封隔器研制与室内试验

海上稠油热采开发过程中,通常采用蒸汽吞吐的方式进行原油开采。为满足稠油热采长效密封要求,研制了HPHT-215型热采防砂封隔器。封隔器胶筒采用特制的氟硅基复合材料+玻璃纤维网结构,并开展了材料性能评价测试。通过有限元分析和室内胶筒组合测试,对胶筒材料和组合结构进行了评价优化。室内全尺寸整机测试表明:封隔器能够满足耐温350 ℃、耐压21 MPa密封性能要求,并开展了高低温多轮次密封性能评价测试。该型热采防砂封隔器的研制成功,为海上稠油蒸汽吞吐多轮次开发提供了保障,具有广泛的应用前景。     

Effect of fiber-reinforcement on the mechanical behavior of sand approaching the critical state

Several types of ground improvement methods that employ fiber-reinforcement have been developed in recent years. A series of consolidated drained triaxial compression tests has been conducted here to examine the effect of short fibers on the mechanical properties of Toyoura sand. Sand with 0%, 0.2%, 0.4%, and 1% fiber contents, prepared to yield random distribution, was sheared under several confining pressures and controlled via their initial relative densities. The test results showed that the maximum and residual deviatoric stresses increased, whereas the volumetric expansion decreased with an increase in fiber content. Although the stress ratio η (=q/p′) and specific volume changed depending on the fiber content and confining pressure with shear progression, they each reached the same values for a definite fiber content at the end of shearing, independent of initial relative density. In other words, the unique critical state line can be found for a definite fiber content. Moreover, the greater the fiber content, the larger the slope of the critical state line at the end of shearing. Additionally, as the length of fibers shortened with the same percentage of fiber inclusions in sand, the deviatoric stress and the stress ratio decreased, approaching the shear-strain-volumetric response of unreinforced sand.     

KCl/NaCl/CPI复合盐阳离子聚合物钻井液在南海大斜度井段中的应用

为改善南海东部惠州25-8油田大斜度井因泥岩水化造浆而引起的井壁失稳和钻井液增稠影响携砂的问题,在现有成熟PLUS/KCl钻井液的基础上开展复合盐阳离子聚合物钻井液研究,对钻井液配方进行了优化,评价了优化后钻井液的流变性、抑制性、封堵性和润滑性,并在惠州油田进行了现场应用。结果表明,复合盐阳离子聚合物钻井液配方中,无机盐类抑制剂KCl和NaCl的适宜加量为3%和12%、有机阳离子聚合物抑制剂PF-CPI适宜的加量为2.0%。该钻井液抑制性强,防膨率高达93.32%,钻屑回收率87.56%;受到钻屑侵污后的钻井液流变性能波动小,仍具有较低的黏度和合适的切力,有利于大斜度井携砂;封堵性和润滑性均优于PLUS/KCl钻井液体系。现场应用2口井,钻井液流变性良好,平均起下钻速度提高,钻井过程顺利,无复杂情况发生。复合盐阳离子聚合物钻井液可改善南海大斜度井起下钻阻卡的问题。     

Ceramics composites from iron ore tailings and blast furnace slag

The search for materials and methods capable of reducing human impacts on the environment is of utmost importance nowadays. This study's primary purpose was to analyze the technical feasibility of ceramic composites production utilizing Fundão Dam's Iron Ore Tailings (IOT), Blast Furnace Slag (BFS) from charcoal, and Foundry Sand (FS) as partial substitutes for the traditional raw materials – sand and clay – for application in building industry materials. The composites were molded in rectangular specimens and fired at temperatures of 900, 950, 1000, 1050, and 1200 °C. The developed materials were analyzed and characterized by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), Thermogravimetry (TGA), and Differential Thermal Analysis (DTA). The obtained materials had flexural strength modulus of up to 12.19 MPa, water absorption ranging from 2 to 22%, linear shrinkage ranging from 0.02 to 6.50%, and apparent density ranging from 2.03 to 1.63 g/cm³. The study of the internal structure formation process revealed the formation of amorphous structures in the composites. The results demonstrated that these waste materials may be jointly used in construction materials, contributing to the reduction of natural resource extraction, besides enabling their correct disposal, minimizing environmental impacts, and improving the life quality of the surrounding communities.     

致密砂岩气藏水平井测井评价——以鄂尔多斯盆地大牛地气田X井区为例

致密气藏中有相当一部分水平井测井系列少、评价难度大，如何利用有限的测井资料有效开展水平井测井评价，对气藏高效开发具有重要意义。以鄂尔多斯盆地大牛地气田X井区为例，结合地质和生产动态等资料，利用水平井仅有的随钻伽马测井和气测录井资料开展测井评价研究，形成了基于伽马峰值和全烃有效指示因子的双参数水平井产能评价方法，有效提高了水平井产能评价精度，为同类气藏水平井测井评价提供了借鉴。研究认为，基于随钻伽马峰值分析能够有效对储层进行评价，大牛地X井区山西组和下石盒子组高产井目的层段随钻伽马值的分布均表现出了明显的单峰特征，而低产井则表现为双峰或不具有明显的峰值特征，主要与水平井钻遇砂体的稳定性有关。利用X井区气测录井资料，构建了基于全烃有效指示因子用于评价单井产能，并建立了山西组和下石盒子组水平井经济产能的气测录井指标。综合上述两种方法，形成双参数水平井产能评价方法，准确评价了X井区水平井单井产能。     

海月构造带东三段滩坝砂分布及成藏主控因素分析

辽河滩海地区海月构造带东三段沉积期,三角洲前缘砂体受湖岸流和波浪的改造,形成了一系列滩坝砂沉积,细分为滩砂和坝砂,水动力强则形成坝砂,水动力弱则形成滩砂;滩坝砂平行于湖岸线呈带状分布,易于形成岩性圈闭。滩坝砂受砂体发育规模、储层物性、断裂输导体系及封堵性等多种因素控制,在滩坝砂较为发育的东三下段,靠近海南断层、盖州滩断层且封堵条件优越的滩坝砂最易于成藏。     

“四步法”在岩性油藏砂体连通性研究中应用

岩性油藏砂体规模小、非均质性强、油水分布复杂等特点造成了砂体间的连通关系复杂,砂体展布特征不明显。在"旋回对比、分级控制、不同相带区别对待"的单油层对比方法确定井间砂体连通关系,研究"对、拆、统、验"四步法,提高了高邮凹陷黄珏油田戴南组砂体连通性研究的准确度,为岩性油藏的油田注采层系调整、流线场调整等措施提供地质依据。     

双南构造SQ3水进域湖底扇砂体识别及含油气性分析

双南构造SQ3水进期湖相泥岩沉积中发育一套砂质储层,含油丰度较高,但井间产能差异较大,岩心见不完整的鲍玛序列,综合测井相、地震相分析确定为湖底扇沉积砂体。在五级层序格架控制下,结合湖底扇地震反射特征选取敏感振幅属性及零交叉点属性定性刻画砂体的分布边界;运用测井约束储层反演技术,定量刻画砂体的分布范围。结果表明,湖底扇砂体分为两期,其中湖底扇供给水道及中扇辫状沟道砂体次生孔隙发育且连通性好,为中孔中渗储层,含油气丰度及单井产能均优于其他相带,为本区的优势储层。结合双南构造的区域构造特点,将其划分3类有利目标区。     

提高加盖钢包自开率的研究与实践

首钢京唐300t钢包加盖后自开率明显下降，分析了加盖钢包自开率下降的机理，确定了主要原因是包衬温度升高后造成的液态渣回流。通过对引流砂的流动性、密度和渗钢性研究，设计了一种适用于加盖钢包的引流砂成分配比，并通过控制Al2O3和MgO含量，保证铬矿砂纯度。改进了钢包热修工艺，设计了针对加盖钢包的投砂操作和防钢渣回流措施。研究结果经推广使用后，钢包月不自开炉数由8～9炉降低至2炉以内，综合自开率达99.9%，双精炼工艺自开率达100%。