天然气水合物储层泥质细粉砂挡砂介质堵塞规律与微观挡砂机制

中国南海海域部分天然气水合物储层中地层砂为高泥质含量细粉砂，开采防控砂难度较大。针对高泥质细粉砂挡砂机制问题，使用粒度中值为10.13 μm的泥质细粉砂样品，模拟单向气液携砂流动条件，使用绕丝筛板、金属烧结网、金属纤维、预充填陶粒4类挡砂介质在20~80 μm挡砂精度下进行挡砂模拟实验，采用显微成像系统观察挡砂介质内部及表面砂粒沉积与堵塞动态，分析介质流通性能和挡砂性能变化，总结堵塞规律、微观挡砂机制与形态及其控制因素。研究结果表明，不同类型和精度的挡砂介质对泥质细粉砂的堵塞总体呈现堵塞开始、堵塞加剧和堵塞平衡3个阶段。随着驱替进行，挡砂介质渗透率逐渐降低，幅度会高达90%以上；同时过砂速度减缓，最终过砂率为5%~10%。根据堵塞规律和微观图像分析，提出了粗组分分选桥架、局部砂团适度挡砂、整体砂桥阻挡等挡砂介质对泥质细粉砂的3种微观挡砂机制。以粗组分分选桥架挡砂机制为主的挡砂工况下，挡砂介质堵塞渗透率较高，但过砂率超过15%，挡砂效果较差；以整体砂桥挡砂机制为主时，过砂率在10%以下，挡砂性能较好，但各类挡砂介质的堵塞渗透率不足1 D，流通性能较差。局部砂团适度挡砂机制为主时介质挡砂性能及流通性能介于两者之间。挡砂介质对天然气水合物储层泥质细粉砂的微观挡砂机制和形态受挡砂介质类型、精度、地层砂特征以及流动条件等因素控制，其规律对于水合物泥质细粉砂防控砂优化有指导意义。     

Comparison of Bougainvillea spectabilis and Bougainvillea glabra species inhibited in Pakistan based on microscopic studies: Light microscope and scanning electron microscope

The anatomical variations of two plants from the Nyctaginaceae family, Bougainvillea spectabilis and Bougainvillea glabra, were studied using light and scanning electron microscopy methods in this work. Bougainvillea is a dicotyledonous with defensive traits that can withstand extreme (hot and dry) settings; according to the findings, crystal inclusions in cells, woody spines, and an abnormal development pattern are all features that help them survive against predators and are unique to this species. The Bougainvillea plant's leaves are arranged in simple pattern, alternate to each other along stem having an undulate leaves edge and an oval form. The xylem and phloem, palisade, parenchyma midrib, spongy mesophyll, raphide crystal bundles, and trichomes were all visible when bracts and leaves were transversally sectioned and dyed with toluidine blue O (TBO). The presence of crystals was confirmed by a detailed examination of the transverse leaves by using bright-field and cross-polarizing microscopy. Dissecting microscopic examination showed that all the leaves revealed leaves venation pattern that had midvein, lateral veins areoles, and trichomes. Although trichomes have been identified on both sides, a closer look at a cleaned leaf dyed with TBO showed multicellular abundant trichomes on adaxial surface. Stomata complexes were typically found on the abaxial surface of the leaf according to epidermal peels. Present studies also showed that on adaxial side, stomata were lesser in number or were absent and also showed that the morphologies of the pavement cells on the adaxial and abaxial sides of the leaf differed.     

Dilated and soft attention-guided convolutional neural network for breast cancer histology images classification

Breast cancer is one of the most common types of cancer in women, and histopathological imaging is considered the gold standard for its diagnosis. However, the great complexity of histopathological images and the considerable workload make this work extremely time-consuming, and the results may be affected by the subjectivity of the pathologist. Therefore, the development of an accurate, automated method for analysis of histopathological images is critical to this field. In this article, we propose a deep learning method guided by the attention mechanism for fast and effective classification of haematoxylin and eosin-stained breast biopsy images. First, this method takes advantage of DenseNet and uses the feature map's information. Second, we introduce dilated convolution to produce a larger receptive field. Finally, spatial attention and channel attention are used to guide the extraction of the most useful visual features. With the use of fivefold cross-validation, the best model obtained an accuracy of 96.47% on the BACH2018 dataset. We also evaluated our method on other datasets, and the experimental results demonstrated that our model has reliable performance. This study indicates that our histopathological image classifier with a soft attention-guided deep learning model for breast cancer shows significantly better results than the latest methods. It has great potential as an effective tool for automatic evaluation of digital histopathological microscopic images for computer-aided diagnosis.     

掺合料对超高性能水泥基装饰材料性能的影响

将重钙粉与偏高岭土以不同的比例混合并替代白水泥，制备超高性能水泥基装饰材料,研究两者掺入比例变化对超高性能水泥基装饰材料工作性能、力学性能及自收缩的影响，采用SEM扫描电镜观察28 d龄期后试件内部微观形貌，研究表明，随着重钙粉与偏高岭土比例的增大，试件的致密程度和强度先增后减，其中B9-9的28 d抗压与抗折强度可以达到120.6 MPa与42.9 MPa，且工作性、收缩性能良好、内部结构致密。     

Modeling and surface texturing on surface roughness in machining LaPO4–Y2O3 composite

In this work, lanthanum phosphate with a 20% yttria (LaPO₄/Y₂O₃) composite prepared by an Aqueous Sol–Gel process is machined using an Abrasive Water Jet Machine (AWJM). The machinability of this composite is studied by varying the input parameters namely Jet Pressure (JP), Stand-Off Distance (SOD), and Traverse Speed (TS) on Surface finish. Garnet of 80 mesh size is used as an abrasive with a flow rate of 85?g/min. The microstructural characterization study reveals the presence of new element YPO₄. This element enhances the machinability and reduced porosity in the composite. Microscopy examinations on the machined surface reveals that partial overlapping at low JP, poor surface finish at high JP and SOD, forged deficiency at maximum SOD and TS. The minimum levels of all input parameters are influenced to obtain acceptable Ra. Atomic Force Microscopy (AFM) on the kerf surface shows micro wear track and peaks. The Multiple Regression Analysis (MRA) is developed for Ra to check the adequacy. From the Analysis of Variance (ANOVA), SOD has a significant effect on Ra with a contribution of 53%. The influence of JP and TS on Ra is found to be 31% and 15%, respectively.     

镜面杂质与水汽吸放对露点仪影响的实验研究

显微成像露点仪在研制和测试过程中发现镜面杂质和内腔材质吸放水汽等影响测量精度的问题。针对镜面杂质对显微成像露点仪测量的影响开展了镜面图像特征的实验研究，结果表明：镜面杂质点处露珠凝结具有优先性，且反复凝结消散后镜面出现杂质沉降现象。针对水汽吸放对显微成像露点仪的影响开展了水汽释放与吸附效应的实验研究，结果表明：当温度发生变化时，显微成像露点仪感应舱内壁氧化铝材质存在释放（或吸附）水汽现象，使得显微成像露点仪测量值偏大（或偏小）。研究结果为露点仪在功能设置及镜面与腔体材料选择方面提供了参考。     

Microscopic mechanism of perfluorocarbon gas formation in aluminum electrolysis process

In view of the unclear cause of perfluorocarbons (PFCs) emission in the anode effect stage of aluminum electrolysis, the microscopic formation mechanism of PFCs was studied by density functional theory calculation and X-ray photoelectron spectroscopy (XPS). It is found that the discharge of fluorine containing anions ([F]^?) on carbon anode first causes the substitution of C—H by C—F and further results in the saturation of aromatic C—C bonds, leading to the appearance of —CF₃ or —C₂F₅ group through six-carbon-ring opening. Elimination of —CF₃ and —C₂F₅ with F atom could be a likely mechanism of CF₄ and C₂F₆ formation. XPS results confirm that different types of —CF_x group can be formed on anode surface during electrolysis, and the possibility that [F]^? discharges continuously at the C edge and finally forms different C—F bonds in quantum mechanical calculation was verified.     

Light microscopy of Pakistani Berberis leaf cuticles and its taxonomic implications

Taxonomy of the genus Berberis is quite complex, due to overlapping morphological characters, making it very difficult to differentiate the species within the genus. In order to resolve this taxonomic complexity, the foliar anatomy of 10 Berberis L. species was carried out, for the first time from Pakistan, using light microscopy (LM). Significant variation in terms of epidermal cells shape, size, cell wall pattern, and stomata type was observed. B. baluchistanica has the largest epidermal cells, Adaxial: length = 45–(53.9 ± 3.6)–62.5 μm; and width = 22.5–(26.3 ± 1.3)–30 μm; Abaxial: length = 37.5–(43.25 ± 2.5)–50 μm; and width = 20–(22.6 ± 0.8)–25. The highest number of stomata was observed in B. glaucocarpa as 62 on the abaxial surface while the lowest number of stomata was recorded in B. baluchistanica as 8 on the adaxial surface. Of 10 investigated species, 6 possess anomocytic type stomata, while 2 species that is, B. aitchisonii and B. parkeriana have both anomocytic and anisocytic stomata while B. baluchistanica and B. calliobotrys have only paracytic type stomata. The highest number of cells per unit area was present on the adaxial surface of B. calliobotrys ranging from 245–(252.4)–260 followed by B. parkeriana with 209–(227.8)–250 on the abaxial surface. Stomatal index (SI) also varied considerably and was the lowest (2.6) percentage in B. baluchistanica and highest (31.9) percentage in B. kunawurensis. A taxonomic key based on micro‐morphological characters is provided for species identification.     

Micro‐morphological,environmental and phytochemical investigation of herbal medicines by using LM and SEM: A quality control tool

The use of quality control tool for authentication of Jadwar (Delphinium denudatum Wall. ex Hook.f. & Thomson), a folk herbal drug used for the treatment of different ailments, was studied. People face problems of adulteration for this drug at global, regional, national and local levels. Two different plant species are commercially marketed in the Indo‐Pak Subcontinent under the same trade name of Jadwar. One is D. denudatum Wall. ex Hook.f. & Thomson and the other is Aconitum heterophyllum Wall. ex Royle. To focus on this problem, a marketable available drug sample of Jadwar was authenticated by using basic microscopy tools (LM) and advanced chemo‐taxonomic markers. Authentication, quality and standardization of this drug was achieved using morphology, organoleptography, UV and IR analyses, scanning electron microscopy of pollen and anatomical investigations. The techniques used for authentication marked the clear difference between the studied plants. Microscopic studies, chemotaxonomic investigation and other techniques used in this project provided the basis for the authentication of this species.     

DZD型高效双相分散冲洗液的室内研究

改善钻井液-冲洗液-水泥浆这三液两界面的相容性,减少彼此絮凝和结构的破坏,可以有效提高注水泥顶替效率和界面胶结强度,保证较好的固井质量。通过大量的室内研究,优选出一种高效双相分散剂,确定冲洗液配方。性能评价结果表明,该冲洗液具有良好的流变性,与低固相钻井液和水泥浆均具有良好的相容分散性;对低固相泥浆冲洗效率达到了90%以上,界面胶结强度平均提高50%以上。此外,通过电镜、原子力显微镜等现代分析手段,对胶结强度提高原因进行了微观分析。