变压吸附制氮(PSA)设备在炼油生产中的应用

针对某炼油装置氮气供需矛盾突出的问题,提出采用变压吸附(PSA)制氮设备,利用空压站净化风生产氮气方案,(1)降低空压站多余风量放空,减少浪费;(2)正常生产情况下,利用PSA设备生产氮气,对供氮管网压力调节。针对上述方案,结合空压站供风现状进行分析,得出结论:利用PSA制氮设备满足炼油装置高峰用氮是可行的,并提出了具体措施和运行过程中应注意的问题。     

Locating wind farm for power and hydrogen production based on Geographic information system and multi-criteria decision making method: An application

Hydrogen generation from renewable energy resources is considered as a suitable solution to solve the problems related to the energy sector and the reduction of greenhouse gases. The aim of this study is to provide an integrated framework for identifying suitable areas for the construction of wind farms to produce hydrogen. For this purpose, a combined method of Geographic Information System (GIS) and multi-criteria decision making (MCDM) has been used to locate the power plant in Yazd province. The GIS method in the present study consisted of two parts: constraints and criteria. The constraint section included areas that were unsuitable for the construction of wind farms to produce power and hydrogen. In the present study, various aspects such as physical, economic and environmental had been considered as constraints. In the criteria section, eight different criteria from technical aspects (including average wind speed, hydrogen production potential, land slope) and economic aspects (including distance to electricity grid, distance to urban areas, distance to road, distance to railway and distance to centers of High hydrogen consumption) had been investigated. The MCDM tool had been used to weigh the criteria and identify suitable areas. Analytic Hierarchy Process (AHP) technique was used for weighting the criteria. The results of AHP weighting method showed that economic criteria had the highest importance with a value of 0.681. The most significant sub-criterion was the distance to urban areas and the least significant sub-criterion was the distance to power transmission lines. The results of GIS-MCDM analysis had shown that the most proper areas were in the southern and central sectors of Yazd province. In addition, the feasibility of hydrogen production from wind energy had shown that this province had the capacity to generate hydrogen at the rate of 53.6–128.6 tons per year.     

冰下单载波水声通信试验研究

北极地区战略地位的提高促进了极区各种应用的快速发展，冰下水声通信成为其中一个热点问题。为了研究冰下单载波水声通信性能，在黄海冰区开展冰下试验。重点分析了内嵌锁相环的多通道判决反馈均衡(Multi-channelDecision Feedback Equalization, M-DFE)技术在冰下水声通信中抗多途时延的能力，研究比较了改进比例归一化最小均方(Improved Proportional normalized Least Mean Square, IPNLMS)算法和递归最小二乘(Recursive Least Squares,RLS)算法的均衡性能。试验结果表明IPNLMS和RLS都能克服信道多途效应带来的影响。在牺牲计算复杂度的前提下，RLS具有更好的均衡效果，M-DFE在冰下环境中能够有效消除码间干扰。     

Review and analysis of the hydrogen production technologies from a safety perspective

Hydrogen can be produced via many different technologies; however, from a safety standpoint there exists no framework for selecting the right technology. Here, we provide a structured framework for assessment of the most desirable hydrogen production technology based on efficiency, safety, and infrastructure, by using a Multi-Criteria Decision-Making (MCDM) integrated Analytic Hierarchy Process (AHP) and life-cycle index (LInX) approach. We apply this modified MCDM approach to steam methane reforming (SMR), autothermal reforming, partial oxidation, alkaline electrolysis, polymer electrode membrane electrolysis, and solid oxide electrolyzer cell processes. Our results show that SMR is the most desirable technology based on the efficiency, safety, and infrastructure criteria. We employ fuzzy set theory to address subjectivity and uncertainty challenges in the data and found that although the technologies based on electrolysis have an environmental advantage, they exhibit higher uncertainties than non-renewable technologies such as SMR. Overall, this new framework addresses the challenge to find the most desirable and safer technology for hydrogen production.     

Effects of water and carbon dioxide pressure on the adhesion of Na2SiO3 and K2SiO3 binders on silica sand surface: Comparison of experimental data and molecular dynamics simulation

In this study, the effects of different water amounts, CO₂ blowing pressures, Na₂O:SiO₂ and K₂O:SiO₂ ratios were studied on the bonding strength of Na₂SiO₃ and K₂SiO₃ binders. It was concluded that the increase in water content had an adverse effect on the bonding strength of CO₂-hardened Na₂SiO₃ sand. The blowing pressure did not have a linear relationship with the bonding strength, but it was closely related to the diffusion coefficient of CO₂. Based on scanning electron microscopic results, it was inferred that the low strength was caused by the formation of lamellar crystals after the adhesive was hardened. It was found that the low strength was caused by the formation of lamellar crystals after the adhesive was hardened. Based on molecular dynamics simulations, different pressures and water contents had a great influence on the diffusion coefficient of CO₂ in the silicate binder system. This research provides an important theoretical background to improve the technology of CO₂-hardened Na₂SiO₃- and K₂SiO₃-bonded sands during the casting process.     

Some q-rung orthopair uncertain linguistic aggregation operators and their application to multiple attribute group decision making

q-Rung orthopair fuzzy sets (q-ROFSs), originally presented by Yager, are a powerful fuzzy information representation model, which generalize the classical intuitionistic fuzzy sets and Pythagorean fuzzy sets and provide more freedom and choice for decision makers (DMs) by allowing the sum of the $q\mathrm{t}\mathrm{h}$ power of the membership and the $q\mathrm{t}\mathrm{h}$ power of the nonmembership to be less than or equal to 1. In this paper, a new class of fuzzy sets called q-rung orthopair uncertain linguistic sets (q-ROULSs) based on the q-ROFSs and uncertain linguistic variables (ULVs) is proposed, and this can describe the qualitative assessment of DMs and provide them more freedom in reflecting their belief about allowable membership grades. On the basis of the proposed operational rules and comparison method of q-ROULSs, several q-rung orthopair uncertain linguistic aggregation operators are developed, including the q-rung orthopair uncertain linguistic weighted arithmetic average operator, the q-rung orthopair uncertain linguistic ordered weighted average operator, the q-rung orthopair uncertain linguistic hybrid weighted average operator, the q-rung orthopair uncertain linguistic weighted geometric average operator, the q-rung orthopair uncertain linguistic ordered weighted geometric operator, and the q-rung orthopair uncertain linguistic hybrid weighted geometric operator. Then, some desirable properties and special cases of these new operators are also investigated and studied, in particular, some existing intuitionistic fuzzy aggregation operators and Pythagorean fuzzy aggregation operators are proved to be special cases of these new operators. Furthermore, based on these proposed operators, we develop an approach to solve the multiple attribute group decision making problems, in which the evaluation information is expressed as q-rung orthopair ULVs. Finally, we provide several examples to illustrate the specific decision-making steps and explain the validity and feasibility of two methods by comparing with other methods.     

The generalized Dice similarity measures for Pythagorean fuzzy multiple attribute group decision making

The Pythagorean fuzzy set (PFS) is characterized by two functions expressing the degree of membership and the degree of nonmembership, which square sum of them is equal or less than 1. It was proposed as a generalization of a fuzzy set to deal with indeterminate and inconsistent information. In this study, we shall present some novel Dice similarity measures of PFSs and the generalized Dice similarity measures of PFSs and indicates that the Dice similarity measures and asymmetric measures (projection measures) are the special cases of the generalized Dice similarity measures in some parameter values. Then, we propose the generalized Dice similarity measures-based multiple attribute group decision-making models with Pythagorean fuzzy information. Then, we apply the generalized Dice similarity measures between PFSs to multiple attribute group decision making. Finally, an illustrative example is given to demonstrate the efficiency of the similarity measures for selecting the desirable ERP system.