高耸桥墩保护性爆破拆除关键技术

为解决高耸钢砼桥墩上部倾斜导致的工程质量不合格问题,采用保护性控制爆破将上部倾斜部分钢砼桥墩予以拆除,同时保留下部未偏斜部分桥墩不受破坏。采用开设组合形状切口,预开定向窗、导向窗;设置组合高差卸荷槽,预伤钢筋弱化抗压抗拉能力为关键措施的控制爆破方案。方案实施取得了十分满意的效果,上部拟拆除部分桥墩顺利倾倒下坠,下部保留部分桥墩完好无损。采用保护性控制爆破技术能高效、安全地解决类似高耸钢砼桥墩(构筑物)部分拆除、部分保留利用的问题,并能取得可观的经济、社会效益。     

箱形横梁的水压爆破拆除

某电影院大厅内钢筋混凝土箱形横梁长25m,断面尺寸1 6m×2 4m,用水压爆破拆除。通过梁的受力分析得知,为避免横梁的挠度过大,在吊梁拆除后必须另补支撑,以确保水压爆破正常进行。文中对水压爆破炸药用量的计算公式进行了比较和简评。在参考计算结果和考虑厅内环境的基础上,并结合以往水压爆破工程的经验,确定了合理、有效的药量,保证了主体结构的绝对安全。     

Effect of height on the corrosion of steel and galvanized steel in nontropical coastal marine environments

In this study, the behavior of carbon steel and galvanized steel in nontropical coastal marine environments was evaluated. Evaluation was carried out with specimens with dimensions of 10 cm × 10 cm × 0.3 cm. These specimens were exposed to four testing stations (Iquique, Mejillones, Los Vilos, and San Vicente), where racks were installed both at ground level (ground), as well as in the upper zone of electrical transmission towers (tower). In each station, 24 specimens of A36 carbon steel and galvanized steel were placed (12 each). The corrosivity of the environment was measured using the ISO 9223, 9225, and 9226 standards. The specimens were evaluated on-site, monthly, through visual inspection and photographic record. Once withdrawn, the corrosion rate was determined and the corrosion products were analyzed through Raman and Fourier-transform infrared. The results show that, in all cases, the corrosion rate is greater in the tower than on the ground. However, even though the Los Vilos station is located farther from the sea (3,500 vs. ≈500 m), the corrosion rate of steel in the tower is the highest. This is caused by the generation of HCl from the transformation of lepidocrocite into goethite, in the presence of low chloride content, which acidifies the steel/corrosion product interface. In the case of galvanized steel, the corrosion rate is a function of the chloride content in the atmosphere, obtaining an excellent correlation between both parameters.     

大采高综放工作面强动压端头顶板控制技术

为了解决大采高综放工作面回风侧端头顶板控制问题,针对马道头矿8211工作面的地质情况,通过对回风顺槽超前注浆加固,提高超前支护范围和支护强度,并对回风侧端头三角区煤壁和顶板进行化学浆加固的技术方案,有效控制了顺槽超前区围岩变形和工作面回风侧端头三角区煤壁片帮,保证了工作面端头区顶板安全。     

厚煤层一次采全高煤壁失稳原因及控制技术

针对成庄煤矿四盘区层一次采全高煤壁失稳问题,对观测统计数据进行分析,发现片帮主要表现形式分五种:顶部、腰部、顶底部、底部以及斜切片帮,据此采用对顶板超前预爆破和煤壁超前预加固技术来控制大采高煤壁稳定性,不仅对煤壁失稳的控制取得了良好的效果,而且经济效益显著。可为相似条件下的厚煤层一次采全高煤壁失稳控制提供借鉴。     

深部大采高工作面煤柱留设优化数值模拟研究

为缓解高产高效矿井采掘接续紧张局面，鄂尔多斯地区综采工作面多采用“两进一回”的巷道布置形式，辅运巷在回采结束后用作下一工作面的回风巷，两进风巷之间采用大煤柱护巷。但随着该地区采深600 m以上的深部矿井增多，冲击地压灾害问题逐渐显现，双巷大煤柱留设的弊端也暴露出来。针对此问题，以鄂尔多斯红庆河煤矿3^-1101大采高综采工作面为例，对不同宽度煤柱留设的应力分布规律进行建模研究，提出了合理的煤柱留设宽度，为鄂尔多斯地区类似条件矿井的安全高效开采提供参考依据。     

Investigation of the thermal behavior effect of the surrounding material environment on the swirling flame structure

This paper is focusing on the numerical simulation of a swirling flame, resulting from the interaction of multiple fires, evolving in a free and unlimited environment. A typical system, formed by a central fire source surrounded by four heat sources, is used. Since the thermal characteristic of the surrounding sources is the main engine for the rotation of flame, a detailed study is performed by varying the heating flux of these sources. This study shows that an increase of the heating flux of surrounding sources has as a result an intensification of the penetrating air puffs through the openings between the surrounding four heat sources. These puffs tangentially drive the central flame, thus producing a marked improvement on the angular momentum. Moreover, this study shows that the flame height is strongly affected by the flame rotation. Moreover, two different aspects of the flame height evolution are observed from the flow visualization and the thermal and dynamic fields for the different cases studied.     

林分平均高度卫星遥感新进展

林分平均高度是生态系统模型重要的输入参数之一,与生物量估算与碳循环研究高度相关。通过系统回顾林分平均高度研究的发展历史和最新进展,总结了不同传感器林分平均高度(SAR树高与LiDAR冠层高度)研究的主要模型和方法,通过单一传感器技术进行林分平均高度研究的内在特征的不同,分析了多传感器的区域林分平均高度联合反演方法的优劣性,并从科学发展趋势和社会需求出发,认识目前存在的主要问题与难点及未来面临的挑战和机遇,为今后更好地进行森林垂直结构和全球碳循环研究提供思路和借鉴。     

Performance validation of a hybrid ventilation strategy comprising longitudinal and point ventilation by a fire experiment using a model-scale tunnel

We examined the exhaust performance of a hybrid ventilation strategy for maintaining a safe evacuation environment for tunnel users in a tunnel fire. The hybrid ventilation strategy combines the longitudinal ventilation strategy with the point ventilation strategy which is a type of transverse ventilation strategy. The model tunnel developed by this study was scaled to 1/5 the size of a full-scale tunnel. The model-scale experiment was performed taking into consideration Froude's law of similarity. Measurement items were the distribution of temperature and concentration of smoke inside the tunnel, longitudinal wind velocity, mass flow of smoke in the point ventilation duct, and the heat release rate of the fire source. The following main conclusions were obtained. The smoke height was constant even when varying the extraction rate of smoke from the ceiling vent. The backlayering length and critical velocity of the smoke flow in the hybrid strategy could be predicted by the methodology developed by using the longitudinal strategy. The hybrid strategy maintained a safe evacuation environment on both sides of the tunnel fire.     

Current–voltage and capacitance–voltage characteristics of Al Schottky contacts to strained Si-on-insulator in the wide temperature range

The electrical characteristics of Al/strained Si-on-insulator (sSOI) Schottky diode have been investigated using current–voltage (I–V) and capacitance–voltage (C–V) measurements in the wide temperature range of 200–400 K in steps of 25 K. It was found that the barrier height (0.57–0.80 eV) calculated from the I–V characteristics increased and the ideality factor (1.97–1.28) decreased with increasing temperature. The barrier heights determined from the C–V measurements were higher than those extracted from the I–V measurements, associated with the formation of an inhomogeneous Schottky barrier at the interface. The series resistance estimated from the forward I–V characteristics using Cheung and Norde methods decreased with increasing temperature, implying its strong temperature dependence. The observed variation in barrier height and ideality factor could be attributed to the inhomogeneities in Schottky barrier, explained by assuming Gaussian distribution of barrier heights. The temperature-dependent I–V characteristics showed a double Gaussian distribution with mean barrier heights of 0.83 and 1.19 eV and standard deviations of 0.10 and 0.16 eV at 200–275 and 300–400 K, respectively. From the modified Richardson plot, the modified Richardson constant were calculated to be 21.8 and 29.4 A cm⁻² K⁻² at 200–275 and 300–400 K, respectively, which were comparable to the theoretical value for p-type sSOI (31.6 A cm⁻² K⁻²).