基于改进残差特征蒸馏的轻量级超分辨率网络

基于深度学习的图像超分辨率算法通常采用递归的方式或参数共享的策略来减少网络参数，这将增加网络的深度，使得运行网络花费大量的时间，从而很难将模型部署到现实生活中。为了解决上述问题，本文设计一种轻量级超分辨率网络，对中间特征的关联性及重要性进行学习，且在重建部分结合高分辨率图像的特征信息。首先，引入层间注意力模块，通过考虑层与层之间的相关性，自适应地分配重要层次特征的权重。其次，使用增强重建模块提取高分辨率图像中更精细的特征信息，以此得到更加清晰的重建图片。通过大量的对比实验表明，本文设计的网络与其他轻量级模型相比，有更小的网络参数量，并且在重建精度和视觉效果上都有一定的提升。     

Surfactant-free electrochemical synthesis of fluoridated hydroxyapatite nanorods for biomedical applications

Fluoridated hydroxyapatite (FHA) [Ca₁₀(PO₄)₆F_x(OH)_2−x, x = 0–2] is believed to be a promising calcium phosphate (CaP) to replace pure hydroxyapatite (HA) for next-generation implants, owing to its better biocompatibility, higher antibacterial activity, and lower solubility. Notably, the shape and size of the CaP crystals play key roles in their performance and can influence their applications. One-dimensional (1D) FHA nanorods are important CaP materials which have been widely used in regenerative medicine applications such as restorative dentistry. Unfortunately, the traditional synthesis methods for FHA nanorods either employ surfactants or take a relatively long time. In this study, we aimed to propose a facile synthesis route to fabricate FHA nanorods without any surfactants using an electrochemical deposition method for the first time. This study focused on preparing FHA nanorods without the assistance of any surfactant, unlike the traditional synthesis methods, to avoid chemical impurities. FHA nanorods with lengths of 124–2606 nm, diameters of 28–211 nm, and aspect ratios of 4.4–21.8 were synthesized using the electrochemical method, followed by a heat treatment. For the as-synthesized FHA nanorods, the Ca/P ratio was 1.60 and the atomic concentration of F was 2.06 at.%. An ultrastructure examination revealed that each FHA nanorod possessed long-range order, good crystallinity, and a defect-free lattice with a certain crystallographic plane orientation along the whole rod. In short, we propose a novel, surfactant-free, cost-saving, and more efficient route to synthesize FHA nanorods which can be widely applied in multiple biomedical applications, including drug delivery, bone repair, and restorative dentistry.     

Lactones in the Synthesis of Prostaglandins and Prostaglandin Analogs

In the total stereo-controlled synthesis of natural prostaglandins (PGs) and their structural analogs, a vast class of compounds and drugs, known as the lactones, are encountered in a few key steps to build the final molecule, as: δ-lactones, γ-lactones, and 1,9-, 1,11-, and 1,15-macrolactones. After the synthesis of 1,9-PGF_2α and 1,15-PGF_2α lactones, many 1,15-lactones of E₂, E₃, F₂, F₃, A₂, and A₃ were found in the marine mollusc Tethys fimbria and the quest for understanding their biological role stimulated the research on their synthesis. Then 1,9-, 1,11-, and 1,15-PG lactones of the drugs were synthesized as an alternative to the corresponding esters, and the first part of the paper describes the methods used for their synthesis. The efficient Corey procedure for the synthesis of prostaglandins uses the key δ-lactone and γ-lactone intermediates with three or four stereocenters on the cyclopentane fragment to link the PG side chains. The paper describes the most used procedures for the synthesis of the milestone δ-Corey-lactones and γ-Corey-lactones, their improvements, and some new promising methods, such as interesting, new stereo-controlled and catalyzed enantioselective reactions, and methods based on the chemical/enzymatic resolution of the compounds in different steps of the sequences. The many uses of δ-lactones not only for the synthesis of γ-lactones, but also for obtaining 9β-halogen-PGs and halogen-substituted cyclopentane intermediates, as synthons for new 9β-PG analogs and future applications, are also discussed.     

NanoPaint: A Tool for Rapid and Dynamic Imaging of Membrane Structural Plasticity at the Nanoscale

Single‐particle tracking with quantum dots (QDs) constitutes a powerful tool to track the nanoscopic dynamics of individual cell membrane components unveiling their membrane diffusion characteristics. Here, the nano‐resolved population dynamics of QDs is exploited to reconstruct the topography and structural changes of the cell membrane surface with high temporal and spatial resolution. For this proof‐of‐concept study, bright, small, and stable biofunctional QD nanoconstructs are utilized recognizing the endogenous neuronal cannabinoid receptor 1, a highly expressed and fast‐diffusing membrane protein, together with a commercial point‐localization microscope. Rapid QD diffusion on the axonal plasma membrane of cultured hippocampal neurons allows precise reconstruction of the membrane surface in less than 1 min with a spatial resolution of tens of nanometers. Access of the QD nanoconstructs to the synaptic cleft enables rapid 3D topological reconstruction of the entire presynaptic component. Successful reconstruction of membrane nano‐topology and deformation at the second time‐scale is also demonstrated for HEK293 cell filopodia and axons. Named “nanoPaint,” this super‐resolution imaging technique amenable to any endogenous transmembrane target represents a versatile platform to rapidly and accurately reconstruct the cell membrane nano‐topography, thereby enabling the study of the rapid dynamic phenomena involved in neuronal membrane plasticity.     

高分辨连续光源原子吸收光谱法测定铀铌铅多金属矿中痕量银

铀铌铅多金属矿组成成分复杂,准确有效的测定其中的痕量银,有利于银的回收利用。采用HCl-HNO₃-HF-HClO₄处理铀铌铅多金属矿样品,以HCl(1+4)-2g/L酒石酸为测定介质,以λ_Ag=328.068nm为分析谱线,建立了高分辨连续光源原子吸收光谱法(HR-CS-AAS)测定铀铌铅多金属矿样品中痕量银的新方法。对仪器参数进行了优化,确定采用迭代基线校正(IBC)背景校正方式,CCD检测器有效像素点选择5个;由银的平均吸收光谱图和吸光度-波长-时间三维吸收光谱图可知,银的CCD检测器分辨率为0.0020nm/pixel,λ_Ag=328.068nm在327.86~328.27nm范围内没有受到溶液中其他共存元素的谱线干扰。在优化的实验条件下,银的吸光度与其质量浓度在0.40~1.60μg/mL范围内运用二次方程最小二乘法拟合校准曲线,相关系数为0.9999,特征浓度为0.0148μg/mL,方法检出限为0.0013μg/mL。将HR-CS-AAS测定样品中银的参数与空心阴极灯原子吸收光谱法(HCL-AAS)相比,其检出限更低,特征浓度更低,标准溶液系列的吸光度更高。按照实验方法对铀铌铅多金属矿样品中的银进行测定,结果与电感耦合等离子体质谱法基本一致,相对标准偏差(RSD,n=9)为0.63%~3.3%。按实验方法在铀铌铅多金属矿样品中加入银标准溶液进行加标回收试验,回收率为97%~104%,满足国家地质矿产行业标准DZ/T 0130—2006的要求。     

基于自回归谱外推的全聚焦成像分辨力提升

针对相邻缺陷全聚焦超声成像混叠问题，结合低阶、宽有效频带自回归谱外推方法，压缩超声波时域脉冲宽度，实现亚波长级全聚焦（Total focusing method，TFM）成像分辨力。建立碳钢试块模型，设置两个中心间距1.8 mm，直径1.3 mm圆孔，选用中心频率2.25 MHz，32阵元相控阵探头采集全矩阵数据。针对全矩阵数据，选择自回归阶数为2，信号频谱最大幅值下降14 dB为有效频带，建立自回归模型并外推有效频带外的高频与低频成分，随后对全矩阵数据进行延迟叠加处理和TFM成像。仿真结果表明，低阶、宽有效频带自回归谱外推处理方法具有较高的鲁棒性和准确性，TFM成像后可有效分离中心间距0.7λ（λ为超声波长）圆孔，保留缺陷横向位置信息的同时，定位误差不超过0.73%。对碳钢试块中相同位置及尺寸的圆孔进行试验验证，定位误差不超过1.06%，有效地提高TFM成像分辨力。     

Q值正演模拟约束下的零偏移距VSP资料Q值估算

随着油气勘探目的层逐步走向深部,球面扩散、透射损失、环境噪声等使得VSP资料的初至子波发生改变,导致常规的Q值估算方法质量难以得到保证。为此,利用塔里木盆地托甫台地区TP327井零偏移距VSP资料,综合考虑透射损失和球面扩散的影响,提出一种Q值正演模拟约束下的零偏移距VSP资料Q值估算方法。该方法通过研究区的纵波速度、横波速度和密度建立层状地质模型,利用射线追踪的方法,用大地吸收介质模型的Q值正演模拟结果,对频谱比法和经验公式估算的初始Q值进行修正,使得Q值正演模拟结果与实际地震波的衰减记录在频谱特征上吻合,从而得到更为精确的Q模型。TP327井Q值估算结果表明,该方法与李庆忠经验公式得到的结果在浅层比较接近,但在中层和深层,两者差异较大;Q值正演模拟结果约束的子波与实际VSP资料子波的频谱比较吻合,证实用Q值正演模拟约束得到的层间Q值更为可靠。利用Q值正演模拟约束方法得到的Q模型对研究区地震资料进行反Q滤波能显著提高地震资料分辨率,有助于提高碳酸盐岩地层中缝洞的识别精度。     

光伏用电致发光缺陷检测仪空间分辨率的量化评估

针对光伏用电致发光缺陷检测仪空间分辨率目视判定重复性、准确性差,并且难以量化等问题,提出一套基于卷积神经网络模型的空间分辨率量化评估方法。参照相关标准JJF(闽)1088-2018,采取不同的拍摄条件拍摄并切割出空间分辨率线对图像,对图像进行人工分类。设计卷积神经网络结构,采用卷积层、池化层和全连接层结构,并使用已分类完成的空间分辨率线对图像对模型进行训练。最终使用测试集对模型进行评估,结果表明,模型在测试集上的判别正确率达到99.2%。该方法满足使用要求,可取代目视判别,提高了光伏用电致发光缺陷检测仪空间分辨率判定的准确性与重复性,并为其量化提出了新的解决思路。由于太阳电池片用光致发光缺陷检测仪与光伏用电致发光缺陷检测仪的成像方式类似,该方法可兼容太阳电池片光致发光检测仪的性能评估。     

太赫兹脉冲焦平面成像技术的发展与应用

作为太赫兹技术中的重要组成部分,太赫兹脉冲焦平面成像一经问世就引起了行业内的广泛关注,人们引入了各种方法去提升此成像技术的测量性能,同时也尝试将此成像技术应用于不同的工业和基础研究领域。本文综述了近年来人们对太赫兹脉冲焦平面成像的技术改良和应用研究,包括提升成像系统的空间分辨率、信噪比、信息获取能力,以及将此成像技术应用于光谱识别检测、超表面器件功能验证、太赫兹特殊光束测量、太赫兹表面波观测等,希望该综述能够推动太赫兹脉冲焦平面成像的进一步技术革新和应用拓展。