Combining a new baseboard radiator with a fan coil system for improving heating performance and reduce energy consumption

In the present work, the heating performance of a new system combined with a new modified baseboard radiator and fan coil is investigated. Using longitudinal fins with special geometry and also forced airflow at the end of the system causes that at the lower inlet water temperature compared with the conventional models, higher heat output rate be obtained. The heat output rate of the new modified system is obtained by experimental metrology based on the European Standard No. EN-442. Temperature and velocity distribution in the room space is done by simulation of the modified system in the Flovent software. Computational fluid dynamics (CFD) results are validated against experimental results and there is a good agreement between them. Also, the energy consumption of the system during the winter season is calculated in TRANSYS software. Experimental results show that the heat output rate of a new modified heating system with inlet water temperature in the range of 45–55°C is on average 4.17 times higher compared with the conventional model. CFD simulation also showed that the combined system provides good thermal comfort conditions. Energy consumption of the new system reduced about 13% compared with conventional models.     

Firs-principles investigation of ZrCo and its hydrides

The electronic structures of Zr₈Co₈ and its hydrides have been systematically investigated using the first-principles calculation based on density functional theory. Additionally, the influence of the Ti and Hf doping on the atomic bonding properties of Zr₈Co₈ and its hydrides (Zr₇HfCo₈, Zr₇HfCo₈H, Zr₁₆Co₁₅HfH₄₈, Zr₇TiCo₈, Zr₇TiCo₈H, and Zr₁₆Co₁₅TiH₄₈ compounds) were also studied to provide new insights into the hydrogenation of Zr₈Co₈. The Ti and Hf atoms were occupied the Zr position in the ZrCo alloy, while they were occupied the Co position in the Zr₁₆Co₁₆H₄₈ system. Ti and Hf doping could achieve the purpose of anti-disproportionation. Ti and Hf could weak the Zr–Co bond for the improvement of the hydrogenation performance of Zr₈Co₈, and the covalence of the Co–H bond was higher than that of the Zr–H bond. The existence of a Co–H covalent bond in the crystal is conducive to the hydrogen absorption of Zr₈Co₈ to form Zr₁₆Co₁₆H₄₈. Inhibition of Co–H interaction during Zr₈Co₈ hydrogenation can accelerate the formation of Zr₈Co₈H for the improvement of its hydrogenation performance.     

Computing approximate blocking probabilities for transparent waveband switching based WDM networks using hierarchical cross-connects

An analytical model is presented to study the dynamics of wavelength division multiplexing (WDM) networks with waveband switching (WBS). The reduced load approximation method is considered to compute approximated network blocking probabilities in WBS-based WDM networks. The analytical model considers the link blocking probability due to insufficient link capacity and an impact of the waveband granularity (G). The analytical model also considers the node blocking probability due to unavailability of a switch port at the wavelength cross connect (WXC) layer of an Hierarchical cross connect (HXC) switch node. The set of nonlinear equations is obtained with the link independence assumption and solved using repeated substitutions. The accuracy of the analytical model is examined by comparing with simulation results considering the random-fit algorithm for waveband and wavelength assignments in different network scenarios. Lightpaths are routed between source and destination (s-d) HXC switch nodes using shortest path first (SPF) routing. An impact of the switch parameter to limit the input and the output WXC switch ports of an HXC switching node is also being investigated using the analytical model as well as through simulation results.     

小尺度交通信号灯的检测与状态识别

交通信号灯识别包括检测和状态识别，在智能交通系统中发挥重要作用。基于YOLOv3算法提出了一种交通信号灯检测与状态识别模型。针对交通信号灯相较于交通场景中其他目标具有尺度小的特性进行了算法的设计：降低骨干网络的下采样倍率以增加小尺度目标的特征描述能力；通过增大特征图的尺度来改进多尺度特征融合；引入广义交并比作为检测任务的损失函数来改进目标边界框的回归效果。同时，根据交通信号灯本身的特性，使用颜色和形状约束的方法对信号灯进行状态识别和类别验证。最后在公开的Bosch交通信号灯数据集上和实际的城区道路进行了实验验证。实验结果表明，所提出的算法能够提升交通信号灯识别的精度和召回率，识别准确率可以达到90%左右。     

The benefits of integrated eye tracking with airborne image recorders in the flight deck: A rejected landing case study

Aircraft accident investigation has played a pivotal role in improving the safety of aviation. Advances in recorder technology, specifically Cockpit Voice Recorders (CVRs) and Flight Data Recorders (FDR) have made a huge contribution to the understanding of occurrences for accident investigators. However, even these recorders have limitations such as the evidence they provide about pilots' situation awareness or behaviours. Supplementing audio and data recordings with video has been discussed for many years and whilst there continues to be debate among regulators, operators, manufacturers and pilot unions, the International Civil Aviation Organization (ICAO) has mandated Airborne Image Recorders (AIR) from 2023. The purpose of installing such systems is to provide evidence of crew operational behaviours in terms of both human-human and human-computer interactions (HCI) on the flight deck. Video alone is unlikely to provide sufficient evidence for investigators. This study examines the additional value that eye-tracking technology may provide through the case study of an accident involving an Airbus A330-300 aircraft which experienced a rejected landing. Currently, the investigation of such events, where crew interaction with automation is critical to their situation awareness, relies heavily on interview data. Such data may be unavailable (in the case of serious injury) or unreliable (based on hindsight bias). By integrating eye tracking technology into an AIR, accident investigators will potentially gain a better understanding of pilots’ visual scan patterns across flight deck instrumentation. This has implications for flight deck and procedural design as well as training and simulation.     

The effect of traffic data source on deterioration rates of heavy-duty flexible pavements

The purpose of this study is to assess the effect of traffic data source (estimated vs. actual) on predicted progression rates of roughness and rutting for heavy-duty flexible pavements of rural freeways. Progression rates are predicted using calibrated HDM-4 models. The assessment is performed in terms of variations in maintenance intervention timing associated with the variations in progression rates. Time series pavement condition data (covering 3–5 years) have been collected for 7 sections of rural freeways for use in calibrating HDM-4 deterioration models. They range in length from 10 to 60.8 km and cover different traffic volumes, climate zones and subgrade soil types. For these sections, estimated annual average daily traffic (AADT), growth factors and assumed loading have been extracted from relevant database. Only six segments of these sections have Weigh-in-Motion (WIM) sites so relevant actual AADT, growth factors and axle load distributions have been extracted from WIM reports. The results of running the calibrated HDM-4 deterioration models using different traffic data show that actual traffic data from WIM sites result in higher rates of deterioration to that of estimated data for four sites, resulting in earlier intervention timing and higher present value agency cost. The other two sites have lower rates with actual data due to lower traffic loading than estimated.     

Applications of sketches in network traffic measurement: A survey

Accurate and timely network traffic measurement is essential for network status monitoring, network fault analysis, network intrusion detection, and network security management. With the rapid development of the network, massive network traffic brings severe challenges to network traffic measurement. However, existing measurement methods suffer from many limitations for effectively recording and accurately analyzing big-volume traffic. Recently, sketches, a family of probabilistic data structures that employ hashing technology for summarizing traffic data, have been widely used to solve these problems. However, current literature still lacks a thorough review on sketch-based traffic measurement methods to offer a comprehensive insight on how to apply sketches for fulfilling various traffic measurement tasks. In this paper, we provide a detailed and comprehensive review on the applications of sketches in network traffic measurement. To this end, we classify the network traffic measurement tasks into four categories based on the target of traffic measurement, namely cardinality estimation, flow size estimation, change anomaly detection, and persistent spreader identification. First, we briefly introduce these four types of traffic measurement tasks and discuss the advantages of applying sketches. Then, we propose a series of requirements with regard to the applications of sketches in network traffic measurement. After that, we perform a fine-grained classification for each sketch-based measurement category according to the technologies applied on sketches. During the review, we evaluate the performance, advantages and disadvantages of current sketch-based traffic measurement methods based on the proposed requirements. Through the thorough review, we gain a number of valuable implications that can guide us to choose and design proper traffic measurement methods based on sketches. We also review a number of general sketches that are highly expected in modern network systems to simultaneously perform multiple traffic measurement tasks and discuss their performance based on the proposed requirements. Finally, through our serious review, we summarize a number of open issues and identify several promising research directions.     

KSUTraffic: A Microscopic Traffic Simulator for Traffic Planning in Smart Cities

Simulation is a powerful tool for improving, evaluating and analyzing the performance of new and existing systems. Traffic simulators provide tools for studying transportation systems in smart cities as they describe the evolution of traffic to the highest level of detail. There are many types of traffic simulators that allow simulating traffic in modern cities. The most popular traffic simulation approach is the microscopic traffic simulation because of its ability to model traffic in a realistic manner. In many cities of Saudi Arabia, traffic management represents a major challenge as a result of expansion in traffic demands and increasing number of incidents. Unfortunately, employing simulation to provide effective traffic management for local scenarios in Saudi Arabia is limited to a number of commercial products in both public and private sectors. Commercial simulators are usually expensive, closed source and inflexible as they allow limited functionalities. In this project, we developed a local traffic simulator “KSUtraffic” for traffic modeling, planning and analysis with respect to different traffic control strategies and considerations. We modeled information specified by GIS and real traffic data. Furthermore, we designed experiments that manipulate simulation parameters and the underlying area. KSUTraffic visualizes traffic and provides statistical results on the simulated traffic which would help to improve traffic management and efficiency.     

运营高速公路 40m 预制箱梁拆换施工技术研究

对于运营高速公路40m箱梁拆换施工，梁体的切割、吊装、运输、架设等受作业空间和环境的限制，增加了施工困难和风险，新旧箱梁在高速公路上的长距离运输为施工增加了成本和安全风险，同时也决定了箱梁拆换的总体进度。韩河大桥梁体拆换工程按期顺利实施完成，有效化解了以上问题，取得了良好的经济、社会效益。