Effect of phosphogypsum on saline-alkalinity and aggregate stability of bauxite residue

A column experiment was conducted to investigate the effect of phosphogypsum (PG) on the saline- alkalinity, and aggregate stability of bauxite residue. Results showed that: with increasing leaching time, the concentrations of saline-alkali ions decreased while the concentration increased in bauxite residue leachate; compared with CK (control group) treatment, pH, electric conductivity (EC), exchangeable sodium percentage (ESP), sodium absorption ratio (SAR), and exchangeable Na⁺ content of bauxite residue were reduced following PG treatment; average particle sizes in aggregates following CK and PG treatments were determined to be 155 and 193 nm, respectively. SR-μCT test results also confirmed that bauxite residue following PG treatment acquired larger aggregates and larger pore diameter. These results indicate that the PG treatment could significantly modulate the saline-alkalinity, and simultaneously enhance aggregate stability of bauxite residue, which provides a facile approach to reclaim bauxite residue disposal areas.     

Turbulent boundary layer control with a spanwise array of DBD plasma actuators

The turbulent boundary layer control on NACA 0012 airfoil with Mach number ranging from 0.3 to 0.5 by a spanwise array of dielectric barrier discharge(DBD)plasma actuators by hot-film sensor technology is investigated.Due to temperature change mainly caused through heat produced along with plasma will lead to measurement error of shear stress measured by hot-film sensor,the correction method that takes account of the change measured by another sensor is used and works well.In order to achieve the value of shear stress change,we combine computational fluid dynamics computation with experiment to calibrate the hot-film sensor.To test the stability of the hot-film sensor,seven repeated measurements of shear stress at Ma = 0.3 are conducted and show that confidence interval of hot-film sensor measurement is from-0.18 to 0.18 Pa and the root mean square is 0.11 Pa giving a relative error 0.5％over all Mach numbers in this experiment.The research on the turbulent boundary layer control with DBD plasma actuators demonstrates that the control makes shear stress increase by about 6％over the three Mach numbers,which is thought to be reliable through comparing it with the relative error 0.5％,and the value is hardly affected by burst frequency and excitation voltage.     

基于智能建造的某大型安置房项目安全管理方法应用

某大型安置房项目施工中,应用智能建造包含的综合管理平台技术、5G传输技术、无人塔式起重机智能安装技术、智能机器人和区块链技术,降低了安全风险,提高了安全管理水平.     

Fabrication of Nd-doped Ni–Zn ferrite/multi-walled carbon nanotubes composites with effective microwave absorption properties

The electromagnetic materials are featured by good magnetic permeability and dielectric constant characteristics, which are of significant importance in solving the pollution problem of electromagnetic. In this study, after the complete of the use of sol-gel method, argon gas was then introduced for calcination, and eventually a new type of MWCNTs/Ni_0.5Zn_0.5Nd_0.04Fe_1.96O₄ composites was synthesized after the above mentioned procedures. The synthesized MWCNTs were able to be adsorbed on the surface of Ni_0.5Zn_0.5Nd_0.04Fe_1.96O₄ and could form a good conductive work of 3D. Also, the effect of additional MWCNTs on microwave absorption properties of MWCNTs/Ni_0.5Zn_0.5Nd_0.04Fe_1.96O₄ composites were also observed in this study. The results indicate that the additional MWCNTs function to significantly improve the microwave absorption property of MWCNTs/Ni_0.5Zn_0.5Nd_0.04Fe_1.96O₄. Through altering the amount of MWCNTs, the microwave attenuation performance and impedance matching coefficient of this electromagnetic materials can be effectively improved. The S2 sample presented a minimum reflection loss of ?35.05 dB when its thickness reached 1.6 mm, meanwhile, the effective absorption bandwidth achieved 4.55 GHz. The prepared composites perform well in microwave absorption, which can attribute to the reasonable ratio of composites as well as its interaction with both of the magnetic and dielectric components. This research paved the way for novel ideas to be put in the electromagnetic absorption materials with high-efficient.     

一种飞行计划航段自动激活方法

飞机从一个航段飞向下一个航段时,需要对下个航段是否激活进行判断.提出了一种新的飞行计划航段自动激活方法,通过获取飞机当前位置及其磁差,并结合临近的3个航路点对应位置的磁差经纬度,分别计算3个航路点与飞机位置对应的磁航向角,通过磁航向角之间做差进行比较,进而判断是否被激活.算法推导完成后,通过基于模型的系统工程工具SCADE SUITE进行了建模,并结合杰普逊航图进行了实际数据采样与仿真.仿真结果表明:该航段自动激活方法能够有效稳定地激活下一航段,比传统方法计算简便,方法实用有效.已在实际飞行中成功应用,达到了预期效果.     

基于多媒体技术的思想政治教育课程资源整合系统

为解决资源种类划分结果异常,设计基于多媒体技术的思想政治教育课程资源整合系统。选用CYUSB3014芯片作为此次设计系统的主控芯片,并设定信息处理芯片以及外围电路。在此基础上,对思政课程信息进行分类,建立了课程资源库。优化资源整合模块,设定多媒体资源整合流程,并添加DataSet与.NET Framework数据处理程序,实现对多媒体数据的高效处理。构建系统测试环节显示,此系统资源种类划分结果较为合理且系统承载率较高。由此可知,此系统在应用中具有较高的综合性能。     

基于一维卷积神经网络的浮置板钢弹簧损伤检测方法

钢弹簧浮置板轨道可有效缓解地铁带来的环境振动问题,但目前针对钢弹簧损伤检测方法的研究尚十分匮乏.本文提出了一种基于一维卷积神经网络(1D-CNN)的钢弹簧损伤检测方法,利用轨道板垂向加速度构建数据集,通过1D-CNN对经简单预处理的原始数据进行特征提取并对损伤情形下的数据和正常情形下的数据进行分类.为评估该方法的性能,基于车辆-浮置板轨道耦合动力学仿真生成了数据集,分析了不同运行工况对网络性能的影响,结果表明该方法具有良好的数据分类准确性.     

超高效液相色谱-飞行时间质谱法快速分析测定山药中7种常见杀菌剂

目的 建立超高效液相色谱-飞行时间质谱检测山药中7种常见杀菌剂的分析方法。方法 样品经乙腈提取，水浴氮吹至近干，丙酮定容，经超高效液相色谱-飞行时间质谱检测。结果 在正离子模式下，7种杀菌剂在水-甲醇（均含有0.01%甲酸和5 mmol/L甲酸铵）流动相中都具有较好的响应；0.01~0.40 mg/L范围内线性良好，相关系数R均大于0.999。不同温度（50℃、70℃）水浴实验结果表明70℃水浴温度符合实验要求。三个浓度水平的加标回收实验的回收率为70.75％～108.07％，相对标准偏差为 0.02％～5.01％。结论 该方法操作简单、分析准确，满足山药中常见杀菌剂的检测要求。