Physical characteristics of AFEX-pretreated and densified switchgrass,prairie cord grass,and corn stover

The goal of the study was to evaluate and compare the physical properties of control, pretreated and densified corn stover, switchgrass, and prairie cord grass samples. Ammonia Fiber Expansion (AFEX) pretreated switchgrass, corn stover, and prairie cord grass samples were densified by using the comPAKco device developed by Federal Machine Company of Fargo, ND. The densified biomass were referred as “PAKs” in this study. All feedstocks were ground into three different grind size of 2, 4 and 8 mm prior to AFEX pretreatment and the impact of grinding on pellet properties was studied. The results showed that the physical properties of AFEX-PAKed material were not influenced by the initial grind size of the feedstocks. The bulk density of the AFEX-PAKed biomass increased by 1.2–6 fold as compared to untreated and AFEX-pretreated materials. The durability of the AFEX-PAKed materials were between 78.25 and 95.2%, indicating that the AFEX-PAKed biomass can be transported easily. To understand the effect of storage on the physical properties of these materials, samples were stored in the ambient condition (20 ± 2 °C and 70 ± 5% relative humidity) for six months. After storage, thermal properties of the biomass did not change but glass transition temperature decreased. The water absorption index and water solubility index of AFEX-treated and AFEX-PAKed biomass showed mixed trends after storage. Moisture content decreased and durability increased upon storage.     

Design and experimental investigation of the high efficiency 1.5 W/4.2 K pneumatic-drive G-M cryocooler

The development of a high cooling power and high efficiency 4.2 K two stage G-M cryocooler is critically important given its broad applications in low temperature superconductors, MRI, infrared detector and cryogenic electronics. A high efficiency 1.5 W/4.2 K pneumatic-drive G-M cryocooler has recently been designed and developed by ARS. The effect of expansion volume rate and operation conditions on the cooling performance has been experimentally investigated. A typical cooling performance of 1.5 W/4.2 K has been achieved, and the minimum temperature of the second stage is 2.46 K. The steady input power of the compressor at 60 Hz is 6.8 kW, while the operation speed of the rotary valve is 30 rpm. A maximum cooling power of 1.75 W/4.2 K has been obtained in test runs.     

Formation of high-density scintillation ceramic from LuAG:Ce + Lu2O3 powders obtained by co-precipitation method

The results of formation of the high density effective scintillation ceramics consisting of two compounds of the cubic symmetry, LuAG:Ce and Lu₂O₃ (LuAG:Ce + Lu₂O₃), are described. Powders of a novel material LuAG:Ce + Lu₂O₃ were synthesized by co-precipitation method. The introduction of Lu₂O₃ into LuAG:Ce was shown to increase the density of the ceramics obtained and modify its scintillation properties.     

Investigation on phase shifting for a 4 K Stirling pulse tube cryocooler with He-3 as working fluid

He-3 is generally recognized for its ability to provide more excellent thermophysical performance than He-4, especially in the 4 K temperature range. However, this was not always the case in our preliminary experiments on a three-stage Stirling-type pulse tube cryocooler (SPTC). Our ongoing studies, as reported in this paper, demonstrate that the different working fluids also affect the performance through their phase shifting capability. This feature has been passed over in large part by researchers considering refrigerant substitution. Unlike previous theoretical analyses that focus primarily on regenerator losses, this report investigates the effects of the working fluid on the phase angle at the cold end in order to quantitatively reveal the relationship between the lowest attainable temperature and the cooling capacity. The analysis agrees well with our experimental results on a three-stage SPTC. While running with the operating parameters optimized for He-3, the lowest temperature of the SPTC decreased from 5.4 K down to 4.03 K. This is the lowest refrigeration temperature ever achieved with a three-stage SPTC.     

Study of metal assisted anisotropic chemical etching of silicon for high aspect ratio in crystalline silicon solar cells

Textured surface is commonly used to enhance the efficiency of silicon solar cells by reducing the overall reflectance and improving the light scattering. In this study, a comparison between isotropic and anisotropic etching methods was investigated. The deep funnel shaped structures with high aspect ratio are proposed for better light trapping with low reflectance in crystalline silicon solar cells. The anisotropic metal assisted chemical etching (MACE) was used to form the funnel shaped structures with various aspect ratios. The funnel shaped structures showed an average reflectance of 14.75% while it was 15.77% for the pillar shaped structures. The average reflectance was further reduced to 9.49% using deep funnel shaped structures with an aspect ratio of 1:1.18. The deep funnel shaped structures with high aspect ratios can be employed for high performance of crystalline silicon solar cells.     

Alloying behavior and novel properties of CoCrFeNiMn high-entropy alloy fabricated by mechanical alloying and spark plasma sintering

An equiatomic CoCrFeNiMn high-entropy alloy was synthesized by mechanical alloying (MA) and spark plasma sintering (SPS). During MA, a solid solution with refined microstructure of 10 nm which consists of a FCC phase and a BCC phase was formed. After SPS consolidation, only one FCC phase can be detected in the HEA bulks. The as-sintered bulks exhibit high compressive strength of 1987 MPa. An interesting magnetic transition associated with the structure coarsening and phase transformation was observed during SPS process.     

Sanitary legislation governing Food Services in Brazil

The Technical Regulation of Good Practices for Brazilian Food Services (Regulamento Técnico de Boas Práticas para Serviços de Alimentação do Brasil) can be complemented by sanitary surveillance agencies at the state, district and municipal levels by tailoring it to location-specific requirements. The purpose of the present study was to survey sanitary legislation governing Brazilian Food Services. During the period from November 2011 to November 2012, a survey was conducted with the sanitary surveillance agencies from the various states, capitals and the Federal District. A previously prepared and tested tool was used for data collection, comprising 10 questions. Only 10 (19.2%) of the sanitary codes had been established prior to RDC Resolution n° 216/2004 and were not complementary. Of the legislation cited as complementary, only the states of Santa Catarina, Rio Grande do Sul and São Paulo and the capital of the state of São Paulo truly presented additional and location-specific aspects. No legislation that was specific to hospital kitchens was found. The majority of participating coordination, including the Evaluation List for Good Practices in Food Services, was also verified; however, it had not been published. In conclusion, a gap in sanitary surveillance services exists, which was caused by the lack of location-specific food service regulations.     

Efficient tri-wavelength actively Q-switched Yb:GAGG laser

An efficient acousto-optic Q-switched Yb-doped Gd₃Al_xGa_5−xO₁₂ (GAGG) (x = 0.5) laser is demonstrated. Under the absorbed pump power of 7.4 W, the maximum average output power of 1.4 W is obtained at the pulse repletion rate of 1 kHz , with the slope efficiency as high as 32%. The pulse width of 40 ns is achieved with the pulse energy and peak power of 1.4 mJ and 35 kW, respectively. What’ more, the output spectrum shows itself tri-wavelength in either CW or Q-switching mode. To our knowledge, this is the first time for realizing simultaneous tri-wavelength Yb:GAGG laser actively Q-switched operation.     

Mechanical properties of graphene films enhanced by homo-telechelic functionalized polymer fillers via π–π stacking interactions

Most researches on graphene/polymer composites are focusing on improving the mechanical and electrical properties of polymers at low graphene content instead of paying attention to constructing graphene’s macroscopic structures. In current study the homo-telechelic functionalized polyethylene glycols (FPEGs) were tailored with π-orbital-rich groups (namely phenyl, pyrene and di-pyrene) via esterification reactions, which enhanced the interaction between polyethylene glycol (PEG) molecules and chemical reduced graphene oxide (RGO) sheets. The π–π stacking interactions between graphene sheets and π-orbital-rich groups endowed the composite films with enhanced tensile strength and tunable electrical conductivity. The formation of graphene network structure mediated by the FPEGs fillers via π–π stacking non-covalent interactions should account for the experimental results. The experimental investigations were also complemented with theoretical calculation using a density functional theory. Atomic force microscope (AFM), scanning electron microscope (SEM), X-ray diffraction (XRD), nuclear magnetic resonance (NMR), thermal gravimetric analysis (TGA), UV–vis and fluorescence spectroscopy were used to monitor the step-wise preparation of graphene composite films.     

WinClastour—a Visual Basic program for tourmaline formula calculation and classification

WinClastour is a Microsoft^® Visual Basic 6.0 program that enables the user to enter and calculate structural formulae of tourmaline analyses obtained both by the electron-microprobe or wet-chemical analyses. It is developed to predict cation site-allocations at the different structural positions, as well as to estimate mole percent of the end-members of the calcic-, alkali-, and X-site vacant group tourmalines. Using the different normalization schemes, such as 24.5 oxygens, 31 anions, 15 cations (T+Z+Y), and 6 silicons, the present program classifies tourmaline data based on the classification scheme proposed by Hawthorne and Henry [1999. Classification of the minerals of the tourmaline group. European Journal of Mineralogy 11, 201–215]. The present program also enables the user Al–Mg disorder between Y and Z sites. WinClastour stores all the calculated results in a comma-delimited ASCII file format. Hence, output of the program can be displayed and processed by any other software for general data manipulation and graphing purposes. The compiled program code together with a test data file and related graphic files, which are designed to produce a high-quality printout from the Grapher program of Golden Software, is approximately 3 Mb as a self-extracting setup file.