The Interfacial Interactions of Glycine and Short Glycine Peptides in Model Membrane Systems

The interactions of amino acids and peptides at model membrane interfaces have considerable implications for biological functions, with the ability to act as chemical messengers, hormones, neurotransmitters, and even as antibiotics and anticancer agents. In this study, glycine and the short glycine peptides diglycine, triglycine, and tetraglycine are studied with regards to their interactions at the model membrane interface of Aerosol-OT (AOT) reverse micelles via ¹H NMR spectroscopy, dynamic light scattering (DLS), and Langmuir trough measurements. It was found that with the exception of monomeric glycine, the peptides prefer to associate between the interface and bulk water pool of the reverse micelle. Monomeric glycine, however, resides with the N-terminus in the ordered interstitial water (stern layer) and the C-terminus located in the bulk water pool of the reverse micelle.     

稀土灼烧过程温湿度场仿真分析

影响稀土灼烧工艺的因素十分复杂,关系产品质量稳定及能耗,现行工艺存在优化空间。通过剖析灼烧窑中温度和湿度分布状况,运用κ-ε双方程湍流模型、流体传热、多孔介质传热等理论,按特定组分运输模式,建立灼烧过程质量、动量和能量耦合传递数学模型。设置不同边界导入Fluent环境对数学模型进行仿真试验,完成数据处理实现工艺参数优化。结果表明所建模型能准确反映灼烧窑中温湿度场分布及变化,且最终仿真结果与实际灼烧后的产品湿度含量相符合。     

Skeleton parsing for complex question answering over knowledge bases

Answering complex questions involving multiple relations over knowledge bases is a challenging task. Many previous works rely on dependency parsing. However, errors in dependency parsing would influence their performance, in particular for long complex questions. In this paper, we propose a novel skeleton grammar to represent the high-level structure of a complex question. This lightweight formalism and its BERT-based parsing algorithm help to improve the downstream dependency parsing. To show the effectiveness of skeleton, we develop two question answering approaches: skeleton-based semantic parsing (called SSP) and skeleton-based information retrieval (called SIR). In SSP, skeleton helps to improve structured query generation. In SIR, skeleton helps to improve path ranking. Experimental results show that, thanks to skeletons, our approaches achieve state-of-the-art results on three datasets: LC-QuAD 1.0, GraphQuestions, and ComplexWebQuestions 1.1.     

Domain reversal and current transport property in BiFeO3 films

The electrical properties and domain reversal in BiFeO₃ ferroelectric films were studied using sandwiched heterostructures and piezoresponse force microscopy. A robust polarization state was observed, combined with a switchable domain pattern and a remanent polarization of approximately 100 μC cm^?2. In addition, domain reversal was explored using scanning probe microscopy. The results show that dipoles could be reversed along the direction of the electric field under a negative tip bias, leading to carrier gathering near the domain walls. The enhanced conductivity near the domain walls was owing to the discontinuous polarization boundary conditions. In addition, typical diode-like current transport properties are sensitive to various temperature conditions, which is attributed to the Schottky barriers at the contact interface. These findings extend the current understanding of domain texture reversal in ferroelectric films and shed light on their potential applications for future ferroelectric random-access memory operations over a wide temperature range.     

4D Printing of Shape Memory Materials for Textiles: Mechanism,Mathematical Modeling,and Challenges

Shape memory materials (SMMs) in 3D printing (3DP) technology garnered much attention due to their ability to respond to external stimuli, which direct this technology toward an emerging area of research, “4D printing (4DP) technology.” In contrast to classical 3D printed objects, the fourth dimension, time, allows printed objects to undergo significant changes in shape, size, or color when subjected to external stimuli. Highly precise and calibrated 4D materials, which can perform together to achieve robust 4D objects, are in great demand in various fields such as military applications, space suits, robotic systems, apparel, healthcare, sports, etc. This review, for the first time, to the best of the authors’ knowledge, focuses on recent advances in SMMs (e.g., polymers, metals, etc.) based wearable smart textiles and fashion goods. This review integrates the basic overview of 3DP technology, fabrication methods, the transition of 3DP to 4DP, the chemistry behind the fundamental working principles of 4D printed objects, materials selection for smart textiles and fashion goods. The central part summarizes the effect of major external stimuli on 4D textile materials followed by the major applications. Lastly, prospects and challenges are discussed, so that future researchers can continue the progress of this technology.     

Precipitous weakening of quartz at the α–β phase inversion

Crystalline quartz has long been identified as among the weakest of abundant crustal minerals. This weakness is particularly evident around the α–β phase inversion at 573°C, in which Si–O bonds undergo a displacive structural transformation from trigonal to hexagonal symmetry. Here we present data using indentation testing methodologies that highlight the precipitous extent of the transformational weakening. Although the indentations are localized over relatively small specimen contact areas, the data quantify the essential deformation and fracture properties of quartz in a predominantly (but not exclusively) compressive stress field, at temperatures and pressures pertinent to conditions in the earth's crust.     

Real-time organic aerosol chemical speciation in the indoor environment using extractive electrospray ionization mass spectrometry

Understanding the sources and composition of organic aerosol (OA) in indoor environments requires rapid measurements, since many emissions and processes have short timescales. However, real-time molecular-level OA measurements have not been reported indoors. Here, we present quantitative measurements, at a time resolution of five seconds, of molecular ions corresponding to diverse aerosol-phase species, by applying extractive electrospray ionization mass spectrometry (EESI-MS) to indoor air analysis for the first time, as part of the highly instrumented HOMEChem field study. We demonstrate how the complex spectra of EESI-MS are screened in order to extract chemical information and investigate the possibility of interference from gas-phase semivolatile species. During experiments that simulated the Thanksgiving US holiday meal preparation, EESI-MS quantified multiple species, including fatty acids, carbohydrates, siloxanes, and phthalates. Intercomparisons with Aerosol Mass Spectrometer (AMS) and Scanning Mobility Particle Sizer suggest that EESI-MS quantified a large fraction of OA. Comparisons with FIGAERO-CIMS shows similar signal levels and good correlation, with a range of 100 for the relative sensitivities. Comparisons with SV-TAG for phthalates and with SV-TAG and AMS for total siloxanes also show strong correlation. EESI-MS observations can be used with gas-phase measurements to identify co-emitted gas- and aerosol-phase species, and this is demonstrated using complementary gas-phase PTR-MS observations.     

含硫重钙中总硫含量的测定

开发了两步法测定含硫重钙中总硫的方法。用盐酸溶解样品中的硫酸盐,玻璃砂芯坩埚过滤后,滤液用硫酸钡重量法测定硫酸盐含量。滤渣用硫饱和丙酮溶出干扰物质,再以二硫化碳溶出单质硫,通过减量法测定单质硫。结果显示,运用此方法对实验样品多次平行测定的相对标准偏差分别在2.30%～2.81%和1.09%～1.23%,回收率分别在96.8%～102.5%和98.7%～103.0%。     

Insights into charge transition within band structure of amorphous SiCNO ceramic

SiCNO ceramic is prepared by pyrolyzing modified polysilazane. Its microstructure feature, dielectric properties and charge transition mechanisms are studied based on the analysis of effects of pyrolysis temperature on AC electrical performance. The Tauc band and the energy states density at Fermi level are studied by ultraviolet absorption and dielectric tests. The charge transition in the silicon-based matrix was analyzed according to Jonscher's dielectric relaxation theory. Results show that SiCNO ceramic obtained at 1000–1300?°C is amorphous with chemical stability. Three types of charge transition, that is, excitation from deep traps into the delocalized bands and the corresponding reverse capture processes, hopping near the Fermi level, and localized hopping of an electron in a potential double well, are enhanced as annealing temperature increases, which occur within energy band of Si-based matrix.     

液相沉淀-煅烧法制备大粒径球形四氧化三钴

以硫酸钴为原料,碳酸氢铵为沉淀剂,采用液相沉淀法合成了大粒径球形碳酸钴,考察了不同晶种量、pH和硫酸钴溶液流量对碳酸钴形貌、粒度分布、振实密度和硫元素质量分数的影响,并探究了碳酸钴的生长机理。通过分步煅烧,并设置不同升温时间使碳酸钴热分解,得出优化四氧化三钴理化指标的煅烧条件。结果表明,当晶种量为2 kg,pH在7.2～7.5,硫酸钴溶液流量为500 mL/h时,采用分段式热分解碳酸钴,各温区按统一时间(60 min)升温,所得四氧化三钴形貌为球形,中值粒径为16.52μm,振实密度达2.26 g/cm3。