Thermal properties of hierarchical YSZ and LZO ceramic microspheres with multi-scaled voids investigated by using theoretical,experimental and simulation methods

Heat transfer within ceramic feedstock powders is still unclear, which impedes optimization of the thermal and mechanical properties of the thermal sprayed coatings. The microspheres (yttria-stabilized zirconia YSZ and lanthanum zirconate LZO) were prepared via the electro-spraying assisted phase inversion method (ESP). The thermal properties of the two ESP microspheres and a commercial hollow spherical powder (HOSP) were investigated by using theoretical, experimental, and simulation methods. Thermal conductivity of the single microsphere was estimated via a novel nest model that was derived from the Maxwell-Eucken 1 and the EMT model. Thermal conductivity of a single YSZ/LZO-ESP microsphere prepared at 1100–1200 °C was within 0.36–0.75 W/m K, which was ～ 20 % lower than that of a single YSZ-HOSP microsphere with a similar porosity. Heat flux simulation showed that high tortuosity around the multi-scaled voids of the ESP microsphere led to a more efficient decrease in thermal conductivity compared with total porosity.     

Preparation of magnetic zeolite/chitosan composite using silane as modifier for adsorption of Cr(VI) from aqueous solutions

This study aimed to prepare an efficient, cost-effective, and separable magnetic zeolite/chitosan composite (MZFA/CS) adsorbent from solid waste to deal with the water pollution of Cr(VI). The MZFA/CS was characterized by X-ray fluorescence (XRF), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and vibrating sample magnetometer (VSM) techniques. Then, the effect of pH, temperature, initial concentration of Cr(VI) ions, and contact time was considered in the study. For a sorbent dose of 0.1 g in 50 mL of a Cr(VI) solution, at a contact time of 30 min, temperature of 30°C, and a pH of 3, an adsorption capacity (q_e) of 16.96 mg g⁻¹ was achieved. Adsorption kinetics and isotherm data obtained for all adsorption systems were well-fitted by pseudo-second-order and Langmuir models, respectively. The thermodynamic study suggested that the adsorption process is spontaneous and endothermic in nature. In summary, the adsorbent with better separability (Ms = 16.83 emu g⁻¹) and adsorbability was successfully fabricated.     

ZSM-5沸石膜用于生物油的脱水分离及其再生过程研究

在水热条件下通过无模板剂法合成了连续的ZSM-5沸石膜，并将其用于生物油的渗透汽化以进行高效脱水分离。ZSM-5沸石膜在强酸性、多组分的生物油体系中保持了很好的化学稳定性和优异的分离选择性，但在分离过程中面临着较强的膜污染问题，导致了膜通量的大幅下降。ZSM-5沸石膜的再生研究表明，膜的渗透通量随着再生温度的升高而逐渐提高。当再生温度为220℃时，ZSM-5沸石膜的渗透通量可以恢复至初始的88%。再生的机理研究表明，ZSM-5沸石膜中大量的晶内孔在生物油体系中极易被污染，从而导致渗透通量迅速下降；而相对较大的晶间孔却难以被完全堵塞，水分子在被污染的ZSM-5沸石膜中主要通过晶间孔进行渗透。上述结果表明，通过合理调控ZSM-5沸石膜的晶间孔的数量和尺寸大小可有效提升ZSM-5沸石膜在生物油中的渗透汽化脱水分离性能。     

Novel core-shell-like Ni-supported hierarchical beta zeolite catalysts on bioethanol steam reforming

Hierarchical-Beta zeolites have been hydrothermally synthesized by adding a new gemini organic surfactant. The used gemini surfactant play the role of a “pore-forming agents” on the mesoscale, on the same time, providing alkaline environment for the system. With this hierarchical Beta zeolite as the core support, we successfully prepared a shell layer of Ni-containing (22 wt%) petal-like core-shell-like catalyst and applied it to bioethanol steam reforming. At the reaction temperature of 350 °C–550 °C, the conversion rate of ethanol and the selectivity of hydrogen were always above 85% and 70%. After reaction of 100 h on stream at 400 °C, there were not obvious inactivation could be observed on NiNPs/OH-MBeta catalyst.     

SBA-15固载磷钨酸催化剂的制备及催化合成叔丁基苯酚

以不同硅烷偶联剂改性的介孔分子筛SBA-15为载体、PW_(12)为催化剂,通过对SBA-15表面共价及非共价修饰制备磷钨酸@介孔分子筛/硅烷偶联剂复合催化剂PW_(12)@SBA-15/YSiX_3(YSiX_3=Apts、Atapts、Papts);并利用FT-IR、XRD、TEM、N_2吸附-脱附对其组成、结构及形貌进行表征。以改性SBA-15分子筛固载磷钨酸催化剂催化合成叔丁基苯酚为研究对象,考察不同硅烷偶联剂、反应温度、苯酚与叔丁醇物质的量比对催化合成叔丁基苯酚的影响,并获得合成叔丁基苯酚的最佳工艺条件,即反应温度145℃、n(苯酚)∶n(叔丁醇)=1∶2.5、重时空速2.2 h~(-1),该最佳反应条件下,PW_(12)@SBA-15/Apts催化剂催化合成叔丁基苯酚的催化活性最高,苯酚转化率为98.3%,2,4-二叔丁基苯酚选择性为57.3%.     

Enhanced compactness of oriented MFI zeolite films by heat treatment of seed layer

The achievement of compact and defect-free film structure is crucial for the application of b-oriented MFI zeolite film. In this work, a novel heat treatment technique was used to treat zeolite seeded substrates prior to secondary growth. The influence of the heat treatment parameters such as treat temperature and time on the final film morphology were systematically investigated. The relationship between film compactness and the parameters was established. Under the optimized treat temperature of 120?°C and treat time of 1?h, compact and uniform b-oriented MFI zeolite film was achieved. The applicability of the optimum heat treatment condition was validated by employing various film substrates.     

Structure,stability and permeation properties of NaA zeolite membranes for H2O/H2 and CH3OH/H2 separations

NaA zeolite membranes were synthesised in the secondary growth hydrothermal method based on the seeding of the inner surface of a ceramic α-alumina tube. The impacts of crystallisation time and zeolite precursor concentration (in H₂O) were investigated. The structure and stability of the prepared NaA zeolite membranes were also investigated with operating temperatures, times and pressures. The results indicate that the optimal synthesis gel molar composition was 3Na₂O: 2SiO₂: Al₂O₃: 200H₂O. This led to cubic-shaped NaA zeolite which showed good stability. The optimal NaA zeolite membrane had H₂O and CH₃OH fluxes of 2.77 and 0.19 kg/m²h, with H₂O/H₂ and CH₃OH/H₂ separation factors of ∞ and 0.09 at a temperature of 30 °C. The NaA zeolite membrane had high thermal stability, but poor separation performance at high temperature (240 °C). The results suggested that the H₂ permeation flux is significantly influenced by preferential adsorption of vapour in the NaA zeolite membrane.     

Fucoxanthin,a Marine-Derived Carotenoid from Brown Seaweeds and Microalgae: A Promising Bioactive Compound for Cancer Therapy

Fucoxanthin is a well-known carotenoid of the xanthophyll family, mainly produced by marine organisms such as the macroalgae of the fucus genus or microalgae such as Phaeodactylum tricornutum. Fucoxanthin has antioxidant and anti-inflammatory properties but also several anticancer effects. Fucoxanthin induces cell growth arrest, apoptosis, and/or autophagy in several cancer cell lines as well as in animal models of cancer. Fucoxanthin treatment leads to the inhibition of metastasis-related migration, invasion, epithelial–mesenchymal transition, and angiogenesis. Fucoxanthin also affects the DNA repair pathways, which could be involved in the resistance phenotype of tumor cells. Moreover, combined treatments of fucoxanthin, or its metabolite fucoxanthinol, with usual anticancer treatments can support conventional therapeutic strategies by reducing drug resistance. This review focuses on the current knowledge of fucoxanthin with its potential anticancer properties, showing that fucoxanthin could be a promising compound for cancer therapy by acting on most of the classical hallmarks of tumor cells.     

多级孔HZSM-5分子筛催化快速热解生物质制芳烃

采用酸和/或碱处理法制备了一系列多级孔HZSM-5分子筛，采用XRD、N₂吸附、XRF、TEM、²⁷Al MAS NMR和NH₃-TPD等表征手段对其孔道结构和酸性进行表征。表征结果表明，采用碱处理方法，可获得孔径集中于3~6 nm的介孔结构，通过改变酸、碱处理次序，可调变酸中心数量和强酸/总酸中心比例。在Py-GC/MS装置上，以纤维素和水稻秸秆为原料，研究多级孔分子筛结构对催化快速热解（CFP）制芳烃反应的影响。反应评价结果表明，同商品级HZSM-5相比，采用先碱后酸处理获得的多级孔HZSM-5分子筛（HZ-OH/H），可将纤维素CFP芳烃碳产率由32.3%提高至43.6%，可将水稻秸秆CFP芳烃碳产率由23.0%提高至30.8%。多级孔HZ-OH/H分子筛的孔道结构和酸中心分布特征，对开发应用于生物质制芳烃的高效工业催化剂具有借鉴意义。