Swapping catalytic active sites from cationic Ni to anionic F in Fe–F–Ni3S2 enables more efficient alkaline oxygen evolution reaction and urea oxidation reaction

Electrolysis of water for producing hydrogen instead of traditional fossil fuels is one of the most promising methods to alleviate environmental pollution and energy crisis. In this work, Fe and F ion co-doped Ni₃S₂ nanoarrays grown on Ni foam substrate were prepared by typical hydrothermal and sulfuration processes for the first time. Density functional theory (DFT) calculation demonstrate that the adsorption energy of the material to water is greatly enhanced due to the doping of F and Fe, which is conducive to the formation of intermediate species and the improvement of electrochemical performance of the electrode. The adsorption energy of anions (F and S) and cations (Fe and Ni) to water in each material was also calculated, and the results showed that F ion showed the most optimal adsorption energy of water, which proved that the doping of F and Fe was beneficial to improve the electrochemical performance of the electrode. It is worth noting that the surface of Fe–F–Ni₃S₂ material will undergo reconstruction during the process of water oxidation reaction and urea oxidation reaction, and amorphous oxides or hydroxides in situ would be formed on the surface of electrode, which are the real active species.     

Ni–Cr alloys for effectively enhancing hydrogen evolution processes in phosphate-buffered neutral electrolytes

Significant efforts have been made to develop highly active non-noble metal-based, affordable metallic and stable electro-catalysts for hydrogen evolution reaction (HER). Strong acid and bases are now used in HER operations to achieve large-scale, sustained H₂ fuel production. However, few studies have utilized phosphate-buffered neutral electrolytes (PBS) in the field of neutral electrolyte technology. In this work, a certain alloys with a Ni–Cr basis have been produced as favorable components for the HER under neutral conditions. Additionally, the current investigations are emphasizing on the concentration of buffer phosphate species in the HER activity of various materials. By employing polarization and electrochemical impedance spectroscopy (EIS) in neutral solutions, the electro-catalytic activity of new alloys on HER was evaluated. According to the preliminary findings, the examined Ni–Cr-based alloys show superior HER catalytic activity in neutral electrolytes. Additionally, the Ni–Cr alloy matrix with Fe and Mo added enhances HER electrocatalytic efficiency while lowering interfacial charge transfer resistance. Due to its low overpotential of ?297 mV @ 10 mA cm^?2 and Tafel slope of 94 mV dec^?1 in 1.0 M PBS media, the Ni–Cr–Mo–Fe alloy exhibits an efficient HER, suggesting that the Ni–Cr–Mo–Fe electrode will be a potential noble metal-free electro-catalyst for HER. The Ni–Cr–Mo–Fe cathode is a readily available and affordable material for the production of HER in neutral medium.     

Transition metal atoms anchored on nitrogen-doped α-arsenene as efficient electrocatalysts for nitrogen electroreduction reaction

Electrocatalytic reduction of N₂ to NH₃ under ambient conditions, inspired by biological nitrogen fixation, is a new approach to address the current energy shortage crisis. As a result, developing efficient and low-cost catalysts is critical. The catalytic activity, catalytic mechanism, and selectivity of α-arsenene (α-Ars) catalysts anchored with various transition metal atoms and doped with different numbers of N atom were investigated for N₂ reduction reaction (NRR) in this paper. Results reveal that compared with WN₃-α-Ars which is coordinated with three N atoms, asym-WN₂As-α-Ars that coordinated with two N atoms not only exhibits high catalytic activity (U_L = ?0.36 V), but can also successfully suppress the hydrogen evolution reaction (HER). It is manifested that reducing the number of coordination atoms can promote the selectivity of the transition metal (TM) loaded N-doped arsenene catalysts. Furthermore, activity origin analyses show both the charge on 1N–NH and φ form volcano-type relationship with the limiting potential. The active center of the catalyst, which acts as the charge transporter and has the moderate ability to retrieve charges, is the most efficient in NRR. Overall, this research creates high performance NRR catalysts by varying the number of coordinating N atoms, which provides a novel idea for the development of new NRR catalysts.     

Bimetallic platinum–ruthenium nanoparticles immobilized on reduced graphene oxide-TiO2 (RGO-TiO2) support for ethanol electro oxidation in acidic media

The present work addresses the potentialities of Pt–Ru nanoparticles deposited on a graphene oxide (RGO) and TiO₂ composite support towards electrochemical oxidation of ethanol in acidic media relevant for fuel cell applications. To immobilize platinum–ruthenium bimetallic nanoparticles on to an RGO-TiO₂ nanohybrid support a simple solution-phase chemical reduction method is utilized. An examination using electron microscopy and energy dispersive X-ray spectroscopy (EDS) indicated that Pt–Ru particles of 4–8 nm in diameter are dispersed on RGO-TiO₂ composite support. The corresponding Pt–Ru/RGO-TiO₂ nanocomposite electrocatalyst was studied for the electrochemical oxidation of ethanol in acidic media. Compared to the commercial Pt–Ru/C and Pt/C catalysts, Pt–Ru/RGO-TiO₂ nanocomposite yields higher mass-specific activity of about 1.4 and 3.2 times, respectively towards ethanol oxidation reaction (EOR). The synergistic boosting provided by RGO-TiO₂ composite support and Pt–Ru ensemble together contributed to the observed higher EOR activity and stability to Pt–Ru/RGO-TiO₂ nanocomposite compared with other in-house synthesized Pt–Ru/RGO, Pt/RGO and commercial Pt–Ru/C and Pt/C electrocatalysts. Further optimization of RGO-TiO₂ composite support provides opportunity to deposit many other types of metallic nanoparticles onto it for fuel cell electrocatalysis applications.     

Trimetallic NiFeCr-LDH/MoS2composites as novel electrocatalyst for OER

The development of efficient and stable oxygen evolution reaction (OER) catalysts is an ongoing challenge. In order to solve the problem of low oxygen evolution efficiency of the current OER catalysts, a novel material was synthesized by the incorporation of NiFeCr-LDH and MoS₂, and its structural and electrochemical properties were also investigated. The introduction of MoS₂ improves the electrochemical performance of NiFeCr-LDH. The polarization curve shows that the potential of composite material is only 1.50 V at a current density of 10 mA cm^?2, which is far superior to commercial precious metal catalysts. In addition, the stability experiment shows that the composite material has excellent stability, and the current density has little change after 500 cycles. Furthermore, we found that some metal ions, such as Ni, Cr and Mo, exist in the form of high valence on the surface of NiFeCr-LDH@MoS₂, which is also conducive to the occurrence of oxygen evolution reaction.     

Controlled galvanic decoration boosting catalysis: Enhanced glycerol electro-oxidation at Cu/Ni modified macroporous films

We report on glycerol electro-oxidation in alkaline medium at macroporous Ni electrodes decorated with Cu particles. Macroporous Ni film is electrodeposited, using hydrogen bubbles as dynamic templates, atop of a Cu substrate. This film shows good electrocatalytic activity towards glycerol oxidation reaction (GOR). The Ni film is further decorated with Cu via spontaneous deposition from CuSO₄ solution. This is done to enhance the catalytic activity of the film towards GOR. The morphology of the Cu-decorated Ni film is controlled using various additives such as KCl and (NH₄)₂SO₄ which are added to the Cu deposition bath. The as-prepared Cu-decorated Ni films are characterized by electrochemical measurements, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). It is found that these additives have tremendous effects on the morphology and the electrocatalytic activity of the decorating Cu particles.The decorated Ni foam showed superior electrocatalytic activity towards the GOR, as confirmed by the negative shift in the onset oxidation potential (ca. 100 mV) together with an increase in oxidation current that is up to 1.5-fold during the cyclic voltammetry (CV) measurements, compared to the undecorated Ni foam.     

Fabrication and characterization of Ni modified TiO2 electrode as anode material for direct methanol fuel cell

Highly ordered porous titanium dioxide nanotube (TiO₂-NT) surfaces were prepared with anodization method to obtain a larger specific surface area that plays a very important role in methanol oxidation. In this regard, optimum conditions such as various anodization voltages and times were determined. The largest surface area of TiO₂ occurred at anodization voltage and time of 60 V and 2 h, respectively. After obtaining the high specific surface area, very small amounts of Nickel (Ni) nanoparticles were deposited on TiO₂-NT surface and their behaviors of methanol electro-oxidation were investigated by Cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and chronoamperometry (CA) methods. Characterizations of the TiO₂-NT and Ni modified electrodes are exerted by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD). The average tube length and diameter are 36.32 μm and 93.6 nm according to SEM images. XRD results indicated the tetragonal structured anatase of TiO₂ and Ni (111) and (200). While methanol oxidation peak does not observe on TiO₂-NT surface, behaviors of methanol oxidation depend on the Ni content on TiO₂-NT surface. Oxidation response increases by the increasing amount of Ni nano-particles in the deposits. High surface coverage (Γ) with 3.87 × 10⁻⁹ mol cm⁻² and very low activation energy (E_a) with 11.0 kJ/mol are measured on Ni modified TiO₂-NT with the highest Ni content. Charge transfer resistance either reduced or provided long stability and durability with the deposition of Ni on TiO₂-NT. This may associate that TiO₂-NTs with the large surface areas may play a significant role in the methanol oxidation efficiency. Modification of TiO₂-NT surface with Ni particles is an effective plan for high-performance electrocatalysis. Besides, the strong electronic interaction between Ni and TiO₂ may facilitate the adsorption of methanol through the bi-functional mechanism on the electrode surface.     

Nickel foam-supported Fe,Ni-Polyporphyrin microparticles: Efficient bifunctional catalysts for overall water splitting in alkaline media

Developing highly active, stable and sustainable electrocatalysts for overall water splitting is of great importance to generate renewable H₂ for fuel cells. Herein, we report the synthesis of electrocatalytically active, nickel foam-supported, spherical core-shell Fe-poly(tetraphenylporphyrin)/Ni-poly(tetraphenylporphyrin) microparticles (FeTPP@NiTPP/NF). We also show that FeTPP@NiTPP/NF exhibits efficient bifunctional electrocatalytic properties toward both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). Electrochemical tests in KOH solution (1 M) reveal that FeTPP@NiTPP/NF electrocatalyzes the OER with 100 mA cm⁻² at an overpotential of 302 mV and the HER with 10 mA cm⁻² at an overpotential of 170 mV. Notably also, its catalytic performance for OER is better than that of RuO₂, the benchmark OER catalyst. Although its catalytic activity for HER is slightly lower than that of Pt/C (the benchmark HER electrocatalyst), it shows greater stability than the latter during the reaction. The material also exhibits electrocatalytic activity for overall water splitting reaction at a current density of 10 mA cm⁻² with a cell voltage of 1.58 V, along with a good recovery property. Additionally, the work demonstrates a new synthetic strategy to an efficient, noble metal-free-coordinated covalent organic framework (COF)-based, bifunctional electrocatalyst for water splitting.     

P doped CoMoO4/RGO as an efficient hybrid catalyst for hydrogen evolution

Transition metal oxides, as newly earth-abundant and low-cost catalysts, have been regarded as promising materials for electrocatalytic oxygen evolution. However, they are rarely used as an electrocatalyst in hydrogen evolution reaction (HER) due to the poor HER activity. Herein, we present a facile two-step method to synthesize P doped CoMoO₄/RGO (P-CoMoO₄/RGO) with different atomic ratios of Co²⁺/Co³⁺ through a simple phosphorization strategy by changing the mass of NaH₂PO₂. The effective P-doping into CoMoO₄/RGO can modify the electronic properties and modulate the atomic ratio of Co²⁺/Co³⁺, which promotes the electron transfer and creates more activity sites. Therefore, the optimized P-CoMoO₄/RGO with a relatively larger atomic ratio of Co²⁺/Co³⁺ shows superior HER performances in alkaline media, which affords a current density of 10 mA cm⁻² at a small overpotential of 90 mV and a low Tafel slope of 62 mV dec⁻¹ along with having satisfactory long-term stability. This work provides a valuable route to enhance the HER activity of transition metal oxides.     

One-pot synthesis of Pd20-xAux nanoparticles embedded in nitrogen doped graphene as high-performance electrocatalyst toward methanol oxidation

Mixed Pd–Au bimetallic nanoparticles embedded nitrogen doped graphene composites (PdAu/NG180) are explored for efficient electrocatalytic oxidation of methanol. A simple hydrothermal one-pot polyol method, involving simultaneous reduction of both Pd and Au, is utilized for the synthesis of Pd_20-xAu_x/NG180 (x wt % = 0, 5, 10 and 15). This method is of multiple advantages such as inexpensiveness, reagent-free and environment-friendly being surfactant free. The morphology, crystal structure and chemical composition of NG180, Pd/NG180 and Pd_20-xAu_x/NG180 catalysts are analyzed by XRD, FESEM-EDX, TEM, XPS and Raman spectroscopy methods. Electrocatalytic activities of PdAu/NG180 nanocomposites toward methanol oxidation reaction (MOR) in alkaline media are investigated by cyclic voltammetry, chronoamperometry and CO stripping measurements. Pd_20-xAu_x/NG180 exhibited an increase in the electroactive surface area of Pd to twice by the coexistence of Au. In cyclic voltammetry studies, Pd₁₀Au₁₀/NG180 catalyst exhibits highest peak current density for MOR and is 1.5 times highly efficient compared to Pd₂₀/NG180 with an enhanced shift in the onset potential by 140 mV to lower overpotentials. Besides, Pd₁₀Au₁₀/NG180 catalyst exhibited enhanced electroactive surface area and long-time durability in comparison to Pd₂₀/NG180 catalyst. The steady state current density for MOR observed with Pd₁₀Au₁₀/NG180 at the end of 4000 s (98 mA mg⁻¹_Pd) is higher than those observed with all the other catalysts at the end of mere 1000 s alone (97, 61, and 32 mA mg⁻¹_Pd). The promising high electrocatalytic activity of Pd₁₀Au₁₀/NG180 is well corroborated from CO stripping experiments that the specific adsorption of CO onto Pd₁₀Au₁₀/NG180 (0.71 C m⁻²) is merely half to that observed onto Pd₂₀/NG180 (1.49 C m⁻²).