Influence of mesoporous phosphotungstic acid on the physicochemical properties and performance of sulfonated poly ether ether ketone in proton exchange membrane fuel cell

This study demonstrates the successful development of hybrid mesoporous siliceous phosphotungstic acid (mPTA-Si) and sulfonated poly ether ether ketone (SPEEK) as a proton exchange membrane with a high performance in hydrogen proton exchange membrane fuel cells (PEMFC). SPEEK acts as a polymeric membrane matrix and mPTA-Si acts as the mechanical reinforcer and proton conducting enhancer. Interestingly, incorporating mPTA-Si did not affect the morphological aspect of SPEEK as dense membrane upon loading the amount of mPTA-Si up to 2.5 wt%. The water uptake reduced to 14% from 21.5% when mPTA-Si content increases from 0.5 to 2.5 wt% respectively. Meanwhile, the proton conductivity increased to 0.01 Scm^?1 with 1.0 wt% mPTA-Si and maximum power density of 180.87 mWcm^?2 which is 200% improvement as compared to pristine SPEEK membrane. The systematic study of hybrid SP-mPTA-Si membrane proved a substantial enhancement in the performance together with further improvement on physicochemical properties of parent SPEEK membrane desirable for the PEMFC application.     

Delivery of cisplatin by folic acid-targeted liposomal nanoparticles into liver cancer cell line

This study aimed to prepare cisplatin-loaded PEGylated liposomal nanoparticles targeted with folic acid and evaluate their efficacy on liver cancer cell line PLC/PRF/5 (Alexander hepatoma cell line). Nanoparticles were prepared by reverse phase evaporation technique and characterized by dynamic light scattering, scanning electron microscopy, transmission electron microscopy, inductively coupled plasma optical emission spectrometry, Fourier transform infrared spectroscopy, and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide techniques. Nanoscale particles with appropriate drug encapsulation efficiency (13%) were prepared. Cytotoxicity results indicated that the superior potency of targeted cisplatin-loaded nanoparticles compared to the nontargeted counterpart with 23% more cytotoxicity. Findings of this study confirmed the potency of targeted PEGylated liposomal nanoparticles.     

抗冲ACR树脂的合成及其性能评价

采用种子乳液聚合法,以丙烯酸丁酯为核层单体、甲基丙烯酸甲酯为壳层单体、甲基丙烯酸烯丙酯为交联剂制备了抗冲ACR树脂。考察了不同加料方式对ACR乳液粒径及对PVC冲击性能的影响,结果表明:连续滴加方式可实现乳液粒径的稳定控制,并能得到性能优异的抗冲ACR树脂。     

盖子环替换及定点突变提高菜豆环氧化物水解酶对邻甲基苯基缩水甘油醚的催化性能

菜豆环氧化物水解酶1和2（PvEH1、PvEH2）能够动力学拆分外消旋邻甲基苯基缩水甘油醚（rac-oMGE），从而保留(R)-oMGE。基于对PvEH1和PvEH2结构的同源模拟和分析，发现二者分子中的盖子环差异较大，故本文选择盖子环作为研究目标。经融合聚合酶链式反应（FPCR），获得了PvEH2的盖子环区域被PvEH1对应区域替换的杂合酶Pv2Pv1。用全细胞酶E. coli/pv2pv1催化rac-oMGE，当(S)-oMGE刚好水解完全时，产物(S)-3-邻甲苯基-1,2-丙二醇（(S)-oTPD）的ee_p由PvEH2的58.3%提高至75.5%。为进一步提高酶的性质，在Pv2Pv1中选取11个氨基酸位点进行丙氨酸(A)突变，获得最优突变子E. coli/pv2pv1^K176A，活性为E. coli/pv2pv1（4.2U/g）的2.1倍，且当S构型的底物刚好完全水解时，(S)-oTPD的ee_p进一步提高为80.3%。分子对接分析发现，盖子环替换和K176位点突变为A，均使(R)-oMGE环氧环中的C_α更易受到酶中D101位点的攻击。利用E. coli/pv2pv1^K176A催化150mmol/L rac-oMGE水解制备(R)-oMGE（ee_s＞99%）和(S)-oTPD（ee_p=80.4%），二者的产率Y_S和Y_P分别为32.7%和60.1%，时空产率STY_S和STY_P为1.6g/(L·h)和3.3g/(L·h)。本实验为改善EH的催化性质提供了一种有效策略。     

Poly(L-lysine)-poly(ethylene glycol) layers with different structure and their influence on silica suspension stability

The effects of the structure of di- and triblock copolymers of poly(L-lysine) – LYS with poly(ethylene glycol) – PEG as well as the length of nonionic fragment in the LYS-PEG macromolecule on the copolymer chains conformation in the adsorption layer formed on the colloidal silica (SiO2) surface were examined. Spectrophotometry and turbidimetry were applied for the determination of copolymer adsorbed amounts and stability coefficients of silica aqueous suspensions. The electrokinetic parameters such as solid surface charge density and zeta potential were also estimated. The adsorption of LYS-PEG was proved to be the highest at pH 10 whereas the lowest adsorption on the solid surface was found for the triblock copolymer with long fragments of LYS at the same pH value.     

In-situ molecular-level hybridization enabling high-sulfonation-degree sulfonated poly(ether ether ketone) membrane with excellent anti-swelling ability and proton conduction

Sulfonated poly(ether ether ketone) (SPEEK) membrane with high sulfonation degree (SD) is a promising substitute of Nafion as proton exchange membrane (PEM), due to the excellent proton conductivity and low cost. However, its widespread application is limited by the inferior structural stability. Here, we report the fabrication of high SD SPEEK membrane with outstanding structural stability through an in-situ molecular-level hybridization method. Concretely, the ionic nanophase of SPEEK membrane is filled with precursors, which are then in-situ converted into polymer quantum dots (PQDs) by a microwave-assisted polycondensation process. In this manner, the micro-phase separation structure of SPEEK membrane is well maintained. PQDs with abundant hydrophilic functional groups together with the inherent –SO₃H groups impart hybrid membrane highly enhanced proton conductivity of 138.2 mS cm⁻¹ at 80 °C, which is comparable to Nafion. This then offers a 116.3% enhancement in device output power. Meanwhile, PQDs act as cross-linkers via generated electrostatic interactions with SPEEK, affording hybrid membrane with SD of 94.1% an ultralow swelling ratio of 1.35% at 25 °C, about 35 times lower than control membrane. More importantly, the in-situ molecular-level hybridization method is versatile, which can also boost the performances of chitosan (CS)-based membranes.     

Psychrophilic hydrogen production from petrochemical wastewater via anaerobic sequencing batch reactor: techno-economic assessment and kinetic modelling

Independent hydrogen production from petrochemical wastewater containing mono-ethylene glycol (MEG) via anaerobic sequencing batch reactor (ASBR) was extensively assessed under psychrophilic conditions (15–25 °C). A lab-scale ASBR was operated at pH of 5.50, and different organic loading rates (OLR) of 1.00, 1.67, 2.67, and 4.00 gCOD/L/d. The hydrogen yield (HY) progressed from 134.32 ± 10.79 to 189.09 ± 22.35 mL/gMEG_initial at increasing OLR from 1.00 to 4.00 gCOD/L/d. The maximum hydrogen content of 47.44 ± 3.60% was achieved at OLR of 4.0 gCOD/L/d, while methane content remained low (17.76 ± 1.27% at OLR of 1.0 gCOD/L/d). Kinetic studies using four different mathematical models were conducted to describe the ASBR performance. Furthermore, two batch-mode experiments were performed to optimize the nitrogen supplementation as a nutrient (C/N ratio), and assess the impact of salinity (as gNaCl/L) on hydrogen production. HY substantially dropped from 62.77 ± 4.09 to 6.02 ± 0.39 mL/gMEG_initial when C/N ratio was increased from 28.5 to 114.0. Besides, the results revealed that salinity up to 10.0 gNaCl/L has a relatively low inhibitory impact on hydrogen production. Eventually, the cost/benefit analysis showed that environmental and energy recovery revenues from ASBR were optimized at OLR of 4.0 gCOD/L/d (payback period of 7.13 yrs).     

离子液体催化合成双烷基二苯醚

以盐酸三乙胺/三氯化铝(Et_3NHCl-AlCl_3)离子液体为催化剂,二苯醚和1-十二烯烃为原料合成了双烷基二苯醚。通过正交试验,得到烷基化反应的较优工艺条件为:n(二苯醚):n(1-十二烯烃)=1:3,二苯醚用量0.3 mol,催化剂用量0.045 mol,反应温度70℃,反应时间1 h。在此条件下,烷基化转化率为98.1%,双烷基二苯醚选择性为33.7%。改变离子液体的阳离子和阴离子部分结构,研究了催化剂结构对其催化性能的影响。结果表明,该类催化剂的催化活性主要由阴离子部分的结构决定,较优的阴阳离子组合为Et_3NHCl-AlCl_3。     

Controlled release of fluorouracil (5-FU) from chitosan-co-poly(ethylene glycol)/ poly(glycerol sebacate)-co-poly(ethylene glycol)-coated iron oxide

A blend of polyglycerol sebacate-poly ethylene glygol/chitosan-poly ethylene glycol-coated iron oxide (PGS-PEG/CS-PEG@Fe₃O₄) nanoparticles for 5FU delivery was prepared by reverse ultrasonic emulsification method. To enhance polymers’ solubility, PEG was grafted. Chemical characterization was performed through Fourier transformed infrared and proton nuclear magnetic resonance spectra. In vitro assay revealed that release profile of 5FU-loaded PGS-PEG/CS-PEG@Fe₃O₄ is sustained. Moreover, cytotoxicity was analyzed on HT29 cell line at the presence of external magnetic field using the lactate dehydrogenase and Alamar Blue. Results illustrate that (PGS-PEG/CS-PEG@Fe₃O₄) is promising to use as a carrier for 5FU anticancer agent with sustained tailored release.     

含氟无皂乳液P(CTFE-IBVE-SUA)的合成及性能研究

通过无皂乳液聚合法制备得到聚(三氟氯乙烯-乙烯基异丁基醚-十一烯酸钠)[P(CTFE-IBVE-SUA)]含氟乳液。考察了单体配比对聚合反应的影响,研究了SUA用量对乳液及聚合物性能的影响,并对聚合物的结构及乳胶粒的形貌进行了测定。结果表明:含氟无皂乳液P(CTFE-IBVE-SUA)的稳定性好、粒径分布均匀;改变单体配比中IBVE和CTFE的比例可以得到不同结构的含氟聚合物乳液;SUA用量对乳液的稳定性、乳胶粒的粒径大小及粒径分布、聚合物膜与水的接触角都有很大的影响;制得的乳液具有明显的核壳结构。