Fully solution-processed and multilayer blue organic light-emitting diodes based on efficient small molecule emissive layer and intergrated interlayer optimization

Efficient and fully solution-processed blue organic light-emitting diodes (OLEDs) based on fluorescent small-molecule and methanol/water soluble conjugated polymer as electron-injection material are reported. The emitting layer is 3,6-bis(9,9,9′,9′-tetrakis (6-(9H-carbazol-9-yl)hexyl)-9H,9′H-[2,2′-bifluoren]-7-yl)dib-nzo[b, d]thiophene 5, 5-dioxide (OCSoC) with a blue-fluorescent small-molecule, and a methanol/water soluble polymer poly[(9,9-bis(30-(N,N-dimethylamino)propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctyl-fluorene)] (PFN) acted as electron-injection layer (EIL). All the organic layers are spin-coated from solution. The multilayer device structure with emitting layer/electron-injection layer is achieved by solution-processed method without the dissolution problem between layers. The performances of the devices show that the maximum luminous efficiency of the multilayer device is increased about 43%, compared to the single-layer device. PFN acting as the EIL material plays a key role in the improvement of the device performance when used in solution-processed small-molecule OLEDs.     

Evidence of nano-galvanic couple formation on in-situ formed nano-aluminum amalgam surfaces for passivation-bypassed water splitting

Reaction of Al metal with water is a well-known technique for large scale production of hydrogen. However, this method suffers from kinetic limitations due to formation of a passivation layer on Al, preventing optimal operations. Using high resolution Scanning Kelvin Probe Force Microscopy (SKPFM), we show the origin of formation of 'nano-galvanic couple' on in situ formed nano-aluminum amalgam surfaces in a water splitting system; passivation based limitations are completely bypassed in this approach. Furthermore, they offer an opportunity to beneficiate and recover mercury in contaminated water. The nano-galvanic corrosion due to substantial lateral variation in surface contact potential is responsible for the observed high throughput of hydrogen production (720 mL/min per 0.5 g Al salt). It may be noted that this process fares better than in situ prepared nano-Al based hydrogen production, wherein 600 mL/min of hydrogen is obtained for 0.5 g Al salt. Investigations using Cyclic Voltammetry (CV) and Electrochemical Impedance Spectroscopy (EIS) provide evidence for passivation-bypassed hydrolysis and favourable kinetics for in situ derived nano-AlHg hydrolytic agents (when compared to nano-Al). This study, to the best of our knowledge, reports the first direct proof of nano-galvanic couple formation on in-situ prepared nanoaluminum amalgam surface; paving a direct way to overcome the long standing passivation problem in Al hydrolysis. It is found that the hydrogen production rate and standard deviation (SD) of the contact potential of nanoaluminum amalgam are directly related to the rate of addition of the reducing agent, offering an opportunity for kinetic control for the in situ hydrolytic process.     

丙型肝炎病毒RNA室内质控品的制备及其临床应用评估

目的探讨自制丙型肝炎病毒(hepatitis C Virus,HCV)RNA定量检测室内质控品的可行性,并评估其临床应用价值。方法收集已发过HCV-RNA临床报告的血浆样本,分别将HCV-RNA阴性血浆(<50 IU/mL)、弱阳性血浆(102~103 IU/mL)和强阳性血浆(105~106 IU/mL)混合、离心后,获得阴性质控品(HCV-RNA-N)、弱阳性质控品(HCV-RNA-L)和强阳性质控品(HCV-RNA-H),小量分装后于-80℃冻存。确定靶值后,评价其均一性、重复性、准确性和稳定性。结果自制HCV RNA室内质控品具有良好的均一性、重复性和准确性,可在-80℃保持稳定至少12个月。结论HCV RNA室内质控品制备过程简单,样品均一,重复性好,准确性高,稳定性良好,可用于临床检测HCV-RNA。     

Experimental investigation of aerodynamic effects of probe on heat transfer from hot-wire sensors at vertical and horizontal orientations

Aerodynamic effects due to hot-wire anemometer (HWA) probe directly influence heat transfer from the probe sensor and result in reduced accuracy in two-dimensional measurements. This experimental research investigates the aerodynamic effects for hot-wire sensors through the study of some important factors such as probe geometry, flow scheme (velocity and direction) and orientation of the probe relative to the flow direction. In addition, flow velocity field between the prongs of a 10:1 model of a single normal probe is explored at different velocities and yaw angles, both at vertical and horizontal orientations of the probe. Results indicate that in vertical orientation, heat transfer from the sensors is always higher than horizontal orientation. Moreover, the aerodynamic effects cause a velocity increase of up to 6% in the vicinity of the sensor. In addition, the presence of the sensor in the flow, generates low-velocity field in the flow wake and a minor rotation of the flow in the vicinity of the sensor, which result in reduced heat transfer from the sensor in horizontal orientation compared to the vertical orientation.     

Green synthesis of yellow emitting PMMA–CdSe/ZnS quantum dots nanophosphors

We herein report the fabrication of highly fluorescent yellow emitting nanophosphors using CdSe/ZnS quantum dots (QDs) dispersed in polymethyl methacrylate (PMMA). The QDs were synthesised via a simple, non-phosphine and one pot synthetic method in the absence of an inert atmosphere. The as-prepared nanocrystallites were characterised by Fourier transform infrared spectroscopy (FTIR), ultraviolet–visible (UV–vis) and photoluminescence spectroscopy, energy-dispersive spectroscopy (EDS), Raman spectroscopy, transmission electron microscopy (TEM) and high resolution TEM (HRTEM) microscopy. Optical analysis confirmed that the as-synthesised CdSe/ZnS QDs were of high quality with sharp absorption peaks, bright luminescence, narrow emission width and high PL quantum yield (up to 74%). The electron microscope images showed that the QDs are small and spherical in shape with narrow size distributions while the HRTEM micrograph confirmed the high crystallinity of the material. The Raman analysis of the QDs revealed the formation of core–shell structure and the energy dispersive spectroscopy confirmed the presence of the corresponding elements (i.e., Cd, Se, Zn and S). The dispersion of the core–shell QDs in PMMA matrix led to the red-shifting of the emission position from 393 nm in the neat PMMA to 592 nm in the nanocomposite. The fabricated highly fluorescent yellow emitting PMMA–CdSe/ZnS core–shell QDs polymer nanocomposite film display excellent optical properties without loss of luminescence. Furthermore, the as-synthesised organic soluble CdSe/ZnS QDs were successfully converted into highly water soluble QDs after ligand exchange with mercaptoundecanoic acid (MUA) without the loss of their emission properties. The simplicity of the method and the quality of the as-synthesised nanocomposite make it a promising material for the large scale fabrication of diverse optical devices.     

Combined advanced oxidation and biodegradation of industrial effluents from the production of stilbene-based fluorescent whitening agents

Three different industrial wastewaters from the production of stilbene-based fluorescent whitening agents were investigated with regard to the applicability of advanced oxidation processes combined with biodegradation. Oxidation processes included the application of ozone, hydrogen peroxide, UV-radiation and Fenton's reagent (Fe(2+)/H(2)O(2)). Characterization of the combined chemical-biological treatment was done by sum parameters and HPLC analysis. In addition, toxicity was determined using the luminescence inhibition test. Results showed that processes producing OH-radicals without the need of UV-irradiation proved to be suited for the oxidation of all three wastewaters. H(2)O(2)/UV processes were ineffective due to the high inner filter effect of the effluents. Comparing the combined oxidative-biological process with biological treatment, the applied pre-oxidation steps did not always lead to a significant improvement of the biological degradation. In one case, an inverted treatment starting with biodegradation followed by oxidation turned out to be the preferable procedure. After oxidation with ozone or ozone combined with UV-irradiation, an increase in toxicity was partly observed indicating the formation of toxic intermediate products. In some cases samples had to be diluted before the biodegradation step to achieve a better biodegradability.     

Floc-based sequential partial nitritation and anammox at full scale with contrasting N2O emissions

New Activated Sludge (NAS^®) is a hybrid, floc-based nitrogen removal process without carbon addition, based on the control of sludge retention times (SRT) and dissolved oxygen (DO) levels. The aim of this study was to examine the performance of a retrofitted four-stage NAS^® plant, including on-line measurements of greenhouse gas emissions (N₂O and CH₄). The plant treated anaerobically digested industrial wastewater, containing 264 mg N L⁻¹, 1154 mg chemical oxygen demand (COD) L⁻¹ and an inorganic carbon alkalinity of 34 meq L⁻¹. The batch-fed partial nitritation step received an overall nitrogen loading rate of 0.18-0.22 kg N m⁻³ d⁻¹, thereby oxidized nitrogen to nitrite (45-47%) and some nitrate (13-15%), but also to N₂O (5.1-6.6%). This was achieved at a SRT of 1.7 d and DO around 1.0 mg O₂ L⁻¹. Subsequently, anammox, denitrification and nitrification compartments were followed by a final settler, at an overall SRT of 46 d. None of the latter three reactors emitted N₂O. In the anammox step, 0.26 kg N m⁻³ d⁻¹ was removed, with an estimated contribution of 71% by the genus Kuenenia, which constituted 3.1% of the biomass. Overall, a nitrogen removal efficiency of 95% was obtained, yielding a dischargeable effluent. Retrofitting floc-based nitrification/denitrification with carbon addition to NAS^® allowed to save 40% of the operational wastewater treatment costs. Yet, a decrease of the N₂O emissions by about 50% is necessary in order to obtain a CO₂ neutral footprint. The impact of emitted CH₄ was 20 times lower.     

Exploration of the two‐photon excitation spectrum of fluorescent dyes at wavelengths below the range of the Ti:Sapphire laser

We have studied the wavelength dependence of the two‐photon excitation efficiency for a number of common UV excitable fluorescent dyes; the nuclear stains DAPI, Hoechst and SYTOX Green, chitin‐ and cellulose‐staining dye Calcofluor White and Alexa Fluor 350, in the visible and near‐infrared wavelength range (540–800 nm). For several of the dyes, we observe a substantial increase in the fluorescence emission intensity for shorter excitation wavelengths than the 680 nm which is the shortest wavelength usually available for two‐photon microscopy. We also find that although the rate of photo‐bleaching increases at shorter wavelengths, it is still possible to acquire many images with higher fluorescence intensity. This is particularly useful for applications where the aim is to image the structure, rather than monitoring changes in emission intensity over extended periods of time. We measure the excitation spectrum when the dyes are used to stain biological specimens to get a more accurate representation of the spectrum of the dye in a cell environment as compared to solution‐based measurements.     

聚乙烯管道元件的超声检测

采用多种探头组合对聚乙烯管件声学特性进行研究。通过对比试验得出检测大厚度聚乙烯管件的最优检测参数,并提出改进探头的思路。大量的检测试验和现场车削破坏性试验对比显示,无论是缺陷检出率还是定位和定量精度都比较高。     

Rapid detection method for aflatoxin B1 in soybean sauce based on fluorescent microspheres probe

Soybean sauce, a Chinese traditional and daily condiment, is often contaminated by aflatoxin B₁. An extract-free immunochromatographic assay was proposed based on fluorescent microspheres probe for the' detection of aflatoxin B₁ in soybean sauce. The probe was prepared by coupling fluorescent microspheres with anti-aflatoxin B₁ antibody by the 1-ethyl-3(3-dimethylaminopropyl) carbodiimides hydrochloride-mediated method. The background from the soybean sauce sample on strip was eliminated because of the optical property of the probe. The sample without extracting procedure was directly detected by diluting with 10% methanol solution. The visible detection limit for the qualitative analysis of aflatoxin B₁ in the proposed method was 2.5 μg/L, which was lower than the maximum level of 5 μg/L set by the Chinese government. The results were well agreed with those obtained by liquid chromatography-mass spectrometry (LC-MS). The method showed satisfactory characteristics, such as rapid detection, easy operation, and high sensitivity, and can thus be applied for the large-scale and on-site screening of soybean sauce contaminated with aflatoxin B₁. To our knowledge, this report is the first one on the qualitative detection of aflatoxin B₁ in dark colored food samples directly by fluorescent microspheres probe-based immunochromatography.