PLA-g-GMA的制备及其对PLA/PPC共混体系性能的影响

采用双螺杆挤出机将甲基丙烯酸缩水甘油酯(GMA)接枝到聚乳酸(PLA)上,而后将接枝产物(PLA-g-GMA)与聚乳酸(PLA)、聚碳酸亚丙酯(PPC)反应性共混,考察了接枝物中GMA加入量变化对PLA/PPC/PLA-g-GMA共混体系的力学性能、热稳定性能的影响,并对共混体系的断裂机理进行了研究。结果表明,PLA-g-GMA的引入能够在一定程度上改善PLA与PPC的相容性。随着接枝物中GMA加入量的增加,共混物的冲击强度、断裂伸长率及拉伸强度均呈现出先升高后降低的趋势,并在接枝物中GMA加入量为3%时达到最大值。扫描电镜结果显示,PLA-g-GMA引入后共混物的韧性断裂特征越发显著,其冲击断裂方式由脆性断裂过渡为韧性断裂。热失重分析结果显示,加入PLA-g-GMA后共混物的起始分解温度和完全分解温度均有一定程度的提高。     

A systematic study of maghemite/PMMA nano-fibrous composite via an electrospinning process: Synthesis and characterization

In this study, maghemite/PMMA nano-fibrous composites have been successfully fabricated by using the electrospinning process. PMMA nano-fibres have been selected to be used as the matrix; the PMMA was dissolved in three diverse solvents (Acetone, THF and DMF) in order to obtain fine PMMA nano-fibres. As a result, the PMMA–DMF proved to be the most appropriate polymer solution among the three solvents, with its impressive defect-free surface morphology results. The production of maghemite using Massart’s procedure resulted in nano-particles with an average diameter of 4.98 ± 0.13 nm (using transmission electron microscopy (TEM)). Maghemite nano-particle were then mixed with a prepared polymer solution in order to fabricate maghemite/PMMA nano-fibrous composite. Furthermore, the investigation of the morphology and structure of the composite was carried out using field emission scanning electron microscopy (FESEM), Energy-dispersion X-ray spectroscopy (EDX), Alternating Gradient Magnetometer (AGM), Fourier transform infrared spectrometer (FTIR), X-ray diffraction (XRD) and tensile strength measurement devices. The results indicated that there was a great amount of maghemite, both in and on the composite’s surface, which can be utilized in the purpose of magnetic applications.     

甲基丙烯酸甲酯/丙烯酸丁酯的无皂乳液共聚

以甲基丙烯酸甲酯(MMA)和丙烯酸丁酯(BA)为主要原料,过硫酸铵为引发剂,进行无皂乳液聚合.结果表明:在不添加乳化剂的情况下,当MMA/BA=1:1、引发剂用量为0.24%、反应温度为80℃、反应时间8.0h时,所得乳液最稳定,单体转化率为81.84%,此无皂乳液对牛皮纸的粘接性比常规乳液好.     

MMA-EA-DM三元共聚胶乳的制备及共聚物表征

以 ( NH4) 2 S2 O8-Na2 SO3 为氧化还原引发体系 ,用种子与无种子半连续乳液聚合两种方法 ,于4 5～ 6 5℃ ,进行甲基丙烯酸甲酯 ( MMA) -丙烯酸乙酯 ( EA) -甲基丙烯酸二甲胺基乙酯 ( DM)三元乳液共聚合。结果表明采用无种子半连续乳液聚合法所得乳液稳定性好 ,其转化率可达 99% ,共聚物的特性粘数为4 .1 2 dl/ g。对共聚物进行 IR、1 HNMR的研究结果表明由于单体 DM溶于水 ,三元乳液共聚合时 ,基本上合成的是三元共聚物 ,其组成比为 1∶ 1∶ 0 .75 ( mole) ,有极少部分的 DM的均聚物或者是富集 DM的共聚物生成 ,其摩尔百分数为 3.6 %。     

Microfibrillated cellulose as reinforcement for Li-ion battery polymer electrolytes with excellent mechanical stability

Methacrylic-based thermo-set gel-polymer electrolyte membranes obtained by a very easy, fast and reliable free radical photo-polymerisation process and reinforced with microfibrillated cellulose particles are here presented. The morphology of the composite electrolytes is investigated by scanning electron microscopy and their thermal behaviour (characteristic temperatures, degradation temperature) are investigated by thermo-gravimetric analysis and differential scanning calorimetry. The composite membranes prepared exhibit excellent mechanical properties, with a Young's modulus as high as about 80 MPa at ambient temperature. High ionic conductivity (approaching 10⁻³ S cm⁻¹ at 25 °C) and good overall electrochemical performances are maintained, enlightening that such specific approach would make these hybrid organic, cellulose-based composite polymer electrolyte systems a strong contender in the field of thin and flexible lithium based power sources.     

甲基丙烯酸甲酯-N-环己基马来酰亚胺二元共聚物的研究

研究了本体法甲基丙烯酸甲酯-N-环己基马来酰亚胺二元共聚体系的组成对共聚物的光学性能、热性能及力学性能的影响。实验结果表明，当-N-环己基马来酰亚胺用量为甲基丙烯酸甲酯量的2．5％时，共聚物的玻璃化转变温度比纯聚甲基丙烯酸甲酯提高了12．3℃；热分解温度提高了41．1℃；硬度及透明性也均有所提高。     

Influence of reaction parameters on the synthesis of hyperbranched polymers via reversible addition fragmentation chain transfer (RAFT) polymerization

The synthesis of hyperbranched poly(methyl methacrylate) (PMMA) via reversible addition fragmentation chain transfer (RAFT) polymerization was investigated by varying the ratio chain transfer agent (CTA): monomer (methyl methacrylate, MMA): brancher (ethylene glycol dimethyl methacrylate, EGDMA): free radical initiator (AIBN) at various temperatures (50, 55, 60, 65, 70 °C). The rate of polymerization was observed to increase with temperature and concentration in brancher, whilst it was lowered by an increase in chain transfer agent concentration. The molecular weight of the samples increased with the ratios brancher: CTA and monomer: CTA. The polydispersity of the samples increase with conversion, as the level of branching increases. At fixed concentration in brancher, an increase of CTA concentration led to polymers with lower PDI. The variation of enthalpy and entropy relative to the monomer reaction were calculated, and it was observed that an increase in the brancher concentration induced an increase in both and , whilst lower CTA concentrations led to an increase in . The variation in Gibbs energy for the monomer reaction was calculated at 60 °C, and results confirmed the presence of a retardation effect when increasing CTA concentration generally observed in RAFT polymerization.     

Cloud point behavior for poly(isodecyl methacrylate)+supercritical solvents+cosolvent and vapor-liquid behavior for CO<Subscript>2</Subscript>+isodecyl methacrylate systems at high pressure

Experimental cloud-point data of binary and ternary mixtures for poly(isodecyl methacrylate) [P(IDMA)] in supercritical carbon dioxide, dimethyl ether (DME), propane, propylene, butane and 1-butene have been studied experimentally using a high pressure variable volume view cell. These systems show the phase behavior at temperature of 308 K to 473 K and pressure up to 255 MPa. The cloud-point curves for the P(IDMA)+CO₂+isodecyl methacrylate (IDMA) are measured in changes of the pressure-temperature (P-T) slope, and with cosolvent concentrations of 0-60.1 wt%. Also, experimental data of phase behaviors for IDMA in supercritical carbon dioxide is obtained at temperature range of 313.2–393.2 K and pressure range of 5.8–22.03 MPa. The experimental results were modeled with the Peng-Robinson equation of state. The location of the P(IDMA)+CO₂ cloud-point curve shifts to lower temperatures and pressures when DME is added to P(IDMA)+CO₂ solution. The P(IDMA)+C₄ hydrocarbons cloud-point curves are ca. 16.0 MPa lower pressures than the P(IDMA)+C₃ hydrocarbons curves at constant temperature. This article is dedicated to Professor Chul Soo Lee in commemoration of his retirement from Department of Chemical and Biological Engineering of Korea University.     

新抗冲型ACR的合成与研究

采用种子乳液聚合法制备了含有PBA／PMMA＼PS三种组分的丙烯酸醋类抗冲型改性剂ACR，在ACR的幔层结构中引入接枝剂甲基丙烯酸烯丙酯（AIMA）来完善幔层结构，从而实现核一壳之间良好的结合，用红外光谱（FTIR）和差示扫描量热法（DSC）对ACR的组成和结构进行表征。研究结果表明：由PBA＼PMMA＼PS三组分构成的ACR在抗冲击性能上要略优于由简单的PBA＼PMMA构成的ACR，苯乙烯单体（St）最多可以取代大约1／3壳层的甲基丙烯酸甲酯（MMA），甲基丙烯酸烯丙酯（AIMA）的引入对幔层结构的完善起了显著的作用。     

Electrochemical properties of polyethylene membrane modified with sulfonic and phosphonic acid groups

Ion-exchange membranes modified with sulfonic (-SO₃H) and phosphonic acid (-PO₃H) groups were prepared by radiation-induced grafting of glycidyl methacrylate (GMA) onto polyethylene (PE) films and sub-sequent sulfonation and phosphonation of poly(GMA) graft chains. The surface area, thickness and volume of grafted PE film increased with increasing grafting yield. The specific electrical resistance of PE membrane modified with the -PO₃H and -SO₃H groups decreased with increasing the ion-exchange capacity. The PE membrane modified with -PO₃H group had a lower specific electrical resistance than that of PE membrane modified with -SO₃H group.