一种高性能低VOC尼龙6复合材料的研究

通过研究基料、无机填料、增韧剂、润滑剂对尼龙6(PA6)复合材料的物理性能、VOC的影响,得到一种高性能低VOC的PA6复合材料。结果表明:以PA6 IM为基料、滑石粉为无机填料、EPDM 3092M为增韧剂、E525为润滑剂的尼龙6复合材料,具有高性能、低VOC的优点。     

Review on nano-and microfiller-based polyamide 6 hybrid composite: Effect on mechanical properties and morphology

Polyamide 6 (PA6)-based composites are of evolving interest due to its high strength, wear resistance, and barrier properties. The use of binary composites mostly with nanomaterial and glass fibers has been reviewed and presented in literature. However to obtain a balance of properties like stiffness, toughness, and strength along with cost reduction, ternary composites of PA6 have been designed. To achieve the balance, PA6 blend-based composites, with combination of microfiller/nanofiller or PA6 with combination micro-microfiller, PA6 with microfiller/nanofiller and fiber have been designed. The properties of PA6-based ternary hybrid composites depend on type of dispersed phase used, presence of compatibilizer, type of filler used (nanofiller or microfiller or fiber or hybrid) and combination of fillers used. However, a review in this direction is not available in literature. Here, in this study, an overall understanding of various fillers, dispersed phase, and their combinations can be understood along with the discussion on effect of these on tensile properties and morphology of hybrid composite. In this study, an attempt has been made to review the various fillers and dispersed phase and their combinations which have been used in designing the PA6 hybrid composite with good balance of stiffness, toughness, and strength.     

Ce-based organic framework enhanced the hydrogen evolution ability of ZnCdS photocatalyst

Ce-based organic framework materials [UIO-66(Ce)] were prepared, and the UIO-66(Ce)/ZnCdS composite was attained by microwave irradiation. Moreover, the photocatalytic hydrogen production activity was evaluated. The experimental results revealed that the ZnCdS nanoparticle was decorated on the surface of UIO-66(Ce), and the hydrogen production ability of ZnCdS nanoparticle was improved by UIO-66(Ce) significantly. The hydrogen production yield of UIO-66(Ce)/ZnCdS reaches 3.958 mmol/g·h, in which is as about 1.95 times as that of ZnCdS (2.031 mmol/g·h). The improvement for photocatalytic hydrogen production yield is because UIO-66(Ce) can facilitate the photoinduced carriers to separating.     

Polymer brush coatings for combating marine biofouling

A variety of functional polymer brushes and coatings have been developed for combating marine biofouling and biocorrosion with much less environmental impact than traditional biocides. This review summarizes recent developments in marine antifouling polymer brushes and coatings that are tethered to material surfaces and do not actively release biocides. Polymer brush coatings have been designed to inhibit molecular fouling, microfouling and macrofouling through incorporation or inclusion of multiple functionalities. Hydrophilic polymers, such as poly(ethylene glycol), hydrogels, zwitterionic polymers and polysaccharides, resist attachment of marine organisms effectively due to extensive hydration. Fouling release polymer coatings, based on fluoropolymers and poly(dimethylsiloxane) elastomers, minimize adhesion between marine organisms and material surfaces, leading to easy removal of biofoulants. Polycationic coatings are effective in reducing marine biofouling partly because of their good bactericidal properties. Recent advances in controlled radical polymerization and click chemistry have also allowed better molecular design and engineering of multifunctional brush coatings for improved antifouling efficacies.     

PA6/GF/环氧树脂复合材料性能的研究

利用PA6及玻璃纤维(GF)作原料,采用环氧树脂作为界面相容剂,研究了环氧树脂和加工工艺对PA6复合材料力学性能的影响。结果表明:加入不同环氧树脂,采用一步法制备的PA6复合材料性能差异很大;采用二步法制备的PA6复合材料性能差异较小,环氧树脂与PA6发生反应,能明显提高基体PA6的力学性能GFPA。     

高分子复合材料导热性能研究

以Al2O3、MgO和BN三种无机填料作为尼龙6(PA6)的导热填料,研究填料的种类、填充量、粒径大小和粒径配比等对复合材料热导率的影响。结果表明:PA6基复合材料的热导率随导热填料填充量的增加而增大,随导热系数大的填料填充量的增加增大较快;导热系数大的填料的粒径对复合材料的导热系数的影响比较明显;导热系数大的填料,不同粒径的复配可以显著提高复合材料的导热系。     

聚苯醚/聚酰胺合金的增容及增韧改性研究

研究了马来酸酐接枝聚苯醚(PPO-g-MAH)对PPO/尼龙66(PA66)合金的增容作用和苯乙烯-乙烯/丁烯-苯乙烯(SEBS)对PPO/PA66合金的增韧作用。扫描电镜的结果表明,PPO-g-MAH可以很好地改善PPO与PA66之间的相容性,通过力学性能的表征也证明PPO-g-MAH对PPO/PA66合金有很好的增韧作用。SEBS对PPO/PA66合金有很好的增韧效果,但会降低材料的刚性。     

TiO_2表面改性对聚酰胺6纤维强度及染色性能的影响

将TiO2表面包覆无定形TiO2,再经复配偶联剂改性后,分散在己内酰胺-水体系中乳化,于聚合釜中水解开环聚合,得到全消光聚酰胺6(PA6)切片。PA6切片经熔融纺丝制得PA6全消光纤维,并织成PA6全消光织物。用热重分析仪、纳米激光粒度仪、沉降试验等研究了改性TiO2的性能及在己内酰胺-水体系中的分散性;用差示扫描量热仪、扫描电子显微镜等研究了PA6全消光纤维结晶性能和截面形貌。结果表明:经复配偶联剂改性的TiO2在树脂基体中有很好的分散性;PA6全消光纤维的可纺性好;加入改性的TiO2后,PA6纤维的强度提高了25%,但对PA6纤维的熔融温度没有影响;改性PA6全消光织物的上染率提高了10%。