The effect of particle size distribution on the microstructure and properties of Al2O3 ceramics formed by stereolithography

Stereolithography (SL) shows advantages for preparing alumina-based ceramics with complex structures. The effects of the particle size distribution, which strongly influence the sintering properties in ceramic SL, have not been systematically explored until now. Herein, the influence of the particle size distribution on SL-manufactured alumina ceramics was investigated, including bending strength at room temperature, post-sintering shrinkage, porosity, and microstructural morphology. Seven particle size distributions of alumina ceramics were studied (in μm/μm: 30/5, 20/3, 10/2, 5/2, 5/0.8, 3/0.5, and 2/0.3); a coarse:fine particle ratio of 6:4 was maintained. At the same sintering temperature, the degree of sintering was greater for finer particle sizes. The particle size distribution had a larger influence on flexural strength, porosity and shrinkage than sintering temperature when the particle size distribution difference reached 10-fold but was weaker for 10 μm/2 μm, 5 μm/2 μm and 5 μm/0.8 μm. The sintering shrinkage characteristics of cuboid samples with different particle sizes were studied. The use of coarse particles influenced the accuracy of small-scale samples. When the particle size was comparable to the sample width, such as 30 μm/5 μm and 5 mm, the width shrinkage was consistent with the height shrinkage. When the particle size was much smaller than the sample width, such as 2 μm/0.3 μm and 5 mm, the width shrinkage was consistent with the length shrinkage. The results of this study provide meaningful guidance for future research on applications of SL and precise control of alumina ceramics through particle gradation.     

Phase composition,microstructure, and properties of Al4O4C–(Al2OC)1-x(AlN)x –Zr2Al3C4–Al2O3 refractories prepared at high temperatures in nitrogen

The novel Al₄O₄C–(Al₂OC)_1-x(AlN)_x–Zr₂Al₃C₄–Al₂O₃ refractories with ultra-low carbon content have been successfully prepared by constructing the core-shell structure of aluminum at 1300–1700°C in nitrogen. The phase composition, microstructure, and properties of the novel refractories are deeply investigated. The cracking temperature on the core-shell structure of aluminum is further explored and the reaction mechanism of Zr₂Al₃C₄ has also added explanation. The results show that the novel refractories have excellent physical properties and cannot be corroded by molten iron. There exist two different Al₂OC solid solutions in the novel refractories, Al₂OC-rich (Al₂OC)_1-x(AlN)_x and AlN-rich (Al₂OC)_1-x(AlN)_x. The temperatures affect their relative content. When temperatures are less than 1600°C, the relative content of Al₂OC-rich (Al₂OC)_1-x(AlN)_x is more than that of AlN-rich (Al₂OC)_1-x(AlN)_x. When temperatures are above 1700°C, the relative content of AlN-rich (Al₂OC)_1-x(AlN)_x is more than that of Al₂OC-rich (Al₂OC)_1-x(AlN)_x. The core-shell structure of aluminum fully ruptures at about 1200°C. Zr₂Al₃C₄ begins to form at about 1000°C and generates in large at 1200°C.     

3D打印连续芳纶纤维/聚乳酸波纹夹层结构复合材料的压缩性能研究

以连续芳纶纤维(Kevlar)为增强体,热塑性聚乳酸(PLA)为基体,采用熔融沉积成型(FDM)工艺,设计并制备了一体成型的Kevlar/PLA波纹夹层结构复合材料。研究了Kevlar/PLA波纹夹层结构复合材料在压缩载荷下的断裂模式,分析了结构参数、工艺参数对试样的压缩性能和结构密度的影响。结果表明,随着芯层波纹数量的增加,试样的压缩性能与结构密度均呈增大趋势;随着芯层波纹高度的增大,试样的压缩强度先增大后减小,结构密度不断减小;随着打印层高的增大,试样中的纤维体积含量不断减少,试样的压缩强度略有下降。     

In-situ formation of Al2O3/Al core-shell from waste material: Production of porous composite improved by graphene

Aluminum dross produced from aluminum industry was used to fabricate Al₂O₃/Al porous composites. The dross was milled for 20?h to obtain nano powder. The milled material was examined by TEM and XRD. Graphene (up to 4?wt%) was mixed with the dross and utilized to reinforce sintered composites. The milled powders were compacted then fired at various temperatures up to 700?°C. Physical properties in terms of bulk density and apparent porosity for sintered composites were tested using Archimedes method. SEM attached by energy dispersive spectrometer (EDS) was used to inspect microstructure and elemental analysis of sintered composites. Microhardness and compressive strength were also measured. Ultrasonic nondestructive technique was utilized to examine the elastic moduli. Electrical conductivity of sintered composite was also studied. During milling up to 20?h, Al₂O₃/Al core-shell was in-situ formed with size of 65.9 and 23.8?nm, respectively. The apparent porosity of sintered composites was improved with rising graphene percent while it decreased with increasing sintering temperature. Increasing of graphene mass percent and firing temperature led to remarkable increase in all mechanical properties and electrical conductivity. The maximum compressive strength, hardness, elastic modulus and electrical conductivity were 200?MPa, 1200?MPa, 215?GPa and 1.42?×?10^?5 S/m, respectively, obtained for composite sintered at 700?°C having 4?wt% graphene.     

Preparation of in situ grown silicon carbide whiskers onto graphite for application in Al2O3-C refractories

C-SiC composite powders were prepared by salt-assisted synthesis from Si powders, graphite, and a molten salt medium (NaCl and NaF) with the molar ratio of Si/C =?1/2 at 1300?°C for 3?h. After the C-SiC composite powders part and complete replacement of the graphite, the mechanical properties, oxidation resistance and slag-corrosion resistance of the Al₂O₃-C materials were studied by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS), as well as with dedicated equipment. The results indicated that SiC whiskers, with lengths of 10–50?nm, formed on the surface of the flake graphite, and the activation energy of oxidation of the C-SiC composite powder increased by 45.72?kJ?mol^?1 as compared to that of flake graphite. Furthermore, the decarburization area and slag erosion area of the Al₂O₃-C material decreased after 3?wt% of C-SiC composite powder was substituted for the flake graphite. Meanwhile, the cold modulus of rupture was maintained when 3?wt% of C-SiC composite powder was added. This improved both the oxidation and slag resistance of the Al₂O₃-C materials.     

Fabrication of multi-filler thermoset-based composite bipolar plates for PEMFCs applications: Molding defects and properties characterizations

The bipolar plate (BP) material should possess contradictory properties. They should also manufacture from low-cost methods and materials. In the current investigation, thermoset-based composite materials reinforced with conductive fillers, and the compression molding process is implemented. In addition to fabricating the bipolar plates (BPs) with and without the flowing channels, alleviating the defects during the molding process is performed. The channels are perfectly formed on the plates with the designed depth of 0.65 mm and 0.5 mm of width. In the meanwhile, we alleviate different molding defects, which spoil the surface appearance and part properties. Regarding the physical properties, the water contact angle is measured to be around 85°. The through-plane electrical conductivity of molded plates showed high values up to 38 S/cm, and the interfacial contact resistance measured to be 18–24 mΩ cm². The mean value of the flexural strength of the produced samples was equal to 47 MPa, which is almost twice the DOE target (>25 MPa).     

水热法一步合成磷酸铁锂及其性能研究

为优化液相法一步制备磷酸铁锂（LiFePO₄）技术,以七水合硫酸亚铁、磷酸二氢铵、一水合氢氧化锂为原料,通过添加十二烷基苯磺酸钠（SDBS）作为表面活性剂,采用液相水热法合成技术,一步合成了LiFePO₄正极材料。研究了水热法一步合成技术对LiFePO₄材料的组成、结构、形貌、粒度等的影响,通过电感耦合等离子体发射光谱仪（ICP-OES）、X射线衍射仪（XRD）、扫描电镜（SEM）、粒度分析仪等对材料进行了表征分析,并测试了材料的电化学性能。研究结果表明,合成得到的LiFePO₄材料为微米级球形颗粒形貌的正交晶系非化学计量比的Li_1.02Fe_0.994PO₄材料。电化学性能测试结果表明,在0.1C倍率下首次充、放电比容量分别为162.0、159.9 mA·h/g,库伦效率达到98.7%、倍率性能（以1C/0.1C保持率计）为92.3%,0.1C倍率循环100次容量保持率为96.4%,展现出良好的电化学性能。     

Influence of ZrB2 hard ceramic reinforcement on mechanical and wear properties of aluminum

In this work, the effect of ZrB₂ (0, 5, 10 and 20?vol%) ceramic reinforcement on densification, structure, and properties of mechanically alloyed Al was investigated. The milling of Al-ZrB₂ powder compositions resulted in formation of agglomerates with varied size. In particular, the size of agglomerates was reduced considerably with increased addition of ZrB₂ to Al. Interestingly, the densification of hot pressed Al increased from 96.06% to 99.22% with ZrB₂ addition. The reduction of agglomerates size was attributed to the enhanced densification of Al-ZrB₂ composites. Pure Al showed relatively low hardness (0.94?GPa) and it was improved to 1.78?GPa with the addition of 20?vol% ZrB₂. The mechanical properties have significantly been improved for Al-ZrB₂ composites. Especially Al - 20?vol% ZrB₂ possessed a very high yield strength (529?MPa), compressive strength (630?MPa) and compressive strain of 19.25%. Realization of such a good combination of mechanical properties is the highest ever reported for Al composites so far in the literature. The coefficient of friction (COF) of Al-ZrB₂ varied narrowly between 0.33 and 0.40 after dry sliding wear against steel disc. The wear rate of Al-ZrB₂ composites was within mild wear regime and varied between 98.88?×?10^?6 and 34.66?×?10^?6 mm³/Nm. Among all the compositions, Al - 20?vol% ZrB₂ composite exhibited the lowest wear rate and high wear rate was noted for pure Al. Mild abrasion, tribo-oxidation, third body wear (wear debris) and delamination were the major material removal mechanisms for Al-ZrB₂ composites. Overall the hardness, strength and wear resistance of Al - 20?vol% ZrB₂ composite was improved by 84.3%, 84.3% and 64.2%, respectively when compared to pure Al.     

热压对(Mg2Ni+Mg3Sb2)/Mg复合材料组织及性能的影响

采用粉末冶金工艺制备了不同Ni含量的(Mg2Ni+Mg3Sb2)/Mg基复合材料,并采用热压工艺对已制备的复合材料进行塑性变形处理,研究了热压对(Mg2Ni+Mg3Sb2)/Mg基复合材料显微组织及力学性能的影响。结果表明,热压变形可以细化基体Mg颗粒,提高Mg3Sb2和Mg2Ni相分布均匀性,消除材料中的孔洞和裂隙等缺陷,提高复合材料的致密度,同时,使复合材料的力学性能得到显著提高。     

Synthesis of magnetic nanocomposite microparticles for binding of chlorinated organics in contaminated water sources

In this work, the development of novel magnetic nanocomposite microparticles (MNMs) via free radical polymerization for their application in the remediation of contaminated water is presented. Acrylated plant-based polyphenols, curcumin multiacrylate (CMA) and quercetin multiacrylate (QMA), were incorporated as functional monomers to create high affinity binding sites for the capture of polychlorinated biphenyls (PCBs), as a model pollutant. The MNMs were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, dynamic light scattering, and UV–visible spectroscopy. The affinity of these novel materials for PCB 126 was evaluated and fitted to the nonlinear Langmuir model to determine binding affinities (K_D). The results suggest the presence of the polyphenolic moieties enhances the binding affinity for PCB 126, with K_D values comparable to that of antibodies. This demonstrates that these nanocomposite materials have promising potential as environmental remediation adsorbents for harmful contaminants.