Analysis of the Relation between Coupled Sink and Purification Based on Hydrogen Network Integration

In a hydrogen network, sinks and sources are generally connected to reactors or purifiers, which affect their compositions and flow rates. The relationship between these streams is studied based on the integration of the hydrogen network to identify the feasible and optimal operating conditions of reactors and purifiers. Equations are deduced to describe the quantitative relationship between hydrogen consumption, hydrogen concentration, flow rates of coupled sink and source, purification feed, and purified product. The purification and hydrogen‐consuming reactor parameters can be optimized in the design and operation stage of a hydrogen network. The case study proves that the proposed method is simple, easy to understand, and can be applied to identify the variation trend line and feasible region accurately without tedious calculation.     

Purification and characterization of a novel bacteriocin CAMT2 produced by Bacillus amyloliquefaciens isolated from marine fish Epinephelus areolatus

A novel bacteriocin named CAMT2 was produced by strain ZJHD3-06 which was isolated from the marine fish Epinephelus areolatus and identified as Bacillus amyloliquefaciens, Bacteriocin CAMT2 inhibits important food spoilage and food-borne pathogens such as Listeria monocytogenes, Staphylococcus aureus, Escherichia coli and Vibrio parahaemolyticus. Bacteriocin CAMT2 was purified by ammonium sulfate precipitation, gel filtration chromatography on Sephadex G-50 and reversed phase chromatography on a C₁₈ column. The molecular mass of the purified bacteriocin CAMT2 was about 20.0 kDa and N-terminal sequencing of the peptides revealed low similarity with existing antimicrobial peptides, as determined by an LC–MS/MS system. Bacteriocin CAMT2 was resistant for up to 100 °C and pH ranging 2–10, but lost its activity when treated with protease K. The bacteriocin also showed significant antimicrobial activity against L. monocytogenes in a meat model system. These obtained results suggest that bacteriocin CAMT2 has potential for use as a food biopreservative.     

Thermal and transport properties of as-grown Ni-rich TiNi shape memory alloys

Electrical resistivity, Seebeck coefficient, specific heat and thermal conductivity measurements on the Ti_50−xNi_50+x (x = 0.0–1.6 at.%) shape memory alloys are performed to investigate their thermal and transport properties. In this study, anomalous features are observed in both cooling and heating cycles in all measured physical properties of the slightly Ni-rich TiNi alloys (x ≤ 1.0), corresponds to the transformation between the B19′ martensite and B2 austenite phases. Besides, the transition temperature is found to decrease gradually with increasing Ni content, and the driving force for the transition is also found to diminish slowly with the addition of excess Ni, as revealed by specific heat measurements. While the signature of martensitic transformation vanishes for the Ni-rich TiNi alloys with x ≥ 1.3, the characteristics of strain glass transition start to appear. The Seebeck coefficients of these TiNi alloys were found to be positive, suggesting the hole-type carriers dominate the thermoelectric transport. From the high-temperature Seebeck coefficients, the estimated value of Fermi energy ranges from ∼1.5 eV (Ti_48.4Ni_51.6) to ∼2.1 eV (Ti₅₀Ni₅₀), indicating the metallic nature of these alloys. In addition, the thermal conductivity of the slightly Ni-rich TiNi alloys with x ≤ 1.0 shows a distinct anomalous feature at the B19′ → B2 transition, likely due to the variation in lattice thermal conductivity.     

Purification of Nickel Sulfate by Batch Cooling Crystallization

Cooling crystallization was successfully carried out in a batch cooling crystallizer from impure acidic solutions to recover nickel as nickel sulfate salt with three different cooling rates. The compositions of the solutions included impurities of sodium, magnesium, chloride, and sulfuric acid to mimic industrial nickel electrowinning process solutions. The results show that NiSO₄·6H₂O mainly crystallized, and its solubility and purity decreased with the increase in the mass ratio of chloride to sulfate. Cooling rates did not have a significant influence on crystal purity; however, it did affect the filter cake moisture; lower moisture can be obtained with a lower cooling rate. The sequence of impurity removal efficiency from high to low was Cl > Na > Mg.     

Status and initial experiments of DRAGON-V facility for lithium-lead blanket technologies of hydrogen fusion reactors

A dual-coolant integrated experimental facility named DRAGON-V has been developed at the Institute of Nuclear Energy Safety Technology, Hefei Institute of Physical Science, Chinese Academy of Sciences, for the key technology research and performance evaluation of candidate liquid lithium-lead (PbLi) blanket of hydrogen fusion reactors. The loop is composed of a material test sub-loop and thermal-hydraulic test sub-loop, the design parameters are PbLi inventory 20 tons, PbLi temperature up to 550 °C, the maximum PbLi flow rate up to 40 kg/s. A novel cold trap system is designed to remove the suspended and crystalized impurities in PbLi fluid with three cooling zones and cross row arrangement of rod bundle filter elements. The paper describes the loop itself and its major components, initial loop testing, flow and measurement diagnostics and current experiments. The obtained test results of the loop and its components have demonstrated that the new facility is fully functioning and ready for experimental studies of material corrosion with/without a magnetic field, magnetohydrodynamic (MHD) effect, purification, heat and mass transfer phenomena in PbLi flows and can also be used in mock-up testing in conditions relevant to fusion applications.     

废水制酸装置净化单元堵塞的治理

介绍了吉林石化公司丙烯腈厂废水制酸装置在生产过程中由于以液硫作为补充能源及制酸原料而出现的硫在焚烧炉中不完全燃烧和残余的硫升华而造成的净化系统堵塞等问题。通过改进焚烧炉系统以及净化单元采用二级逆喷洗涤系统等方法,原料硫得到了充分燃烧,在解决了净化单元系统堵塞问题的同时产生良好的社会效益。     

Purification of metal electroplating waste waters using zeolites

The sorption behaviour of natural (clinoptilolite) and synthetic (NaP1) zeolites has been studied with respect to Cr(III), Ni(II), Zn(II), Cu(II) and Cd(II) in order to consider its application to purify metal finishing waste waters. The batch method has been employed using metal concentrations in solution ranged from 10 to 200 mg/l and solid/liquid ratios ranged from 2.5 to 10 g/l. The Langmuir model was found to describe well all sorption processes, allowing to establish metal sorption sequences from which the main retention mechanism involved for each metal has been inferred. Synthetic zeolite exhibited about 10 times greater sorption capacities (b_Cr=0.838 mmol/g, b_Ni=0.342 mmol/g, b_Zn=0.499 mmol/g, b_Cu=0.795 mmol/g, b_Cd=0.452 mmol/g) than natural zeolite (b_Cr=0.079 mmol/g, b_Ni=0.034 mmol/g, b_Zn=0.053 mmol/g, b_Cu=0.093 mmol/g, b_Cd=0.041 mmol/g), appearing, therefore, as most suitable to perform metal waste water purification processes. This mineral showed the same high sorption capacity values when used in the purification of metal electroplating waste waters.     

Superhigh selective capture of volatile organic compounds exploiting cigarette butts-derived engineering carbonaceous adsorbent

Herein, we develop cost-efficient superhigh-performance of engineering carbonaceous adsorbent from cigarette butts using combined wet-impregnated and re-dispersed method of KOH, which optimizes the implant approach of activator, breaking the restriction of selective capture of toluene using traditional activated carbon. The Brunauer-Emmett-Teller (BET) surface area and pore volume of targeted adsorbent can attain 3088 m²·g^-1 and 1.61 cm³·g^-1, respectively, by optimizing the temperature-dependent synthetic factor effect of the adsorbent. The adsorption capacity of resultant adsorbent for presenting volatile benzene and toluene shows a positive correlation with increasing carbonization temperature of carbon precursor. Besides, we demonstrated the unsmoked and smoked butts derived adsorbents afford feeble difference in saturated adsorbed capacity of volatile organic compounds (VOCs). The highest adsorption capacity of sample CF-800 for benzene and toluene in CF group is as high as 1268.1 and 1181.6 mg·g^-1 respectively, slightly higher than that of sample UF-800, but far outperforming reported other adsorbents. The predicted adsorption selectivity of CF-800 and UF-800 for C₇H₈/H₂O (g) using the DIH (difference of isosteric heats) equation reach up to ca. 3800 and 7500 respectively, indicating the weak adsorbability of water vapor on the developed adsorbent and greater superiority of the smoked butts derived adsorbents in selective capture of VOCs at low relative humidity in the competitive adsorption process for practical mixed VOCs.     

Biochemical Characterization of Purified Esterase from Soybean (Glycine max) Seed

Alkaline esterase (carboxylic‐ester hydrolases; EC 3.1.1.1) extracted from germinated soybean seeds (Glycine max) was purified approximately 3.6 times by chromatography in a DEAE‐cellulose anion exchange column and filtration in Sephadex G100 gel. The molecular mass of the enzyme was estimated at 45 kDa by gel electrophoresis (SDS‐PAGE). The purified enzyme showed a specific activity of 5.6 U mg^?1 using p‐nitrophenyl butyrate as substrate. The esterase showed optimal activity at 47 °C in moderately alkaline pH, low stability in temperatures higher than 50 °C, and high stability at pH values between 6 and 9.5. The Ca²⁺ and Co²⁺ ions proved to have a positive effect on enzyme activity; however, Hg²⁺ completely inhibited esterase activity. Using p‐nitrophenyl butyrate as substrate, the enzyme showed a K_m of 0.39 mM, V_max of 31.5 mM mg^?1 min^?1 and k_cat 7.60 × 10⁶ s^?1. Regarding substrate affinity, the enzyme showed greater activity for substrates containing short‐chain fatty acids, especially p‐nitrophenyl acetate. Such characteristics give the enzyme great potential for application in the production of low molecular weight esters, in the food industry, and in chemical products. This enzyme is another new member of the family of lipases and esterases from vegetable seeds with high activity and stability in alkaline pH.     

乳癌组织中人类表皮生长因子受体2蛋白的纯化及鉴定

目的建立乳腺癌组织中人类表皮生长因子受体2(human epidermal growth factor receptor 2,HER2)蛋白的纯化方法。方法采用新鲜的乳腺癌组织制备匀浆液,经60%饱和硫酸铵盐析沉淀法进行乳腺癌组织蛋白的粗提;再通过DEAE-Sephadex A-50离子交换层析和两次Sephacryl S-200分子筛层析进一步纯化HER2蛋白;纯化蛋白进行SDS-PAGE和Western blot鉴定。结果纯化后HER2蛋白相对分子质量为185 000;HER2蛋白可与兔抗人HER2多克隆抗体发生特异性结合。结论建立的纯化方法获得了具有免疫学活性的HER2蛋白,为HER2单克隆抗体的制备奠定了基础。