Fabrication of high-efficiency Yb:Y2O3 laser ceramics without photodarkening

High-efficiency Yb:Y₂O₃ laser ceramics were fabricated using the vacuum-sintering plus hot isostatic pressing (HIP) without sintering additives. High-purity well-dispersed nanocrystalline Yb:Y₂O₃ powder was synthesized using a modified co-precipitation method in-house. The green bodies were first vacuum sintered at a temperature as low as 1430°C and then HIPed at 1450°C. Finally, the samples were air annealed at 800°C for 10 h. Although no sintering aids were used, full density of the samples with excellent optical homogeneity and an inline transmission of 80% at 400 nm could be obtained. Moreover, photodarkening phenomenon was not detected in the ceramics. Preliminary laser experiment with the fabricated ceramics in a two-mirror cavity has demonstrated 32 W continuous-wave (CW) output at ∼1077 nm with an optical-to-optical conversion efficiency of 58.2%. To the best of our knowledge, this is so far the highest CW output power and optical-to-optical conversion efficiency achieved with the Yb³⁺-doped sesquioxide ceramics in a simple two-mirror cavity.     

Achieving fabrication of highly transparent Y2O3 ceramics via air pre-sintering by deionization treatment of suspension

An easy albeit quite effective deionization suspension treatment was adopted to alleviate the detrimental effects related to the hydrolysis of Y₂O₃ in an aqueous medium. Fabrication of highly transparent Y₂O₃ ceramics with a fine grain size via air pre-sintering and post–hot isostatic pressing (HIP) treatment without using any sintering additive was achieved using the treated suspensions. The hydrolysis issue of Y₂O₃ powder in an aqueous medium was effectively alleviated by using deionization treatment, and a well-dispersed suspension with a low concentration of dissolved Y³⁺ species was obtained. The dispersed suspensions were consolidated by the centrifugal casting method, and the green bodies derived from the suspension of 35.0 vol% solid loading showed an improved homogeneity with a relative density of 52.1%. Fully dense Y₂O₃ transparent ceramic with high transparency was obtained by pre-sintering consolidated green compacts at a low temperature of 1400°C for 16 h in air followed by a post-HIP treatment at 1550°C for 2 h under 200 MPa pressure. The sample had a fine average grain size of 690 nm. The in-line transmittance of the sample reached 83.3% and 81.8% at 1100 nm and 800 nm, respectively, very close to the theoretical values of Y₂O₃.     

相变温度附近等温热处理对Mg97Zn1Y2合金组织演化的影响

研究了相变温度附近等温热处理温度和保温时间对含长周期结构Mg97Zn1Y2合金的组织的影响，并对演变机理进行了探讨。主要研究结论如下：500℃固溶处理时，随着时间的增加，长周期结构有增长的趋势。采用等温热处理可以将Mg97Zn1Y2合金中的枝晶组织转变为球状晶，当合金保温温度范围从540℃~600℃时，组织尺寸由大-小-大的顺序变化，即经过了粗化、分离及球化至最后粗化三个过程。在等温热处理温度为575℃的组织大致演变趋势为：枝晶态-不规则球形+块状-球形状，当保温时间15min，其组织为均匀、圆整的球状晶。     

Reactivity,Selectivity, and Stability of Zeolite-Based Catalysts for Methane Dehydroaromatization

Non-oxidative dehydroaromatization is arguably the most promising process for the direct upgrading of cheap and abundant methane to liquid hydrocarbons. This reaction has not been commercialized yet because of the suboptimal activity and swift deactivation of benchmark Mo-zeolite catalysts. This progress report represents an elaboration on the recent developments in understanding of zeolite-based catalytic materials for high-temperature non-oxidative dehydroaromatization of methane. It is specifically focused on recent studies, relevant to the materials chemistry and elucidating i) the structure of active species in working catalysts; ii) the complex molecular pathways underlying the mechanism of selective conversion of methane to benzene; iii) structure, evolution and role of coke species; and iv) process intensification strategies to improve the deactivation resistance and overall performance of the catalysts. Finally, unsolved challenges in this field of research are outlined and an outlook is provided on promising directions toward improving the activity, stability, and selectivity of methane dehydroaromatization catalysts.     

高岭土/二甲基亚砜插层物合成ZSM-5沸石及表征

引入高岭土/二甲基亚砜插层物(KDC)在水热合成体系下制备ZSM-5沸石复合材料。考察了KDC不同加入量对合成ZSM-5沸石分子筛的影响。采用粉末X射线衍射法、红外光谱(FT-IR)、热重 差热(TG-DTA)、N2静态吸附法、电子扫描电镜和透射电镜对合成的ZSM-5分子筛进行分析表征。结果表明，在合成体系中加入KDC合成的ZSM 5沸石分子筛物相单一，当KDC的加入质量分数为6%时，其相对结晶度达到55%，热稳定性较好，粒径约为5 μm，BET比表面积和孔径分别达到了199 m2/g和6.6 nm，具有介孔结构。     

Lipids and Antiplatelet Therapy: Important Considerations and Future Perspectives

Lipids play an essential role in platelet functions. It is known that polyunsaturated fatty acids play a role in increasing platelet reactivity and that the prothrombotic phenotype plays a crucial role in the occurrence of major adverse cardiovascular events. The ongoing increase in cardiovascular diseases’ incidence emphasizes the importance of research linking lipids and platelet function. In particular, the rebound phenomenon that accompanies discontinuation of clopidogrel in patients receiving dual antiplatelet therapy has been associated with changes in the lipid profile. Our many years of research underline the importance of reduced HDL values for the risk of such a rebound effect and the occurrence of thromboembolic events. Lipids are otherwise a heterogeneous group of molecules, and their signaling molecules are not deposited but formed “on-demand” in the cell. On the other hand, exosomes transmit lipid signals between cells, and the profile of such changes can be monitored by lipidomics. Changes in the lipid profile are organ-specific and may indicate new drug action targets.     

Effect of Y concentration and film thickness on microstructure and electrical properties of HfO2 based thin films

In this work, we introduced a simple solution processing method to prepare yttrium (Y) doped hafnium oxide (HfO₂) based dielectric films. The films had high densities, low surface roughness, maximum permittivity of about 32, leakage current < 1.0 × 10^?7 A/cm² at 2 MV/cm, and breakdown field >5.0 MV/cm. In addition to dielectric performance, we investigated the influence of YO_1.5 fraction on the electronic structure between Y doped HfO₂ thin films and silicon (Si) substrates. The valence band electronic structure, energy gap and conduction band structure changed linearly with YO_1.5 fraction. Given this cost-effective deposition technique and excellent dielectric performance, solution-processed Y doped HfO₂ based thin films have the potential for insulator applications.     

硅/铝比对Y型分子筛负载贵金属催化剂在甲基环戊烷加氢转化反应中催化性能的影响

以具有不同硅/铝比HY型分子筛为载体，采用浸渍法制备出一系列的Pt/HY双功能催化剂，并对其在甲基环戊烷(MCP)加氢转化反应中的催化性能进行了研究。采用X射线衍射(XRD)、扫描电子显微镜(SEM)、N2吸附-脱附、吡啶红外及NH3程序升温脱附(NH3-TPD)等手段对所制催化剂的物化性质进行表征，揭示了催化剂中载体酸性及负载金属对其催化性能的影响。结果表明，双功能Pt/HY催化剂中Pt粒子和载体HY酸活性中心协同催化对甲基环戊烷加氢转化产物分布有很大影响，通过载体HY酸活性中心的数量可对产物分布进行调控，同时具有高B/L酸酸量比值的HY为载体更有利于开环产物和扩环产物的生成。相比于Ir和Ru，Pt与酸中心作用更强，表现出对扩环产物的高选择性。