Influence of thermal runaway in styrene–acrylonitrile bulk copolymerization revealed by computational fluid dynamics modeling

The computational fluid dynamics (CFD) and kinetic-based moment methods coupled approach is adopted to simulate the bulk copolymerization of styrene–acrylonitrile (SAN) in a stirred tank reactor. Numerical simulations are carried out to investigate the impacts of impeller speed, monomer ratio, initiator ratio, and initial reaction temperature on the copolymerization process and product properties. Particularly, the Chaos theory is selected as a criterion for evaluating the occurrence of the thermal runaway. The Flory's and Stockmayer's distributions are employed to calculate chain length distribution and copolymer composition distribution of copolymer. The simulation results highlight that the appearance of thermal runaway can be postponed by properly increasing the rotation speed, decreasing the initiator loadings, initial acrylonitrile contents and initial reactor temperature. Furthermore, significant differences exist in the product properties that predicted by the ideal and non-ideal models, which demonstrates that the temperature heterogeneity plays a crucial role in SAN copolymerization. This study could offer references for the safe operation and design of polymerization processes.     

Effect of comb-type copolymer on crystallization of paraffin from waxy oils and methyl ethyl ketone (MEK) -toluene dewaxing

In this research, maleic anhydride-α-octadecene copolymer and its derivative with phenylethylamine was synthesized and its effect on the crystallization of paraffins was investigated. This derivative, when added into second cut of vacuum gas oil and forth cut of vacuum gas oil, increases the size and improves aggregation of paraffin crystals observed by polarizing light microscopy, increases onset temperature and enthalpy of paraffin crystallization determined by differential scanning calorimetry, improves the dewaxing efficiency with dosage of 100?ppm explored by MEK-toluene dewaxing.     

Poly(L-lysine)-poly(ethylene glycol) layers with different structure and their influence on silica suspension stability

The effects of the structure of di- and triblock copolymers of poly(L-lysine) – LYS with poly(ethylene glycol) – PEG as well as the length of nonionic fragment in the LYS-PEG macromolecule on the copolymer chains conformation in the adsorption layer formed on the colloidal silica (SiO2) surface were examined. Spectrophotometry and turbidimetry were applied for the determination of copolymer adsorbed amounts and stability coefficients of silica aqueous suspensions. The electrokinetic parameters such as solid surface charge density and zeta potential were also estimated. The adsorption of LYS-PEG was proved to be the highest at pH 10 whereas the lowest adsorption on the solid surface was found for the triblock copolymer with long fragments of LYS at the same pH value.     

涤纶针织布的有机硅改性聚酯-聚醚共聚物整理

采用酯交换-缩聚反应,在催化剂与稳定剂的作用下,以对苯二甲酸二甲酯、乙二醇、聚乙二醇与自制聚醚硅油为原料合成了有机硅聚酯-聚醚共聚物整理剂。试验探究了聚醚硅油的用量对反应产物性能的影响,通过红外光谱表征了有机硅聚酯-聚醚共聚物的结构,并对其在涤纶针织物上的最佳应用条件进行了研究。结果表明:聚醚硅油用量占酯交换反应物质量分数为6%时,用其处理的针织物亲水性和手感较好;最佳使用工艺条件为浸轧法,质量浓度20 g/L,120℃焙烘60s。     

聚苯乙烯/交联丙烯酸甲酯共混物的制备及其发泡性能研究

将聚苯乙烯（PS）颗粒溶解到二乙烯基苯（DVB）、丙烯酸甲酯（MA）与偶氮二异丁腈（AIBN）的混合物中，通过加热引发MA聚合，获得PS/交联PMA共混物, 采用釜压法制备了PS/交联PMA共混物泡沫。采用全自动视频光学接触角测试仪、差示扫描量热仪、傅里叶变换红外光谱仪、动态力学分析仪对PS/交联PMA共混物的结构和性能进行了表征，并通过扫描电子显微镜对PS/交联PMA共混物泡沫的结构进行了表征。结果表明，交联PMA的引入能提高体系的成核效率，随着MA用量的增加，PS/交联PMA共混物的接触角从PS的100.5 °降至86.1 °；当MA的用量为9.6份（质量份，下同）时，PS/交联PMA共混物的泡孔尺寸主要分布在40~60 μm之间，泡孔尺寸分布明显变窄，泡孔密度达到了1.2×10⁸ 个/cm³。     

纳米ZnO/有机氟改性丙烯酸酯乳液的合成与表征

以纳米ZnO、甲基丙烯酸十二氟庚酯(DFMA)、甲基丙烯酸甲酯(MMA)、丙烯酸丁酯(BA)为原料,用半连续种子乳液聚合法制备纳米ZnO/有机氟改性聚丙烯酸酯,探索了合成工艺,然后将合成乳液用于亚麻织物的整理。采用FT-IR、XPS和SEM等方法对乳胶膜和整理后的织物进行表征分析。结果表明:当乳化剂质量分数为4%,引发剂质量分数为1.5%,反应温度为80℃,保温时间为60 min时,乳液的合成效果最好。合成的乳液具有良好的抗紫外性能,其乳胶膜的吸水率为8.64%。XPS和SEM测试结果显示,合成的复合乳液和织物相结合,提高了亚麻织物的疏水性。相比聚丙烯酸酯整理后的织物,经复合乳液整理后的亚麻织物对水的接触角提高了60.4°。     

偶联剂对PLA/PBAT/WF复合材料3D打印性能的影响

以聚乳酸（PLA）和聚己二酸/对苯二甲酸丁二酯（PBAT）为基体，杨木粉（WF）为填充增强材料，使用混炼机熔融共混制备PLA/PBAT/WF复合材料，采用熔融沉积成型（FDM）技术制备标准实验试样，通过扫描电子显微镜、红外光谱分析、旋转流变测试以及力学试验等方法，研究不同含量的硅烷偶联剂KH550对PLA/PBAT共混物以及PLA/PBAT/WF的相容性、流变性及力学性能的影响。结果表明，在偶联剂用量为3 %（质量分数，下同）时，拉伸强度提高了136 %；偶联剂KH550与 PLA和PBAT共价键偶联生成接枝聚合物，二者相容性得到提高；同时偶联剂与WF表面羟基发生缩聚反应有效的改善了其与PLA/PBAT的基体相容性，PLA/PBAT/WF复合材料的FDM的制件力学性能得到较大提升；复合材料的黏度随偶联剂含量的增加呈下降的趋势，含量为3 %时线材的综合打印性能及制品质量最佳。     

MAPP/EAA处理对聚丙烯/小麦秸秆粉复合材料性能的影响

研究了马来酸酐接枝聚丙烯（MAPP）、乙烯丙烯酸共聚物（EAA）处理对聚丙烯（PP） /小麦秸秆粉（WSP）复合材料性能的影响。结果表明，随着体系中MAPP质量份数的增加，PP/WSP的拉伸强度和弯曲强度均逐渐增大，但冲击强度却先增加后减小，复合材料达到塑化峰的时间逐渐延长；使用EAA后，无论体系中是否已经使用了MAPP，PP/WSP的拉伸、弯曲和冲击强度均可得以提高，特别对于未使用MAPP的体系，效果更加明显，可分别提高65.04 %、45.42 %和6.75 %，储能模量增加，表面疏水性增强，平衡扭矩从13.9 N·m降至11.8 N·m，吸水尺寸变化率及吸水率下降，吸水平衡时间缩短；使用EAA可改善PP/WSP中WSP与PP间的界面结合，改善PP/WSP力学性能、热稳定性能、表面疏水性能、尺寸稳定性能和加工性能，降低其吸水率。     

Oval cuboid TiO2 particles with mesoporous structure fabricated by using fluorinated block copolymers as templates with photocatalytic performance

In this work, a poly(ethylene glycol)-b-poly(1H,1H,7H-dodecafluoroheptyl methacrylate) (PEG-b-PDFMA) block copolymer was first synthesized by the reversible addition−fragmentation chain transfer (RAFT) polymerization. Then a novel facile approach was developed to fabricate oval cuboid TiO₂ particles with mesoporous structure by using the PEG-b-PDFMA block copolymer as a template and titanium tetrabutoxide (TBOT) as a precursor, followed by evaporation-induced self-assembly (EISA) process and calcination process. The results show that the PEG-b-PDFMA block copolymer can control the oriented assembly of nanoparticles and act as templates for the formation of a mesopore. It is found that the mass ratio of TBOT/PEG-b-PDFMA and water content in the solution have a significant influence on the morphology of TiO₂ particles. When the mass ratio of TBOT/PEG-b-PDFMA is 0.25/1, oval cuboid TiO₂ particles with mesopores are obtained, which exhibits a high photocatalytic activity for the degradation of methylene blue (MB) dye under UV light irradiation.     

Tuning the pH-responsiveness capability of poly(acrylic acid-co-itaconic acid)/NaOH hydrogel: Design,swelling, and rust removal evaluation

The swelling behavior of poly(acrylic acid-co-itaconic acid)/NaOH hydrogel as well as its ability for iron and copper rust removal was studied and established for the first time. Through an experimental design, the influence of the synthesis parameters on hydrogel response was determined. It was found that pH-responsiveness dependence of hydrogel determines its application. In alkaline media, the hydrogel acted as superabsorbent, while in acidic, the most outstanding property was its pickling capability that allowed to clean carbon steel and copper metallic surfaces. Infrared, thermogravimetry, and scanning electron microscopy were performed to determine copolymer formation, thermal properties, and morphology. Metallic crystallographic phases formed during the corrosion processes were determined by X-ray diffractometer. Hydrogel adhesiveness followed by diffusion and dissolution of metal oxides species was identified as the main steps in the rust removal mechanism. This method offers a new, environmentally friendly perspective to eliminate corrosion from metallic surfaces compared with traditional strategies. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48403.