Nano fibrillated cellulose-based foam by Pickering emulsion: Preparation,characterizations, and application as dye adsorbent

An ecofriendly and biodegradable porous structure was prepared from drying aqueous foams based on nano fibrillated cellulose (NFC), extracted from softwood pulp by subcritical water/CO₂ treatment (SC-NFC). The primary aim of this work was to use the modified SC-NFC as stabilizer for a water-based Pickering emulsion which upon drying, yielded porous cellulosic materials, a good dye adsorbent. In order to exploit the carboxymethylated SC-NFC (CMSC-NFC, with a degree of substitution of 0.35 and a charge density of 649 μeqv/g) as a stabilizer for water-based Pickering emulsion in subsequent step, an optimized quantity of octyl amine (30 mg/g of SC-NFC) was added to make them partially hydrophobic. A series of dry foam structures were prepared by varying the concentrations of treated CMSC-NFCs and 4 wt% was found to be the optimum concentration to yield foam with high porosity (99%) and low density (0.038 g/cc) along with high compression strength (0.24 MPa), superior to the conventionally extracted NFC. The foams were applied to capture as high as 98% of methylene blue dyes, making them a potential green candidate for treating industrial effluent. In addition, the dye adsorption kinetics and isotherms were found to be well suited with second order kinetics and Langmuir isotherm models.     

Orange to green switching anthraquinone-based electrochromic material

An easily accessible anthraquinone-benzodithiophene-based high bandgap polymer (PTAq) was synthesized by Stille coupling reactions in remarkably high yield (96.5%). The highest occupied molecular orbital energy level of the polymer was estimated from the onset of oxidation in a cyclic voltammetry study to be −5.7 eV. PTAq showed an orange-to-green color switching with the application of a 1.0-V external potential to the polymer film, which was visible to the naked eye. The optical behavior change was also monitored using ultraviolet–visible absorption spectroscopy and revealed a respectable 75% transmittance change when the polymer film was subjected to a 1.0-V external potential. The high color contrast observed makes PTAq one of the most promising materials for electrochromic device applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47729.     

Carbon-based TiO2-x heterostructure nanocomposites for enhanced photocatalytic degradation of dye molecules

Application of brown titanium dioxide (TiO_2-x) and its modified composite forms in the photocatalytic decomposition of organic pollutants in the environment is a promising way to provide solutions for environmental redemption. Herein, we report the synthesis of effective and stable TiO_2-x nanoparticles with g-C₃N₄, RGO, and multiwalled carbon nanotubes (CNTs) using a simple hydrothermal method. Among all the as-synthesized samples, excellent photocatalytic degradation activity was observed for RGO-TiO_2-x nanocomposite with high rate constants of 0.075 min^?1_, 0.083 min^?1 and 0.093 min^?1 for methylene blue, rhodamine-B, and rosebengal dyes under UV–Visible light irradiation, respectively. The altered bandgap (1.8 eV) and the large surface area of RGO-TiO_2-x nanocomposite impacts on both absorption of visible light and efficiency of photogenerated charge electron (e^?)/hole (h⁺) pair separation. This resulted in enhanced photocatalytic property of carbon-based TiO_2-x nanocomposites. A systematic study on the influence of different carbon nanostructures on the photocatalytic activity of brown TiO_2-x is carried out.     

Adsorption performance of mesoporous silicas towards a cationic dye. Influence of mesostructure on adsorption capacity

The dye adsorption performance of four mesoporous silicas with different structure and textural properties, MCM-41, MCM-48, SBA-15 and mesocellular silica foam (MCF), was studied and compared by using toluidine blue O (TBO) as dye model in aqueous solution. These materials were characterized by X-ray diffraction (XRD), small-angle X-ray scattering, nitrogen adsorption-desorption analyses, and transmission electron microscopy (TEM). The effect of some parameters such as adsorbent dosage, contact time, temperature, and pH on the TBO removal in aqueous solution was studied. Results showed that adsorption capacity raised when adsorbent dosage, contact time and pH solution were increased while an increase in temperature decreased the adsorption of TBO. Langmuir, Freundlich and Temkin isotherm models were employed to elucidate the adsorption mechanism while the adsorption rate data were analyzed according to the pseudo-first and second-order kinetic models. Results showed that adsorption of TBO onto MCM-48, SBA-15, and MCF fitted well the Freundlich isotherm model while the kinetic studies showed that adsorption process could be better described by the pseudo-second-order model for all mesoporous silicas. Finally, some solvents were evaluated to carried out dye desorption from the TBO-loaded mesoporous silicas founding that acetic acid was the most efficient.     

QuEChERS结合高效液相色谱-串联质谱法同时测定黄颡鱼中7种染料类兽药残留

目的建立黄颡鱼中孔雀石绿、隐色孔雀石绿、结晶紫、隐色结晶紫、亚甲基蓝、天青A、天青B残留量检测的QuEChERS-高效液相色谱-串联质谱(high performanc eliquid chromatography-tandem mass spectrometry, HPLC-MS/MS)联用方法。方法样品中加入乙腈于-18℃冷冻30 min,再加入去水剂无水硫酸镁和氯化钠,漩涡振荡离心后取上清液加入净化萃取试剂,漩涡离心后氮气吹至近干,乙腈复溶并注入HPLC-MS/MS测试。结果在最优的条件下, 7种染料类兽药在0.1～10 ng/mL范围内线性关系良好,方法平均回收率为78.2%～95.3%,精密度为3.0%～5.6%。结论该方法简单、快速、可靠,线性关系良好,检出限低,灵敏度高,可用于黄颡鱼中7种染料类兽药残留测定。     

Synthesis and spectroscopic studies of some new azobenzenesulfonamide

Abstract

Diazotized sulfadiazine derivative (1) was coupled with some nitrogen heterocyclic namely (thiazolone derivatives 2a–c, thiazole derivatives 4a–c and barbituric acid derivatives 6a,b) to give the corresponding azo compounds 3a–c, 5a–c and 7a,b in good yields. The newly synthesized azo benzene sulfonamide dyes were recorded their UV visible spectra in the region 200–600?nm in four different solvents and discussed the effect of solvents, substituent and effect of acid and base on the absorption values of these dyes.     

一色齿毛菌对直接大红4BS染料的脱色

为避免染料废水处理造成二次污染,采用生物法对直接染料进行脱色处理,通过观察接种一色齿毛菌后染料固体培养基颜色的变化,评价一色齿毛菌对5种直接染料的脱色效果;利用单因素和正交试验对一色齿毛菌脱色直接大红4BS的条件进行优化,得到优化条件:葡萄糖质量浓度为20 g/L,硝酸铵质量浓度为1 g/L,硫酸镁浓度为1.5 mmol/L,每50 mL反应体系接菌量为2片(直径为1 cm)。结果表明:一色齿毛菌对5种直接染料均有脱色能力,其中对直接大红4BS染料的脱色更为彻底;在优化条件下,一色齿毛菌对直接大红4BS脱色13 d时的脱色率达92.00%, 与优化前的脱色率相比提高了50.82%。     

基于LS-SVM棉针织物轧烘轧蒸染色工艺的预测模型

为优化活性染料对棉针织物的轧烘轧蒸染色工艺,基于最小二乘支持向量机(LS-SVM),以氯化钠质量浓度、碳酸钠质量浓度、烘干时间和汽蒸时间作为预测模型的输入变量,染色织物K/S值作为输出变量,建立了多因素模型并进行预测。结果表明,织物实验K/S值和模型预测值的相关系数高达0.99996,平均相对误差小于0.5%,说明该模型具有较高的精度,该建模方法可用于染色织物K/S值的预测,可以用于棉针织物轧烘轧蒸染色工艺的预测和优化。     

HPTLC-SERS快速检定葡萄汁中苏丹染料掺假

建立并优化一种基于高效薄层色谱和表面增强拉曼联用检测技术的方法,用于快速准确定性定量检测葡萄汁中的苏丹染料掺伪。使用石油醚/丙酮/乙酸(9/1/0.1,体积比)作为流动相在硅胶板上对目标物进行色谱分离,考察纳米银胶体浓度、外加电解质种类、浓度以及入射激光波长等参数对检测信号质量的影响。结果表明,10倍浓缩的纳米银胶体,633nm入射激光,辅以0.5~1.0mol/L NaCl最适合4种目标物的检测。优化检测条件后,检测灵敏度可达0.01~0.05mg/kg;在1~20 mg/kg浓度范围内,检测结果表现出良好的线性关系,R~20.996。不仅如此,对葡萄汁样品的测试中,该方法也表现出良好的准确性(添加回收率72%~104%)和精密度(RSD 4.5%~9.6%),因此特别适于大批量饮料和食品样品中非法色素添加的筛检。     

光敏剂敏化Cu-有机骨架对活性深蓝K-R的高效光催化降解

针对活性染料废水引起的水污染,采用硝酸铜与4,4',4″-[1,3,5-苯基三(酰胺基)]三苯甲酸(H₃L)反应,制备了三维多孔的Cu-有机骨架(Cu-MOF)材料,对染料进行光催化降解。研究了Cu-MOF的热学性能,通过粉末X射线衍射分析确认了其结构特征。通过可见光吸收能力不同的甲基橙(MO)和亚甲基蓝(MB)对Cu-MOF进行敏化,制备了2种复合材料以提升光催化降解效能。研究表明:Cu-MOF及MO-Cu-MOF和MB-Cu-MOF(10 mg) 对40 mL 的34.02 mg/L的活性深蓝K-R的可见光催化降解效率分别为42.4%、76.2%和88.4%,光催化速率常数分别为0.029、0.082、0.122 h^-1,最佳pH值为8;5次光催化循环之后,MB-Cu-MOF对治性深蓝K-R的降解效率仍高达75.1%。