矿用履带式运输车在复杂开采条件下的应用

为了方便煤炭的运输，某矿使用了矿用履带式搬运车。履带运输车解决了轮式运输车在恶劣道路条件下不能行走的问题，这种履带车是一种新型的运输工具，其特点是体积小、转弯灵活、动力强大，可在不受场地限制的情况下轻松通过狭窄的地方，能有效解决山区、土壤、陡坡等恶劣条件下物料的运输问题，适合普通运输车辆无法通行的地方。介绍了矿用履带式搬运车的主要结构以及工作原理，并给出了实际应用中应注意的事项。     

填料类型与填充率对短程硝化的影响研究

研究不同填料类型与不同填充率对氨氮转化能力及亚氮积累效果影响。结果表明,在填充率相同的情况下,比表面积800 m²/m³的PE-03型号填料亚硝化效果最佳,氨氮转化50%,亚氮积累99%,PE-04型号填料比表面积1 200 m²/m³,相比于PE-03,氨氮转化降低5%、亚氮积累降低3%,PE-05型号填料比表面积510 m²/m³,相比于PE-03,氨氮转化30%、亚氮积累92%;随着填料填充率10%增加到30%,氨氮转化能力从20%增长至55%,之后再增加填充料,会小范围减小亚硝化能力,最低降至48%,由于该阶段亚硝化稳定运行,AOB优势生长,填充率的改变对亚氮积累率的影响不大。不同填料类型的影响研究中,PE-03型号的填料效果最佳;在填充率的考察中,随着同种填料填充率的增加,氨氮转化能力先增加后略微减小,对亚氮积累的情况影响较小;综合经济及技术因素,确定悬浮填料取材为PE-03型号,比表面积为800 m²/m³     

Deconvoluting Energy Transport Mechanisms in Metal Halide Perovskites Using CsPbBr3 Nanowires as a Model System

Understanding energy transport in metal halide perovskites is essential to effectively guide further optimization of materials and device designs. However, difficulties to disentangle charge carrier diffusion, photon recycling, and photon transport have led to contradicting reports and uncertainty regarding which mechanism dominates. In this study, monocrystalline CsPbBr₃ nanowires serve as 1D model systems to help unravel the respective contribution of energy transport processes in metal-halide perovskites. Spatially, temporally, and spectrally resolved photoluminescence (PL) microscopy reveals characteristic signatures of each transport mechanism from which a robust model describing the PL signal accounting for carrier diffusion, photon propagation, and photon recycling is developed. For the investigated CsPbBr₃ nanowires, an ambipolar carrier mobility of μ = 35 cm² V⁻¹ s⁻¹ is determined, and is found that charge carrier diffusion dominates the energy transport process over photon recycling. Moreover, the general applicability of the developed model is demonstrated on different perovskite compounds by applying it to data provided in previous related reports, from which clarity is gained as to why conflicting reports exist. These findings, therefore, serve as a useful tool to assist future studies aimed at characterizing energy transport mechanisms in semiconductor nanowires using PL.     

纳米药物非临床药代动力学的研究策略及关注要点

随着纳米技术的迅速发展，纳米药物的研发已成为目前药物创新的发展方向之一。纳米药物具有基于纳米结构的尺度效应，其药代动力学特征与普通药物相比存在明显差异，其药代动力学研究与普通药物相比也有其特殊性。本文着重探讨纳米药物的非临床药代动力学的研究策略及关注要点，包括受试物、体内/外试验、生物样本分析、数据评价分析等，期望为研发者提供参考。     

Research and development of liquid hydrogen (LH2) temperature monitoring system for marine applications

Monitoring the temperature in liquid hydrogen (LH₂) storage tanks on ships is important for the safety of maritime navigation. In addition, accurate temperature measurement is also required for commercial transactions. Temperature and pressure define the density of liquid hydrogen, which is directly linked to trading interests. In this study, we developed and tested a liquid hydrogen temperature monitoring system that uses platinum resistance sensors with a nominal electrical resistance of approximately 1000 Ω at room temperature, PT-1000, for marine applications. The temperature measurements were carried out using a newly developed temperature monitoring system under different pressure conditions. The measured values are compared with a calibrated reference PT-1000 resistance thermometer. We confirm a measurement accuracy of ±50 mK in a pressure range of 0.1 MPa–0.5 MPa.     

Methylcyclohexane production under fluctuating hydrogen flow rate conditions

Energy storage using liquid organic hydrogen carrier (LOHC) is a long-term method to store renewable energy with high hydrogen energy density. This study investigated a simple and low-cost system to produce methylcyclohexane (MCH) from toluene and hydrogen using fluctuating electric power, and developed its control method. In the current system, hydrogen generated by an alkaline water electrolyzer was directly supplied to hydrogenation reactors, where hydrogen purification equipment such as PSA and TSA is not installed to decrease costs. Hydrogen buffer tanks and compressors are not equipped. In order to enable MCH production using fluctuating electricity, a feed-forward toluene supply control method was developed and introduced to the system. The electrolyzer was operated under triangular waves and power generation patterns of photovoltaic cells and produced hydrogen with fluctuating flow rates up to 7.5 Nm³/h. Consequently, relatively high purity of MCH (more than 90% of MCH mole fraction) was successfully produced. Therefore, the simplified system has enough potential to produce MCH using fluctuating renewable electricity.     

Intelligent Power Compensation System Based on Adaptive Sliding Mode Control Using Soft Computing and Automation

The approach power compensator system (APCS) plays a role in the automatic carrier landing system (ACLS), and the performance of the APCS is affected by the carrier air-wake in the final-approach . In this paper, the importance of the APCS is verified through the analysis of the signal flow chart of the ACLS. Hence, it is necessary to suppress the carrier air-wake in order to improve the anti-interference ability. The adaptive sliding mode control (ASMC) not only has better dynamic tracking performance compared to the nonlinear mode, but also can efficiently resist the disturbance caused by the carrier air-wake. The design of the longitudinal control law of the ACLS is based on the carrier-based aircraft nonlinear model and the carrier air-wake model. It comprises the longitudinal guidance rate, autopilot (CAS) and the APCS. The ASMC is used to design the APCS to suppress the carrier air-wake. A comparison of the simulation results indicates that the design based on the ASMC has better anti-interference ability and can keep the velocity constant on the timely.     

Embedded Metal Oxide Plasmonics Using Local Plasma Oxidation of AZO for Planar Metasurfaces

New methods for achieving high-quality conducting oxide metasurfaces are of great importance for a range of emerging applications from infrared thermal control coatings to epsilon-near-zero nonlinear optics. This work demonstrates the viability of plasma patterning as a technique to selectively and locally modulate the carrier density in planar Al-doped ZnO (AZO) metasurfaces without any associated topographical surface profile. This technique stands in strong contrast to conventional physical patterning which results in nonplanar textured surfaces. The approach can open up a new route to form novel photonic devices with planar metasurfaces, for example, antireflective coatings and multi-layer devices. To demonstrate the performance of the carrier-modulated AZO metasurfaces, two types of devices are realized using the demonstrated plasma patterning. A metasurface optical solar reflector is shown to produce infrared emissivity equivalent to a conventional etched design. Second, a multiband metasurface is achieved by integrating a Au visible-range metasurface on top of the planar AZO infrared metasurface. Independent control of spectral bands without significant cross-talk between infrared and visible functionalities is achieved. Local carrier tuning of conducting oxide films offers a conceptually new approach for oxide-based photonics and nanoelectronics and opens up new routes for integrated planar metasurfaces in optical technology.     

Energy Filtering of Charge Carriers: Current Trends,Challenges, and Prospects for Thermoelectric Materials

Exhaustive attempts are made in recent decades to improve the performance of thermoelectric materials that are utilized for waste heat‐to‐electricity conversion. Energy filtering of charge carriers is directed toward enhancing the material thermopower. This paper focuses on the theoretical concepts, experimental evidence, and the authors' view of energy filtering in the context of thermoelectric materials. Recent studies suggest that not all materials experience this effect with the same intensity. Although this effect theoretically demonstrates improvement of the thermopower, applying it poses certain constraints, which demands further research. Predicated on data documented in literature, the unusual dependence of the thermopower and conductivity upon charge carrier concentrations can be altered through the energy filtering approach. Upon surmounting the physical constraints discussed in this article, thermoelectric materials research may gain a new direction to enhance the power factor and thermoelectric figure of merit.     

Defect Engineering in Ambipolar Layered Materials for Mode-Regulable Nociceptor

Defect engineering represents a significant approach for atomically thick 2D semiconductor material development to explore the unique material properties and functions. Doping-induced conversion of conductive polarity is particularly beneficial for optimizing the integration of layered electronics. Here, controllable doping behavior in palladium diselenide (PdSe₂) transistor is demonstrated by manipulating its adatom-vacancy groups. The underlying mechanisms, which originate from reversible adsorption/desorption of oxygen clusters near selenide vacancy defects, are investigated systematically via their dynamic charge transfer characteristics and scanning tunneling microscope analysis. The modulated doping effect allows the PdSe₂ transistor to emulate the essential characteristics of photo nociceptor on a device level, including firing signal threshold and sensitization. Interestingly, electrostatic gating, acting as a neuromodulator, can regulate the adaptive modes in nociceptor to improve its adaptability and perceptibility to handle different danger levels. An integrated artificial nociceptor array is also designed to execute unique image processing functions, which suggests a new perspective for extension of the promise of defect engineered 2D electronics in simplified sensory systems toward use in advanced humanoid robots and artificial visual sensors.