活性焦法烧结烟气脱硫率影响因素统计解析

摘要：为明确影响活性焦烧结烟气脱硫的主要因素，通过模拟试验和生产数据统计分析探究脱硫塔自上至下脱硫率变化趋势和各运行参数对脱硫率的影响。模拟试验表明，循环使用后的活性焦孔隙结构更加发达，表面含氧官能团含量增加，进而其初期脱硫性能低于新鲜活性焦，后期优于新鲜活性焦。错流式脱硫塔自上至下脱硫率先后经历100%、快速降低、缓慢降低等过程。生产数据统计分析表明，脱硫率与SO2质量浓度、O2体积分数、H2O体积分数、NH3与NOx物质的量之比、解析温度呈正相关，与活性焦床温度、体积空速呈负相关。其中，SO2质量浓度、体积空速、活性焦床温度对脱硫率影响最大。运行参数之间存在多重共线性现象，烧结漏风率升高或空气补加量增加将引起诸多运行参数的变化，但总体上有利于脱硫率的提高。     

Catalytic oxidative desulfurization of gasoline using phosphotungstic acid supported on MWW zeolite

Catalysts for the desulfurization of gasoline samples were synthesized via the immobilization of well-dispersed phosphotungstic acid (HPW) on Mobil composition of matter-twenty-two (MWW) zeolite. Characterization results indicated that these catalysts possess a mesoporous structure with the retention of the Keggin structure of immobilized HPW. Relevant reaction parameters influencing sulfur removal were systematically investigated, including HPW loading, catalyst dosage, temperature, initial S-concentration, molar ratio of oxidant to sulfide (O/S), volume ratio of MeCN to model oil (Ext./oil), and sulfide species. The 40 wt-% HPW/MWW catalyst exhibited the highest catalytic activity with 99.6% dibenzothiophene sulfur removal from prepared samples. The 40 wt-% HPW/MWW catalyst was recycled four times and could be easily regenerated. Finally, as an exploratory study, straight-run-gasoline and fluid catalytic cracking gasoline were employed to accurately evaluate the desulfurization performance of 40 wt-% HPW/MWW. Our research provides new insights into the development and application of catalysts for desulfurization of gasoline.     

移动床活性焦烟气净化工艺中废活性焦的形成与特征分析

移动床活性焦低温干法烟气多污染物脱除技术在钢铁烧结烟气脱硫脱硝工艺中具有良好的适用性，但烟气净化过程中活性焦的损耗成为制约该技术推广应用的关键因素之一。以宝钢烧结烟气脱硫脱硝工艺中所产生的废活性焦为研究对象，通过考察其比表面积、孔容结构、灰分中重金属及碱金属含量、表面官能团特征及脱硫脱硝性能，探究烟气净化过程中活性焦组成、结构及表面性质的变化。结果表明，与新鲜活性焦相比，废活性焦粒度集中分布在0.2?5 mm，其表面的氮、氧、硫元素及过渡金属氧化物含量显著增加，比表面积由191.0 m2/g增加至499.0 m2/g，使废活性焦颗粒在150℃下脱硝率由20%提升到70%，120℃下穿透硫容由0.27 mg SO2/g提升至11.08 mg SO2/g，显示了良好的再利用潜力。     

燃油选择性吸附脱硫的多孔材料研究进展

吸附脱硫技术具有操作条件温和、节能、不改变燃油品质和成本低等特点而备受关注。针对噻吩类难脱除硫化物的深度脱除和转化问题，综述了近年来应用多孔吸附材料选择性吸附超深度脱除燃油中噻吩类硫化物的作用机理及最新研究进展。重点分析了分子筛、金属有机骨架、多孔炭材料、复合材料等不同吸附剂的研究现状，并探讨了各种吸附材料的吸附机理、改性方式和优缺点。本文指出分子筛因优异的热稳定性、高比表面积、均一的孔道结构、低成本和易于工业化等特点，是目前最具优势的吸附剂材料。未来研究应着重阐明吸附机理、提高合成便捷性、脱硫性能以及再生能力，更全面系统的研究将为开发具有理想选择性和再生能力的高效吸附剂奠定基础。     

配加预处理脱硫灰对铁矿烧结基础特性的影响

 半干法脱硫灰堆弃处理占用土地且容易造成二次污染,将脱硫灰预处理后替代CaO熔剂配入烧结有望充分利用其中的熔剂组分,实现脱硫灰在钢铁企业的闭路资源化利用。研究了脱硫灰配加焦粉加热分解特性及替代CaO熔剂配加对铁矿粉烧结基础特性的影响。结果表明,配加1%焦粉可以有效提高脱硫灰分解率,减少CaSO₄的生成。随着预处理脱硫灰替代CaO比例的增加,铁矿粉同化温度和黏结相强度呈现先增加后减小的趋势;液相流动性呈现单调增加趋势,当替代比超过40%时,液相流动性形成了流动性很大的“假象”;黏结相微观结构表明,替代比例小于40%时,有利于烧结试样中铁酸钙的生成;综合考虑,最佳的替代比例应小于40%。     

华北地区含硫化氢地下储气库脱硫运行技术

为了进一步推动国内含H_2S地下储气库的优化运行,以华北地区X地下储气库为例,为防止其运行过程中采出的天然气因含H_2S引发的安全问题,提出了有针对性的脱硫运行技术对策。主要包括:井筒抗硫技术、含硫气井井口失控远程点火技术和地面H_2S处理技术。地下选用国产宝钢生产的D114.3 mm BGT1气密封型防硫化氢螺纹油管及耐压强度达34.5 MPa的井下安全阀。对含硫井口配备失控远程点火系统。在地面主要采用"活性炭+脱硫剂"分层装填脱硫塔的方式实现采出混合气体脱硫,并结合储气库井受双向压力及井底热传导效应促进硫溶解。通过摸索并实施一系列针对性的技术对策,X储气库完全自主实现零事故安全运行,为类似地下储气库的建设及运行提供了一定的参考。     

Molybdenum Dioxide in Carbon Nanoreactors as a Catalytic Nanosponge for the Efficient Desulfurization of Liquid Fuels

The principle of a “catalytic nanosponge” that combines the catalysis of organosulfur oxidation and sequestration of the products from reaction mixtures is demonstrated. Group VI metal oxide nanoparticles (CrO_x, MoO_x, WO_x) are embedded within hollow graphitized carbon nanofibers (GNFs), which act as nanoscale reaction vessels for oxidation reactions used in the decontamination of fuel. When immersed in a model liquid alkane fuel contaminated with organosulfur compounds (benzothiophene, dibenzothiophene, dimethyldibenzothiophene), it is found that MoO₂@GNF nanoreactors, comprising 30 nm molybdenum dioxide nanoparticles grown within the channel of GNFs, show superior abilities toward oxidative desulfurization (ODS), affording over 98% sulfur removal at only 5.9 mol% catalyst loading. The role of the carbon nanoreactor in MoO₂@GNF is to enhance the activity and stability of catalytic centers over at least 5 cycles. Surprisingly, the nanotube cavity can selectively absorb and remove the ODS products (sulfoxides and sulfones) from several model fuel systems. This effect is related to an adsorptive desulfurization (ADS) mechanism, which in combination with ODS within the same material, yields a “catalytic nanosponge” MoO₂@GNF. This innovative ODS and ADS synergistic functionality negates the need for a solvent extraction step in fuel desulfurization and produces ultralow sulfur fuel.     

半干法烟气脱硫脱硝除尘一体化技术在焦化厂中的应用

介绍了焦化厂半干法烟气脱硫脱硝除尘一体化技术在焦化厂中的应用,描述了半干法烟气脱硫、低温选择性催化还原法(SCR)脱硝+除尘一体化工艺流程,该工艺运行效果、运行参数、工艺技术的特点,运行中常见问题及解决方法和未来需要进一步思考和解决的问题等。实践证明,该工艺技术在焦化厂能够长期稳定运行,脱硫脱硝及除尘效果较好,烟气指标可达到环保要求。