布帮鞋无浆贴合工艺技术

本工艺是对原有工艺的改进，突破了原有布帮鞋不能采用无浆贴合的局限性，对原有工艺中的不足有了很大的改进，提高了生产效率，改善了鞋子外观质量，增加了鞋子的美观性。     

含能材料分子结构与感度的相关性

综述了国外近年来含能材料分子结构参数与感度相关关系的最新研究成果。研究表明：某些芳香族硝基化合物的撞击感度与Ｃ－ＮＯ２键强度有关；硝胺及脂肪族硝基化合物的冲击波感度与分子中Ｎ－ＮＯ２键的数目，长度和分子量相关。     

Influence of Shaping Condition on Etherification Performance of Hβ Zeolite

Etherification reaction of FCC light gasoline over Hβ zeolite was investigated to decrease the light olefins in motor gasoline while enhancing octane. Etherification activity of several molecular sieve catalysts for FCC light gasoline was studied in a fixed-bed reactor. The influence of pore-enlarging agent (PEG) with different molecular weight, binder (γ-Al₂O₃), and peptizing agent (HNO₃) in the shaping process on etherification activity of Hβ zeolite was studied. The impregnating ways of precursor of oxides and the order of extruding and impregnating were also investigated. The results show that the activity of extruded Hβ zeolite before impregnating precursor of oxides is higher than the reverse order. The best shaping condition obtained was PEG-4000 10%, γ-Al₂O₃ 20%, and HNO₃ 10%. At the optimal reaction condition, the conversion of tert-olefins reached the peak. 62.93%, the yield of TAME, is also high and the technology can be applied to industry as well.     

Contact interaction of double titanium and chromium diboride with Fe-Cr alloys

The kinetics of wetting double titanium and chromium diboride by iron-based alloys with different chromium content is studied. It is shown that contact angles are formed in such systems over the range 0–10°. The energy parameters of wetting are calculated. It is established that chromium as a surface-active element promotes Fe-Cr alloy spreading on the diboride surface. The microstructure of the interaction area is studied. It is shown that terminal solid solutions and eutectics are formed in the TiCrB₂-(Fe-Cr) system. The optimum compositions of the metallic binder are determined for TiCrB₂-based composite materials. __________ Translated from Poroshkovaya Metallurgiya, Vol. 46, No. 1–2(453), pp. 109–115, 2007     

CORDIS无机粘结剂的特性与试验

介绍了德国HA公司最新研制的CORDIS无机粘结剂的组成与性能以及应用中的问题。     

铸造用聚氨酯粘合剂组份Ⅰ酚醛树脂合成研究

铸造用的聚氨酯粘合剂组合物，主要由极性和非极性溶剂溶解的酚醛树脂组份I和非极性溶剂稀释的聚异氰酸酯组份Ⅱ组成。组份Ⅰ酚醛树脂结构、性能是决定该类粘合剂性能因素之一。本文对铸造用聚氨酯粘合剂的组份Ⅰ酚醛树脂结构、合成方法、原料材料选择等问题进行了分析讨论，为铸造用聚氨酯粘合剂的组份Ⅰ的制备和苯醚型酚醛树脂的合成提供一些参考。     

粘结剂组成对粘结剂和喂料热性能的影响

研究制备了PW，BO，OP3大系列10种组成的粘结剂及相应10种W-Ni-Fe粉末与粘结剂的混合料。并采用热失重-差热分析(TGA-DTA)分析了粘结剂和喂料的热性能。研究结果表明，粘结剂组成对粘结剂和喂料的热性能如熔点、热分解温度和热分解曲线有很大的影响。通过此变化可以更为准确地确定不同粘结剂组成的喂料中的粘结剂脱除工艺和脱除方式。     

煤与粘结剂的相互作用和型煤抗压强度的关系

煤的润湿性与型煤抗压强度相关。用于表征煤的润湿性方法有煤与淀粉粘结剂的接触角、粘合功、煤的润湿临界表面张力等。研究证明,随着煤化程度的升高,煤与淀粉粘结剂接触角变小,粘合功增加,粉煤的润湿性改善,型煤抗压强度得以提高。另外,煤的润湿临界表面张力越大,煤的润湿性越好,型煤抗压强度也就越高。     

耐高温绝缘涂层的研制

采用有机硅树脂、无机粘结剂和无机填料制备的有机无机复合耐高温绝缘漆，其涂层经600℃，1h的热处理后可具有良好的附着力和绝缘性能。配套后的绝缘涂层，可在250℃下长期使用，并具有良好的耐冷热循环、耐湿热的能力。     

Influence of the composition of the binder and the carbonation on the zeta potential values of hardened cementitious materials

Electroosmotic experiments have been carried out on eight different mixes of hardened cementitious matrixes including concrete, mortar and pastes, different types of binders, carbonated and non-carbonated specimens and different test conditions. From these trials, the zeta potential values have been determined and the optimum experimental parameters and devices have been established. In addition, the influence of the composition of the binder on the zeta potential has been quantified indicating that higher amounts of Al₂O₃ in the binder lead to higher positive values of zeta potential, while the SiO₂ acts just on the opposite side. This has been explained in terms of the different i.e.p. (isoelectric point) for both oxides. Concerning the influence of carbonation, it increases the absolute value of the zeta potential toward more negative values; this behaviour has been attributed to the influence of the specifically adsorbed Ca²⁺ in the negative sites of the surface in the non-carbonated samples.