Facile Fabrication of Luminescent Eu(III) Functionalized HOF Hydrogel Film with Multifunctionailities: Quinolones Fluorescent Sensor and Anticounterfeiting Platform

The luminescent hydrogen-bonded organic framework (HOF) based films have become one of the most remarkable materials for optical application, thus, developing facile synthesis methods and establishing multifunctional applications for HOF-based luminescent materials are essential. Herein, a dual-emitting Eu³⁺-functionalized HOF hydrogel film ( 1 ) is fabricated successfully. 1 emits a blue-green long afterglow when turning off the UV lamp, and the long afterglow lifetime gets to 1.99 s. 1 performs great selectivity, high sensitivity, and low detection limit toward ofloxacin and flumequine, and the sensing toward ofloxacin and flumequine is in accord with the chroma and ratio modes. The fluorescent response mechanisms of 1  toward ofloxacin and flumequine are investigated in depth, which are further utilized to build an anticounterfeiting platform with high-level security. The film-based anticounterfeiting platform can conduct information encryption on demand inline with different fluorescent responses and can also fetch specific information by controlling the long afterglow intensity and excited light. This study not only provides a representative case of the fabrication of dual-emitting Eu³⁺-functionalized HOF-based hydrogel film but also opens the possibility of HOF-based film as intelligent luminescent materials with multifunctionalities.     

Study on power generation and Congo red decolorization of 3D conductive PPy-CNT hydrogel in bioelectrochemical system

In this paper, a polypyrrole-carbon nanotube hydrogel (PPy-CNT) with 3D macroporous structure was prepared by secondary growth method. This self-supporting material with good conductivity and biocompatibility can be directly used as anode in a microbial fuel cell (MFC). The prepared material had a uniform structure with rich 3D porosity and showed good water retention performance. The effect of the mass ratio of PPy and CNT in the hydrogel were also investigated to evaluate the electrical performance of MFC. The MFC with 10:1 PPy-CNT hydrogel anode could reached the maximum power density of 3660.25 mW/m3 and the minimal electrochemical reaction impedance of anode was 5.06 Ω. The effects of Congo red concentration, external resistance and suspended activated sludge on decolorazation and electricity generation were also investigated in the MFC with the best performance hydrogel. When the Congo red concentration was 50 mg/L and the external resistance was 200 Ω, the dye decolorization rate and chemical oxygen demand (COD) removal rate could reach 94.35% and 42.31% at 48h while the output voltage of MFC was 480 mV. When activated sludge was present, the decolorization rate and COD removal rate could be increased to 99.55% and 48.08% at 48 h. The above results showed that the porous hydrogel anode had broad application prospects in synchronous wastewater treatment and electricity production of MFC.     

High voltage and self-healing zwitterionic double-network hydrogels as electrolyte for zinc-ion hybrid supercapacitor/battery

The hydrogel electrolyte is an important part of safety and development potential in zinc-based energy storage equipment due to its inherent low mechanical strength and voltage decomposition. However, hydrogel electrolytes possess a reduced working life for zinc dendrites growth and a narrow voltage window. In this study, a hydrogel electrolyte prepares by the zwitterionic monomer [2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl) (MS) and sodium alginate (SA) alleviate these problems. The zwitterionic double-network hydrogel has good mechanical strength, inhibits the growth of zinc dendrites, enhances practicability, greatly increases the voltage window (0–2.4 V), and has self-healing properties to its rich functional groups. The assembled zinc-ion hybrid supercapacitors (ZHSs) have a high-power density of 172.33 W kg^?1 and an energy density of 88.56 Wh·kg^?1 at 0.5 A g^?1. The assembled zinc-ion battery also has good electrochemical performance. Flexible ZHSs and batteries provide power to the timer stably under different bending angles. The zwitterionic double-network hydrogel can be applied to both zinc-based supercapacitors and batteries.     

Hydrogel photocatalysts for efficient energy conversion and environmental treatment

Photocatalysts have attracted great research interest owing to their excellent properties and potential for simultaneously addressing challenges related to energy needs and environmental pollution. Photocatalytic particles need to be in contact with their respective media to exhibit efficient photocatalytic performances. However, it is difficult to separate nanometer-sized photocatalytic materials from reaction media later, which may lead to secondary pollution and a poor recycling performance. Hydrogel photocatalysts with a three-dimensional (3D) network structures are promising support materials for photocatalysts based on features such as high specific surface areas and adsorption capacities and good environmental compatibility. In this review, hydrogel photocatalysts are classified into two different categories depending on their elemental composition and recent progresses in the methods for preparing hydrogel photocatalysts are summarized. Moreover, current applications of hydrogel photocatalysts in energy conversion and environmental remediation are reviewed. Furthermore, a comprehensive outlook and highlight future challenges in the development of hydrogel photocatalysts are presented.     

Fabrication of NixCo3-xS4 hollow nanosphere as wideband electromagnetic absorber at thin matched thickness

Nowadays, transition metal sulfide (TMS), especially for spinel crystal structure (A_xB_3-xS₄), have been proved to be a promising electromagnetic (EM) absorber if been used to deal with the severe electromagnetic pollution. However, EM performance degradation and absorption layer thickness-decreasing at present remains a big challenge, owning to the poor EM attenuation ability. To overcome this barrier, herein we reported a Ni_xCo_3-xS₄ (x = 0, 0.3, 0.6, 1.0) absorber with hollow sphere structure to realize a good EM performance with a thinner matched thickness (<1.5 mm). The average sizes of these Ni_xCo_3-xS₄ distributed in 450–550 nm. The dielectric loss ability (ε'') can be boosted by tuning the molar ratio of Ni/Co, which attributes to EM performance. Additionally, hollow structure would lead to the electromagnetic multi-reflection, also benefited to EM performance. The results demonstrated that the maximum qualified absorption bandwidth (f_E) of 3.8 GHz can be achieved for the Ni_0·3Co_2·7S₄ sample when specimen thickness only equals to 1.3 mm.     

Enhancing the Yield Stress in Liquid Polydimethylsiloxane to Allow Its 3D Printing: Hydrogels as Removable Fillers

For manufacturing parts of very soft materials by liquid deposition modeling (e.g., to mimic living soft tissues), formulations of 3D-printable polydimethylsiloxane have been developed, with the aim of increasing the yield stress of the liquid and reducing the final mechanical modulus. In the present work, suspensions of solid-like hydrogel particles, which are easily 3D-printable, are prepared in order to generate yield stress, and the suspended phase is removed after manufacturing by taking advantage of the thermo-reversibility of the hydrogel behavior, resulting in porosity, which reduces the final rigidity. The reported approach is even more efficient than a previous approach based on emulsion formulations.     

Photomontage in the Present Perfect Continuous

In its first instance as art practice among the historical avant-garde, photomontage was considered indispensable for its claim to intervene in perceptual processes, stimulating a critical mode of apprehension that would redirect the viewer away from conventions of aesthetic experience and towards a lived reception of art with pronounced relevance to the sociopolitical landscape. The effect was understood as structural, that is, activated not so much by direct political content, but by the stark and shocking effects of juxtaposition. By this measure, one challenge to contemporary photomontage is clear: in a postindustrial and postdigital visual landscape dominated by the structural fragmentation of the attention economy, the ‘simultaneity of the radically disparate’ (as Peter Bürger put it) might no longer present as heterodoxy but rather threaten to sink into invisibility. Yet with the migration off-screen of the effects of electronic media, a new urgency around moving photomontage structures into physical, public space is rising in contemporary practices. Shannon Ebner’s multi-part project A Hudson Yard (2014–15) is emblematic of the new ways in which artists are manipulating photomontage as a form of fully sensory experience that gives the medium room to play critically in both virtual and material space. By constructing subtle interruptions of naturalised commercial space, A Hudson Yard activates a détournement of instrumentalised language, using structures of juxtaposition to divert the discursive surfaces of public space away from consumption and towards what could be called a public poesis.     

Controllable Fe/HCS catalysts in the Fischer-Tropsch synthesis: Effects of crystallization time

The Fischer–Tropsch synthesis (FTS) continues to be an attractive alternative for producing a broad range of fuels and chemicals through the conversion of syngas (H₂ and CO), which can be derived from various sources, such as coal, natural gas, and biomass. Among iron carbides, Fe₂C, as an active phase, has barely been studied due to its thermodynamic instability. Here, we fabricated a series of Fe₂C embedded in hollow carbon sphere (HCS) catalysts. By varying the crystallization time, the shell thickness of the HCS was manipulated, which significantly influenced the catalytic performance in the FTS. To investigate the relationship between the geometric structure of the HCS and the physic-chemical properties of Fe species, transmission electron microscopy, X-ray diffraction, N₂ physical adsorption, X-ray photoelectron spectroscopy, hydrogen temperature-programmed reduction, Raman spectroscopy, and Mössbauer spectroscopy techniques were employed to characterize the catalysts before and after the reaction. Evidently, a suitable thickness of the carbon layer was beneficial for enhancing the catalytic activity in the FTS due to its high porosity, appropriate electronic environment, and relatively high Fe₂C content.     

核壳结构Fe3O4纳米催化剂催化降解酸性废水的研究

利用静电自组装法,将羧甲基纤维素(CMC)组装到Fe3O4上得到Fe3O4@CMC,再通过自由基聚合反应将丙烯酸(AA)和丙烯酰胺(AM)接枝交联到Fe3O4@CMC上,制备出F e3O4@CMC-g-p(AA-co-AM)(Fe3O4@hydrogel)微球。利用TEM、XRD、FTIR、TGA、XPS、BET等技术对Fe3O4hydrogel微球进行了表征,并将其作为催化剂应用于类芬顿高级氧化反应中催化降解酸性红73。结果表明:Fe3O4@hydrogel仍为反尖晶石型结构,共聚物CMC-g-p(AA-c o-AM)成功包覆在Fe3O4表面,且含量为17.7%,复合微球平均粒径在10n m左右,饱和磁化强度为44.8 emu/g,BET表面积为73.5m2/g,平均孔直径为8.3nm,为介孔结构。Fe3O4@hydrogel微球对酸性染料废水有良好的催化降解性能,通过调节芬顿反应体系中初始pH值、催化剂用量以及H2O2浓度,得到反应最适条件为pH3.5、H2O210mmol/l、催化剂用量200mg/l。在此条件下3h内能达到对酸性红7399.83%以上的降解。     

Reproducible,biocompatible medical materials from biologically derived polysaccharides: Processing and Characterization

Natural polysaccharides like chitosan and dextran have garnered considerable interest in biomedical applications due to their biocompatibility, biodegradability, and nontoxicity. Nonetheless, the development of a reproducible class of medical devices from these materials is challenging and has had limited success. Chitosan and dextran are inherently variable and synthesis using these materials is prone to inconsistencies. In this study, we put forward a robust product development regimen that allows these natural materials to be developed into a reproducible class of biomaterials. First, an array of validated characterization methods (Proton Nuclear Magnetic Resonance, titrations, Ultraviolet spectroscopy, Size Exclusion Chromatography—Multi-Angle Light Scattering, Size Exclusion Chromatography—Refractive Index, and proprietary methods) were developed that allowed rigorous specifications to be set for unprocessed chitosan and dextran, chitosan and dextran intermediates, and chemically modified materials—acrylated chitosan (aCHN) and oxidized dextran (oDEX). Second, a robust and reproducible synthesis scheme involving various in-process controls was developed to chemically modify the unprocessed polysaccharides. Third, purification methods to remove byproducts and low-molecular-weight impurities for both aCHN and oDEX were developed. The study presents a viable strategy for converting variable, natural materials into a reproducible class of biomaterials that can be applied in various biomedical applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48454.