Enhanced strains of Nb-doped BNKT-4ST piezoelectric ceramics via phase boundary and domain design

A strategy that constructs the morphotropic phase boundary and manipulates the domain structure has been used to design the component of 0.96[Bi_0.5(Na_0.84K_0.16)_0.5Ti_(1-x)Nb_xO₃]-0.04SrTiO₃ (BNKT-4ST-100xNb) to enhance the strain properties for actuator application. Non-equivalent Nb⁵⁺ donor doping modulates the phase transition from the mixture of rhombohedral and tetragonal phases to the pseudocubic phase and results in the coexistence of multiple phases. Moreover, the high-resolution TEM confirms the existence of polar nano regions that contribute to the macroscopic relaxor behaviour. The size of the domains is reduced with increasing Nb⁵⁺, resulting in an enhanced relaxor behaviour. The ferroelectric-relaxor transition temperature decreases from 85 to below 30 °C, implying a non-ergodic to ergodic relaxor transition. An improved strain of 0.56% and a giant normalized strain of 1120 pm/V were achieved for BNKT-4ST-1.5Nb, which were attributed to the unique domain structure in which nanodomains are embedded in an undistorted cubic matrix. Ferroelectric, antiferroelectric, and relaxor phases coexist. As the electric field is large enough, a reversible phase transition occurs. Furthermore, good temperature stability was obtained due to the stability of the nanodomains, and no degradation in strains was observed even after 10⁴ cycles, which may originate from the reversible phase transition and dynamic domain wall. The results show that this design strategy offers a reference way to improve the strain behaviour and that BNKT-4ST-100xNb ceramics could be a potential material for high-displacement actuator applications.     

碳羟基磷灰石/钾长石复合材料对镍的吸附性能研究

以钾长石为原料,用液相合成法制备碳羟基磷灰石/钾长石吸附剂（CHAK）去除水中的重金属镍,用静态吸附实验考察了CHAK添加量、溶液初始pH、吸附时间、镍初始浓度等因素对镍去除效果的影响,并结合动力学及热力学拟合探究吸附机理。结果表明：随着CHAK量的增加,对Ni ²⁺的去除率增加,但吸附量会降低;溶液pH=6时吸附效果达到最佳;吸附时间为10 h时吸附达到平衡;Ni ²⁺溶液的初始质量浓度为50~4 000 mg/L时,CHAK对Ni ²⁺的吸附量呈先增长后平稳趋势,饱和吸附量与原材料相比增大7.1倍。动力学及热力学拟合结果显示：准二级模型更符合描述该吸附行为。ΔH>0,表明该吸附过程为吸热反应,升温有利于吸附。ΔG<0,表明该反应能自发进行。     

气候因子对湘东茶陵烟区烤烟氯、钾含量的影响

为探究气候因子对湘东烟区烤烟氯、钾含量的影响，对茶陵县2012—2018年间烤烟氯、钾含量及其与主要气候因子之间的关系进行了分析。结果表明，湘东茶陵烟区烤烟大田期平均气温23.0℃，≥10℃活动积温2 909.5℃，降雨量865.6 mm，日照时数529.5 h，属于适宜种植优质烤烟地区。2012年至2018年钾含量均处于适宜范围内，部分年度中、下部烟叶氯含量偏低。相关分析表明，上部烟叶氯含量与上部叶采收期气温、≥10℃积温、≥20℃积温显著负相关；中部烟叶氯含量与伸根期≥20℃积温显著正相关，而钾含量与下部叶采收期和大田期≥10℃积温显著正相关；下部烟叶钾含量与伸根期气温和≥10℃积温显著正相关；氯、钾含量与降雨量均无显著相关。雨水淋溶可能是造成茶陵烟区烟叶氯离子含量偏低的主要原因，而提高伸根期土壤温度可提高烟叶钾、氯含量。     

喷涂技术在烟草薄片生产中的应用研究

分析了烟草薄片原生产涂布系统的不足，对原涂布系统进行改造，新增涂布装置，将柠檬酸钾单独施加到烟草薄片上，研究了新喷涂技术对涂布液和烟草薄片质量的影响。结果表明，应用新喷涂技术时，涂布液的黏度降低了17.78%、含渣量降低了24.52%，涂布液渗透性提高；在未影响产品物理指标、化学指标、感官质量的基础上，烟草薄片中钾离子横幅分布均匀性提升了68.49%。     

Synergistic antimicrobial effect of lactocin AL705 and nisin combined with organic acid salts against Listeria innocua 7 in broth and a hard cheese

The effectiveness of antimicrobial mixtures against Listeria innocua 7, used as a L. monocytogenes surrogate, was investigated in broth and a food system. Synergistic effects were found for nisin (Nis), potassium sorbate (PS), calcium propionate (CP) and sodium lactate (SL), Nis + PS being the most effective binary mixture that exhibited listericidal activity in broth. To assess the effect of adding lactocin AL705 (AL705) to Nis + organic acid salt combinations, tridimensional isobolograms were generated. Sub-MIC combinations of the antimicrobials exerted bactericidal activity against L. innocua 7 after AL705 addition to the binary mixtures. However, when applied on Sardo cheese contaminated with L. innocua 7 (initial inoculum 4.45 ± 0.06 CFU g⁻¹), only Nis + PS + AL705 produced count reductions respect to the control, reaching 3.04 ± 0.35 CFU g⁻¹ counts after 15 days at 15 °C. Ternary combinations containing AL705 showed potential to reduce antimicrobial usages for L. innocua 7 inhibition.     

低分子量聚丙烯酸钾的合成及其应用

采用水溶液聚合法制备了低分子量聚丙烯酸钾（PAAK），并作为新型消焰剂加入单基发射药中。通过火焰原子吸收光谱法测试了PAAK中钾的含量；用乌氏黏度计测定了特性黏度；采用DSC法研究不同pH值的PAAK与硝化棉（NC）的相容性；利用充氮氧弹法对添加PAAK、硝酸钾KNO₃、硫酸钾K₂SO₄的单基发射药的燃烧残渣进行了对比研究。结果表明，合成的PAAK中，钾的质量分数为15.21%，相对分子量在3 000左右，有利于和NC均匀混合，且在中性或微碱性（pH＝7.0~7.5）的情况与NC相容性良好。与传统的KNO₃、K₂SO₄消焰剂相比，PAAK能够和NC均匀混合，制备均质透明的单基发射药；PAAK发射药的燃烧残渣最少，占发射药质量的0.18%。     

三种硫化氢吸收剂吸收效率对比及碘酸钾体系吸收条件优化研究

硫化氢具有腐蚀性与毒性，采用吸收剂吸收硫化氢气体是重要的脱硫处理方式。不同的吸收剂在吸收效率上存在较大差别。首先对比了三氯化铁体系、碘酸钾体系和碱性铁氰化钾体系三种不同硫化氢吸收剂的吸收效率。在此基础上重点优化了碘酸钾体系吸收条件参数，讨论了包含浓度、温度、pH、气体流量及时间等因素对硫化氢吸收效率的影响。并建立了四因素三水平正交试验研究较优吸收条件，得到正交试验优化吸收条件为：温度55℃，pH 6.01，硫化氢流量0.3 L·min^-1，吸收时间1 min，该条件下8%（质量）碘酸钾体系的三级吸收效率为51.56%。研究结果对硫化氢吸收处理提供了理论参考，也为间接电解法循环处理研究提供了支持。     

基于阴燃性能和钾元素含量的卷烟纸鉴别检验方法

为满足卷烟纸产品属性鉴别检验的要求，研究了卷烟纸与其他外观形态相似的薄页纸张的阴燃性能和助燃剂钾元素含量，通过对比实验分析了各类纸张的差异，并验证了方法的可行性。结果表明，卷烟纸和其他外观形态相似的普通薄页纸张的燃烧状态、阴燃长度和助燃剂钾元素含量均有明显差异，能够通过阴燃性能和钾元素含量区分卷烟纸和其他外观形态相似的普通薄页纸张。     

费托合成尾气脱碳工艺选择及试车问题分析与优化

综述了不同尾气脱碳工艺的优缺点及适用条件,指出热钾碱法是目前较适用于大型费托合成尾气中CO2脱除的方法。介绍了处理尾气规模为60万m3/h的某热钾碱脱碳工艺流程,针对该装置在投料试车过程中出现的再生系统能耗高、费托合成尾气水洗效果差、吸收塔填料易堵塞及再生气排放非甲烷总烃超标等问题,进行了原因分析,并提出了一系列工艺调整及设备改造措施。实际运行结果表明,所采取的优化措施能够有效解决上述问题。