Establishment of a color tolerance for yarn-dyed fabrics from different color-depth yarns

Yarn-dyed fabric is often woven from warp and weft yarns in the same color depth to ensure a uniform color appearance. The difference in color depth between warp and weft tends to result in the uneven color of the yarn-dyed fabric. This article aims to establish a color tolerance for yarn-dyed fabric that can be woven with a qualified color appearance but from the warp and weft yarns in different color depths. A total of 27 yarn-dyed fabric samples in three color series (red, yellow, and blue) were evaluated by using the yarn-dyed fabric from warp and weft yarns in the same color depth of 2% (on weight of fabric, owf) as the standard. Visual assessment and instrumental measurement of color were carried out to establish the color tolerance ellipse that was defined as CMC (Color Measurement Committee) color differences (2:1) of no more than 1.00. It was found that the color strengths (K/S) and color differences (ΔE_CMC(2:1)) of these fabric samples for each color series had linear relationships with the color depths of warp and weft yarns. The color tolerance ellipses indicated that, even though the warp and weft yarns had an apparent color difference, they could be woven in fabrics with relatively uniform color appearance and meet the requirements for yarn-dyed fabric. This work provided valuable insight into the production of qualified yarn-dyed fabrics from unqualified dyed yarns.     

土耳其头轧制椭圆管的孔型设计

介绍了采用土耳其头轧制椭圆管的成型辊孔型设计原则、设计步骤以及各架次成型辊参数的计算公式.以土耳其头轧制椭圆管孔型各变形边长度不变的原理作为设计孔型的依据,各架次的变型量按等差级数递减,可以得到较好几何尺寸精度和表面质量的成品椭圆管.     

炼油达标污水回用处理试验研究

采用曝气生物滤池、多介质过滤、超滤、反渗透工艺,对炼油达标外排污水进行回用处理中试试验。结果表明,曝气生物滤池对油、COD和浊度去除效果良好,超滤、反渗透膜化学清洗周期达到 2个月以上,脱盐率稳定在98％以上,产水品质达到回用要求。     

超级电容器在汽车启动中的应用

根据超级电容器的结构特性,介绍在汽车启动过程中如何利用超级电容器减小对车内其他电子设备的干扰,改善汽车的启动性能,延长蓄电池使用寿命.     

含辣椒碱的抗菌高吸水树脂的合成

以过硫酸铵、亚硫酸氢钠作引发剂，N，N’-亚甲基双丙烯酰胺作交联剂，将木薯淀粉与丙烯酸、辣椒碱在水溶液中接枝共聚，合成了具有抗菌性的高吸水性树脂。考察了添加辣椒碱形式、反应温度、反应时间、丙烯酸中和度、引发剂和交联剂用量对产物吸水性能的影响，结果表明，添加辣椒碱提取母液，在70℃下反应2．5h，丙烯酸中和度85％，引发剂和交联剂用量分别为0．6％和0．04％时，合成的吸水树脂有较高的吸水倍率。     

日本国内卫星通信应用及“超鸟”通信卫星技术概况

日本卫星通信事业发展迅速,国内各大部门积极利用通信卫星,建立支援地面通信系统的线路。文章介绍日本九个部门利用卫星通信的概况,这些部门大都有自己的固定地球站和车载地球站,实践证明在突发事件中发挥了很大作用。 日本“超鸟”通信卫星是私营通信卫星,用于日本国内卫星通信,其中x波段供防卫厅用于移动通信,卫星发射重量为2.5吨,寿命10年,三轴稳定,星上装有19套Ku波段转发器,10套Ka波段转发器和两套x波段转发器,“超鸟”卫星也是世界上最大级的通信卫星,运用了最先进的技术,本文主要介绍日本国内卫星通信及“超鸟”通信卫星技术概况。     

Visual evaluation at scale of threshold to suprathreshold color difference

Visual evaluation experiments of color discrimination threshold and suprathreshold color‐difference comparison were carried out using CRT colors based on the psychophysical methods of interleaved staircase and constant stimuli, respectively. A large set of experimental data was generated ranged from threshold to large suprathreshold color difference at the five CIE color centers. The visual data were analyzed in detail for every observer at each visual scale to show the effect of color‐difference magnitude on the observer precision. The chromaticity ellipses from this study were compared with four previous published data, of CRT colors by Cui and Luo, and of surface colors by RIT‐DuPont, Cheung and Rigg, and Guan and Luo, to report the reproducibility of this kind of experiment using CRT colors and the variations between CRT and surface data, respectively. The present threshold data were also compared against the different suprathreshold data to show the effect of color‐difference scales. The visual results were further used to test the three advance color‐difference formulae, CMC, CIE94, and CIEDE2000, together with the basic CIELAB equation. In their original forms or with optimized K_L values, the CIEDE2000 outperformed others, followed by CMC, and with the CIELAB and CIE94 the poorest for predicting the combined dataset of all color centers in the present study. © 2005 Wiley Periodicals, Inc. Col Res Appl, 30, 198–208, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20106     

超高速线路保护原理及应用

在广泛参阅了对暂态量保护的研究 ,对各种基于故障时产生暂态量的保护原理和技术特点及应用进行了分析比较 ,并指出了各种新型保护的优缺点及暂态量保护的发展趋势     

等径弯角挤压工艺(ECAEP)研究现状

等径弯角挤压是制备块状细晶材料的一种大塑性变形工艺，目前得到国内外高度重视．本文简要介绍了等径弯角挤压工艺的基本原理和变形特点，从理论上对其变形方式和机理进行了分析，并详细介绍了该工艺的应用领域。     

提高超小型铝电解电容器生产一次合格率

恰当选择原材料、确保铆接工序质量、重视工作电解液的配比、严控各工序成品率是提高超小型铝电解电容器投入产出一次合格率的关键。以１０Ｖ－４７μＦ（４ｍｍ×７ｍｍ）产品为例，投入产出一次合格率达９４％以上。