首页 | 本学科首页   官方微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  收费全文   39篇
  免费   7篇
  国内免费   1篇
综合类   3篇
化学工业   5篇
金属工艺   16篇
矿业工程   1篇
能源动力   1篇
水利工程   1篇
石油天然气   3篇
无线电   1篇
一般工业技术   5篇
冶金工业   8篇
自动化技术   3篇
  2023年   2篇
  2022年   1篇
  2021年   1篇
  2020年   2篇
  2019年   3篇
  2018年   2篇
  2016年   2篇
  2014年   3篇
  2013年   4篇
  2012年   2篇
  2011年   9篇
  2010年   1篇
  2009年   3篇
  2008年   7篇
  2007年   1篇
  2005年   2篇
  2004年   2篇
排序方式: 共有47条查询结果,搜索用时 15 毫秒
1.
从废料中回收和循环利用钌,对于实现可持续发展、节约资源和环境保护都具有重要意义。综述了从含钌废料中回收钌的工艺,氧化蒸馏法包括酸性介质和碱性介质中的氧化蒸馏、氯化法和直接氧化法、熔融-浸出-沉淀法,其他湿法浸出法包括碱性热压-还原沉淀法、碱性氧化溶解-还原沉淀和微波浸出-浊点萃取。简述了制备三氯化钌和还原制备高纯钌粉的工艺和方法。  相似文献   
2.
为解决传统甲醛化学镀铜体系环境污染及稳定性低的问题,以次磷酸钠化学镀铜体系为研究对象,采用SEM、XRD、电化学等测试方法,探讨了添加剂硫酸镍、α-α’联吡啶和马来酸对该体系的影响.结果表明:适量的硫酸镍和马来酸均能提高化学镀速并改善镀层外观质量,其适宜的质量浓度分别为0.8 g/L和10 mg/L;α–α’联吡啶能明显改善镀层外观质量,其适宜的质量浓度为10 mg/L;次磷酸钠体系的镀液稳定性能优越,加入混合添加剂在80℃下稳定时间近48 h;混合添加剂使化学镀铜阴极峰电流增大;在最佳工艺条件下镀速为5.10μm/h,获得的镀层均匀、致密,施镀20 min后背光级数达到10级.  相似文献   
3.
明胶和苯甲醛对半光亮酸性锡电沉积的影响   总被引:1,自引:0,他引:1  
目前,国内外鲜见对半光亮酸性镀锡添加剂的研究报道.采用SEM及稳态极化曲线研究了明胶和苯甲醛对半光亮酸性锡沉积层形貌及阴极极化的影响.结果表明:苯甲醛和明胶对沉积层形貌、晶粒大小及致密性均具有显著影响,不加苯甲醛和明胶或加入量太少时,镀层晶粒粗大,呈层状生长;随着加入量增大,晶粒尺寸显著细化,呈块状生长;当加入量过大时...  相似文献   
4.
采用SEM,XRD和赫尔槽等方法研究了苄叉丙酮和明胶对酸性镀锡层形貌、沉积速率和分散能力的影响。当苄叉丙酮的质量浓度较低时,镀层微粒呈柱状,结晶大小极不均匀。随着其质量浓度的增大,镀层形貌向片状转变,且晶粒尺寸显著细化。当明胶的质量浓度较低时,镀层微粒呈片状紧密地吸附在基体表面,导致结晶不太均匀。随着其质量浓度的增大,镀层晶粒进一步细化均匀。随着苄叉丙酮和明胶的质量浓度的增大,镀层沉积速率先增大后减小,适宜的苄叉丙酮和明胶的质量浓度分别为0.01 g/L和1 g/L。在适宜的条件下施镀15 min,所得镀层在(112)晶面择优取向,结晶细致均匀、光滑平整,为半光亮,镀层沉积速率和镀液分散能力分别达到4 341 mg/(dm2.h)和98.08%,可用于印刷线路板酸性镀锡。  相似文献   
5.
为解决印刷线路板传统锡-铅合金电镀工艺的铅氟环境污染问题,对硫酸亚锡-β-萘酚酸性纯锡电镀工艺进行了研究.采用赫尔槽法、人工加速腐蚀法、SEM、XRD等方法测定了镀液各组分对镀液性能及镀层质量的影响.得到该体系适宜的工艺条件:硫酸亚锡30 g/L,硫酸70 mL/L,β-萘酚0.5 g/L,明胶1 g/L,1~3 A/...  相似文献   
6.
The preparation of copper arsenite with arsenic trioxide was presented and its application in the purification of copper electrolyte was proposed. The variables of n(OH^-)/n(As), n(Cu)/n(As), NaOH concentration, reaction temperature and pH value have some effects on the yield of copper arsenite. The optimum conditions of preparing copper arsenite are that the molar ratio of alkali to arsenic is 2:1, NaOH concentration is 1 mol/L, the molar ratio of copper to arsenic is 2:1, pH value is 6.0 and reaction temperature is 20℃. The yield of copper arsenite is as high as 98.65% under optimum conditions and the molar ratio of Cu to As in the product is about 5:4. The results of the purification experiments show that the removal rate of antimony and bismuth is 53.85% and 53.33% respectively after 20g/L copper arsenite is added. The purification of copper electrolyte with copper arsenite has the advantages of simple technique, good purification performance and low cost.  相似文献   
7.
Copper electrolyte was purified by copper arsenite that was prepared with AS2O3. And electrolysis experiments of purified electrolyte were carried out at 235 and 305 A/m^2, respectively. The results show that the yield of copper arsenite is up to 98.64% when the molar ratio of Cu to As is 1.5 in the preparation of copper arsenite. The removal rates of Sb and Bi reach 74.11% and 65.60% respectively after copper arsenite is added in electrolyte. The concentrations of As, Sb and Bi in electrolyte nearly remain constant during electrolysis of 13 d. The appearances of cathode copper obtained at 235 and 305 A/m^2 are slippery and even, and the qualification rate is 100% according to the Chinese standard of high-pure cathode copper(GB/T467-97).  相似文献   
8.
郑雅杰  肖发新  吴晓华  张钦发 《贵金属》2005,26(1):30-33,42
胶体钯用于印刷电路中电子元件连接用电路板(PCB)孔的金属化,对废胶体钯中的Pd需加以回收。本文提出加热破胶和氧化破胶2种回收Pd的方法,研究了稀释比、pH值对加热破胶法回收Pd的影响,以及王水用量、反应温度和时间对氧化破胶法回收Pd的影响。结果表明,采用加热破胶法,在稀释比=3,pH=1.3,100℃条件下破胶,加入王水溶解Pd沉淀物,采用氨水调pH=9~10,生成Pd(NH3)4Cl2,再用盐酸调pH=1~1.5生成Pd(NH3)2Cl2,经水合肼还原得到Pd(99.92%),回收率为98.79%;采用氧化破胶法,加入王水后在100℃下反应破胶,经上述相同的钯回收提纯工艺得到Pd,回收率仅为60.87%。  相似文献   
9.
Novel technology of purification of copper electrolyte   总被引:11,自引:1,他引:10  
The effects of arsenic with different valence states on the purification of copper electrolyte were studied and a novel technology of purification of copper electrolyte by copper arsenite was proposed. The results show that the purification performance of As(Ⅲ) compounds is better than that of As(Ⅴ) compounds. The purification technology by copper arsenite has the advantages of simple operation, high purification performance and low cost in comparison with other technologies and its appropriate purification conditions are that copper arsenite concentration is 18 g/L, reaction temperature is 65 ℃ and reaction time is 8 h. The removal rates of Sb and Bi are 53.22% and 58.67% respectively under these conditions. The purification principle show that a kind of yellow precipitate mainly composed of arsenic, antimony ( Ⅴ ), bismuth and oxygen forms in electrolyte after copper arsenite is added, and consequently antimony and bismuth are removed from electrolyte.  相似文献   
10.
高碱性脉石低品位氧化铜矿属于"三高一低"的难处理的氧化铜矿, 其矿石具有高钙镁、高含泥量、高氧化率和低铜品位的特点。本文综述了该类矿物的资源特征、浸出方法和浸出液提铜方法。主要浸出方法包括:浮选法、氨浸法、细菌浸出等。铜氨溶液中提铜方法有萃取法、离子交换法、沉淀法等, 目前氨浸法和产氨菌浸出能有效而经济地浸出, 但氨浸法由于氨的挥发性和产氨菌浸出培养问题都有其缺陷, 因此, 笔者认为常温下低浓度氨浸-萃取或产氨菌浸出-萃取是从高碱性脉石低品位氧化铜矿石提取铜的未来发展方向之一。   相似文献   
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号