用硫酸铁铵容量法测定钛精矿中二氧化钛含量

样品在过氧化钠熔融、水浸取及盐酸酸化后，在盐酸和硫酸介质中，隔绝空气，用金属铝将钛(Ⅳ)还原至钛(Ⅲ)，以硫氰酸盐为指示剂，用硫酸铁铵标准溶液滴定。     

Ni-Mo-O催化剂中协同作用对丙烷氧化脱氢的影响

在 Ni-Mo-O体系中 ,加入 Mo O3 能极大地提高丙烷氧化脱氢制丙烯的反应活性。选用固混法、沉淀法、柠檬酸法制备了 Mo O3 过量 1 5 % (摩尔分数 )的α -Ni Mo O4催化剂 ,其中用沉淀法制得催化剂在 5 0 0℃ ,V( C3 H8) /V ( O2 ) /V ( N2 ) =1 0 /1 0 /5 0 ,反应气流量为 70 m L/min的条件下丙烷转化率可达 38.7% ,丙烯选择性达 70 .1 4 %。经 XRD,XPS,TPR表征说明 ,在含有过量 Mo O3 的催化剂中 ,α -Ni Mo O4与 Mo O3 两种晶体之间可产生微小的相互吸引 ;从而发挥协同作用 ,是提高催化剂活性     

钼酸铵生产中杂质的分离方法

简要地介绍了钼酸铵生产中有害杂质的各种分离方达及应用情况，并就各种方法的利弊作了对比说明。     

Characteristics of nitrogen and phosphorus removal in SBR and SBBR with different ammonium loading rates

Laboratory scale experiments were conducted to study the deterioration of enhanced biological phosphorus removal (EBPR) due to influent ammonium concentration, and to compare the performance of two types of sequencing batch reactor (SBR) systems, a conventional SBR and sequencing batch biofilm reactor (SBBR). Both in SBR and SBBR, the total nitrogen removal efficiency decreased from 100% to 53% and from 87.5% to 54.4%, respectively, with the increase of influent ammonium concentration from 20 mg/l to 80 mg/l. When the influent ammonium concentration was as low as 20 mg/l (C: N: P=200: 20: 15), denitrifying glycogen-accumulating organisms (DGAOs) were successfully grown and activated by using glucose as a sole carbon source in a lab-scale anaerobic-oxic-anoxic (A₂O) SBR. In the SBR, due to the effect of incomplete denitrification and pH drop, the nitrogen and phosphorus removal efficiency decreased from 77% to 33.3% when the influent ammonium concentration increased from 20 mg/l to 80 mg/l. However, in the SBBR, simultaneous nitrification/denitrification (SND) occurred, and the nitrification rate in the aerobic phase did not change remarkably in spite of the increase in influent ammonium concentration. Phosphorus removal was not affected by the increase of influent ammonium concentration.     

镀锌层上有机物无铬钝化涂层的耐蚀性

选择了一种无毒的水溶性丙烯酸树脂（AC）加入至钼酸盐、磷酸盐中（M）得到一种钝化液（ACM），对镀锌层进行钝化处理以代替有毒的铬酸盐钝化。通过盐雾试验、扫描电镜、电化学测试等手段，研究了该纯化膜的耐蚀性及耐蚀机理。结果表明，热浸镀锌层采用该无毒钝化液进行钝化，可以推迟镀锌层出现白锈的时间，其抗蚀性已接近铬酸盐钝化水平；ACM钝化膜耐蚀性的提高是由于钝化膜中的钼酸盐与丙烯酸树脂产生交联作用，抑制钝化膜裂纹的扩展，同时由于膜层中钼酸盐的缓蚀作用，提高了镀锌层的抗蚀性。     

从废钼合金催化剂中提取钼等有价元素方法的研究

ＭｏＣｏＮｉ合金料首先氧化焙烧碱浸出，滤饼再加纯碱焙烧水浸出使钼与钴镍分离，最后用萃取法分离钴镍的工艺流程，对废钼合金催化剂进行了综合回收。采用该工艺流程和生产线分别生产出合格的工业级钼酸钠、氧化钴和氧化镍。     

含钼废渣冶炼钼铁的优化试验

利用含钼废料钼酸钙为原料,采用碳还原法冶炼钼铁,通过单因素分析试验及正交试验优化得出最佳的试验条件,钼酸钙加入量应低于10%,熔炼温度为1 525 ℃,保温时间为25 min,碱度为1.3。通过XRD、SEM、EDS分析得出用此方法生产得到的钼铁合金中,钼以Mo₂C、Fe₃Mo以及Fe₃Mo₃C的形式存在,渣系为二元玻璃渣系,具有与普通玻璃相似的成分系统。经测定合金中钼的回收率大于99%,钼资源回收效益可观。     

Catalytic ozonation of NH4+-N in wastewater over composite metal oxide catalyst

Large amounts of water containing-ammonium nitrogen(NH₄⁺-N)have attracted increasing attention.Catalytic ozonation technology,involving the generation of hydroxyl radical(OH)with strong oxidation ability,was originally utilized to degrade organic-containing wastewater.In this paper,Ce/MnOx composite metal oxide catalysts prepared with different preparation conditions were used to degrade wastewater containing inorganic pollutant(NH₄⁺-N).The as-prepared catalyst features were characterized using X-ray diffraction(XRD),Brunauer-Emmett-Teller method(BET),scanning electron microscopy(SEM),energy dispersive X-ray spectroscopy(EDS),Fourier transform infrared spectroscopy(FTIR),X-ray photoelectron spectroscopy(XPS)and H₂-temperature programmed reduction(H₂-TPR)techniques.The results show that the catalyst,prepared by conditions with precipitant Na₂CO₃ and Ce/Mn molar ratio 1:2 calcined at 400℃for 3 h in pH 11.0,displays the optimal performance,with the removal rate of NH₄⁺-N and selectivity to gaseous nitrogen,88.14 wt%and 53.67 wt%,respectively.The effects of several operating factors including solution pH,initial NH₄⁺-N concentrations and scavengers were evaluated.In addition,XRD patterns of catalyst with the best performance and the comparative study on decontamination of NH₄⁺-N by various processes(O₃,catalyst and catalyst/O₃)show that the primary metal oxides are CeO₂ and MnO₂ in Ce/MnOx composite metal oxide catalysts,which have a synergistic effect on the catalytic ozonation of NH₄⁺-N,and the new phase MnO₂ plays a great role.After 5 consecutive use cycles,the degradation efficiency is declined slightly,and can still achieve better than 70 wt%over 1 h reaction.Additionally,the application of catalytic ozonation for actual wastewater on the removal rate of NH₄⁺-N was investigated.Possible mechanism and degradation pathway of NH₄⁺-N were also proposed.In a word,the application of CeO₂-MnO₂ composite metal oxide catalysts in catalytic ozonation can be regarded as an effective,feasible and promising method for the treatment of NH₄⁺-N.     

钼酸盐对碳钢缓蚀作用机理的椭圆法研究

用椭圆法通过测定表面膜层厚度,折射系数和表面复盖度研究了钼酸盐对碳钢在工业冷却水中的缓蚀作用。实验结果表明:形成具有良好保护性能的较完整致密的表面膜层的最佳钼酸盐浓度为200ppm。文中对缓蚀作用机理进行了讨论。     

钼酸铵复合缓蚀剂对LY12铝合金的缓蚀作用

采用电化学方法研究了钼酸盐、锌盐和苯并三氮唑 (BTA)对LY12铝合金在 3 5 %NaC1溶液中的缓蚀作用。结果表明 ,随着钼酸盐浓度的增大 ,缓蚀效率增大 ,达到一个最大的值后基本保持不变。钼酸盐通过抑制铝合金的阴极反应和阳极溶解实现缓蚀作用。钼酸盐与锌盐和BTA复合后 ,明显提高了对铝合金的缓蚀作用 ,表现出良好的协同效应