缓冲套对停止器挡杆防撞性能影响的测试与分析

对停止器挡杆的碰撞力进行了计算,在此基础上,对缓冲套对停止器挡杆防撞性能的影响进行测试与有限元分析。通过测试与分析确认,带聚氨酯缓冲套的停止器挡杆,碰撞力小,碰撞时间短,强度满足要求,且挡杆中铜套的变形小。在不考虑其它因素的前提下,优先选用带聚氨酯缓冲套的停止器挡杆。     

Efficiency improvement of CIGS solar cells using RF sputtered TCO/Ag/TCO thin-film as prospective buffer layer

In this paper, TCO (Transparent Conductive Oxide) incorporating ultrathin Ag intermediate film is proposed as a new buffer layer to enhance the efficiency of CIGS thin-film solar cells (TFSCs). In this regard, versatile multilayer thin-films based on ZnO/Ag/ZnO and ITO/Ag/ITO structures were deposited on glass using RF magnetron sputtering technique to determine the optoelectronic parameters of the multilayer structures. The elaborated samples were then characterized using SEM, EDS, XRD, and UV–Visible absorption spectroscopy techniques to investigate the structure morphological, optical, and electronic properties. The deposited multilayer thin-films showed amorphous-like structure and exhibited a broadband absorbance over the visible and even NIR spectrum ranges, indicating its potential application as alternative buffer layers for thin-film solar cells. In this context, TCO/Ag/TCO/CIGS solar cells have been numerically investigated using the deposited multilayer optoelectronic properties. It was revealed that the estimated efficiency of the ZnO/Ag/ZnO/CIGS-based solar cell could reach 18.5% with an open circuit voltage of 0.7 V and a short-circuit current density of 34.8 mA/cm². The performances exhibited by the investigated solar cell demonstrated that ZnO/Ag/ZnO multilayer can be used as an alternative to the conventional CdS buffer layer for developing high-performance non-toxic CIGS solar cells.     

中庭作为气候缓冲区的生态设计初探

生态可持续建筑设计越来越为人们所关注.中庭作为建筑室内与室外环境之间的过渡区,能起到气候控制和调节的积极作用.该文以气候控制为侧重点,从平面布局、剖面设计、围护结构、自然通风、自然采光等方面探讨了关于中庭生态设计的一些策略.     

Evaluation of buffer zone effectiveness in mitigating the risks associated with agricultural runoff in Prince Edward Island

To minimize the risk posed by runoff from row crops, Prince Edward Island introduced buffer legislation in 2000. The legislation mandates 10-m and 20-m buffers, respectively, for moderate sloped (i.e. < 5%) and steep sloped (i.e. > 5%) agricultural fields that border streams. Since 2001, Environment Canada has been evaluating the effectiveness of various buffer widths on operational farms in reducing toxicity and contaminant concentrations in runoff. Sample collectors, placed in 44 fields at the field edge (0 m), 10 m and at distances out to 30 m, collected overland flow following rainfall-induced runoff events. Samples were collected within 24 hours of an event and analysed for seven pesticides (endosulfan, chlorothalonil, carbofuran, linuron, metribuzin, metalaxyl, mancozeb), water quality parameters and Daphnia magna toxicity. The 10-m buffer required for moderate sloped fields was effective at reducing contaminant concentrations but not always to less than lethal concentrations to Daphnia magna. Limited data beyond 10 m for fields of both slope types precluded making recommendations on a suitable buffer width for shallow sloped fields and evaluating the effectiveness of 20-m buffers for steep sloped fields. When paired data were combined and statistically tested for all fields, the studied pesticides underwent a 52-98% and 68-100% reduction in aqueous and particulate concentrations within 10 m and 30 m, respectively. In addition, by 10 m, soluble phosphorus, nitrate-nitrogen and total suspended solids were reduced by 34%, 38% and 64%, respectively. Results suggest buffer zones on operational farms are capable of achieving contaminant reductions comparable to those reported for controlled experiments. Inconsistent siting of sample collectors beyond 10 m limited the evaluation of the effects of field slope and buffer width on buffer effectiveness on working farms. Future studies on buffer efficiency on operational farms should focus on building the data set beyond 10 m and evaluating load reductions.     

大型精密冲裁液压机缓冲装置的研究

通过分析液压机板料冲裁过程及缓冲技术,提出了自适应工况条件的几种冲裁缓冲调节装置,同时研制了缓冲作用点位置可精确调整和冲裁力能够自动跟踪的缓冲装置,较好地实现了减振和降噪功效,并成功地应用于冲裁落料液压机。同时,分析了不同结构装置的缓冲效果及应用现状,在实践生产中具有指导意义。     

履带式推土机橡胶减振器冲击特性分析

履带式推土机作业环境恶劣,行驶时会产生剧烈的振动,翻越障碍时的冲击载荷更为严重。采用有限元方法,对履带式推土机翻越障碍时悬架上安装的橡胶减振器冲击响应特性进行分析,得到橡胶减振器上钢板反作用力、振动机械能时间历程曲线和粘性损耗能时间历程曲线,并计算出结构的损耗因子。结果表明:经过橡胶减振器的衰减,整机车架所受的冲击载荷减小,冲击能量被逐渐耗散,车辆的舒适性得到改善。     

Goal-oriented dynamic test generation

ContextMemory safety errors such as buffer overflow vulnerabilities are one of the most serious classes of security threats. Detecting and removing such security errors are important tasks of software testing for improving the quality and reliability of software in practice.ObjectiveThis paper presents a goal-oriented testing approach for effectively and efficiently exploring security vulnerability errors. A goal is a potential safety violation and the testing approach is to automatically generate test inputs to uncover the violation.MethodWe use type inference analysis to diagnose potential safety violations and dynamic symbolic execution to perform test input generation. A major challenge facing dynamic symbolic execution in such application is the combinatorial explosion of the path space. To address this fundamental scalability issue, we employ data dependence analysis to identify a root cause leading to the execution of the goal and propose a path exploration algorithm to guide dynamic symbolic execution for effectively discovering the goal.ResultsTo evaluate the effectiveness of our proposed approach, we conducted experiments against 23 buffer overflow vulnerabilities. We observed a significant improvement of our proposed algorithm over two widely adopted search algorithms. Specifically, our algorithm discovered security vulnerability errors within a matter of a few seconds, whereas the two baseline algorithms failed even after 30 min of testing on a number of test subjects.ConclusionThe experimental results highlight the potential of utilizing data dependence analysis to address the combinatorial path space explosion issue faced by dynamic symbolic execution for effective security testing.     

Analysis on the interfacial properties of transparent conducting oxide and hydrogenated p-type amorphous silicon carbide layers in p-i-n amorphous silicon thin film solar cell structure

Quantitative estimation of the specific contact resistivity and energy barrier at the interface between transparent conducting oxide (TCO) and hydrogenated p-type amorphous silicon carbide (a-Si_1 − xC_x:H(p)) was carried out by inserting an interfacial buffer layer of hydrogenated p-type microcrystalline silicon (μc-Si:H(p)) or hydrogenated p-type amorphous silicon (a-Si:H(p)). In addition, superstrate configuration p-i-n hydrogenated amorphous silicon (a-Si:H) solar cells were fabricated by plasma enhanced chemical vapor deposition to investigate the effect of the inserted buffer layer on the solar cell device. Ultraviolet photoelectron spectroscopy was employed to measure the work functions of the TCO and a-Si_1 − xC_x:H(p) layers and to allow direct calculations of the energy barriers at the interfaces. Especially interface structures were compared with/without a buffer which is either highly doped μc-Si:H(p) layer or low doped a-Si:H(p) layer, to improve the contact properties of aluminum-doped zinc oxide and a-Si_1 − xC_x:H(p). Out of the two buffers, the superior contact properties of μc-Si:H(p) buffer could be expected due to its higher conductivity and slightly lower specific contact resistivity. However, the overall solar cell conversion efficiencies were almost the same for both of the buffered structures and the resultant similar efficiencies were attributed to the difference between the fill factors of the solar cells. The effects of the energy barrier heights of the two buffered structures and their influence on solar cell device performances were intensively investigated and discussed with comparisons.     

Heteroepitaxy of Ir films on silicon with a ceria/yttria stabilized zirconia buffer layer

Heteroepitaxial Ir films on Si(001) with a double ceria/yttria stabilized zirconia heteroepitaxial buffer layer were grown by magnetron sputtering. As-deposited CeO₂ films covered with {111} faceted pyramids resulted in iridium films with the [001] axis normal to the substrate plane. The buffered substrates annealed at 1115 °C have a smooth surface; Ir films on such substrates have the (111) orientation and consist of grains turned at 90° toward each other.     

Control point policy optimization using genetic algorithms

This paper describes the application of an integrated Genetic Algorithm (GA)/Discrete Event Simulation model for selecting optimum values for Critical Point Policy (CPP) hedging time and buffer size parameters. The CPP is shown to perform well, when compared with the Critical Ratio priority rule, in terms of improving service levels, particularly when subject to conditions where buffer sizes and Takt times are required to be small. The technique developed involves buffer sizes being chosen by a GA according to a constraint on the total storage space available within the system. A method is described for reducing the number of variables that the GA needs to deal with, hence, improving the efficiency of the GA optimization process. The development and application work reported also provides further understanding into how and when the CPP should be applied.