烯丙基聚烷氧基环氧醚的制备及其性能

针对烯丙基聚烷氧基环氧醚中存在催化剂和钾钠离子含量高,导致制备的三元共聚嵌段硅油反应活性差的问题,研究了在无相转移催化剂的条件下制备烯丙基聚烷氧基环氧醚的方法,表征了产物的结构,分析了制备条件对产物pH值与环氧指数的影响;以其为原料制备了三元共聚嵌段硅油,并对棉织物进行柔软整理,分析了整理后织物的亲水性、手感及物理力学性能。结果表明:当原料烯丙基聚氧乙烯醚、环氧氯丙烷和氢氧化钠的量比为1∶2.5∶1.5,冰醋酸的添加量是过量氢氧化钠的1.1倍时,产物烯丙基聚烷氧基环氧醚的环氧指数为1.77 mol/kg,pH值小于7,精制后钾钠离子含量可降低到5 μg/g以下;织物经过硅油整理后具有较好的亲水性,当整理液质量浓度为30 g/L时,毛效达到7.3 cm,手感评级达到4.7级以上,织物整体性能有所提高。     

Cyclic thermal shock resistance of h-BN composite ceramics with La2O3–Al2O3–SiO2 addition

The effects of La₂O₃–Al₂O₃–SiO₂ addition on the thermal conductivity, coefficient of thermal expansion (CTE), Young's modulus and cyclic thermal shock resistance of hot-pressed h-BN composite ceramics were investigated. The samples were heated to 1000 °C and then quenched to room temperature with 1–50 cycles, and the residual flexural strength was used to evaluate cyclic thermal shock resistance. h-BN composite ceramics containing 10 vol% La₂O₃–Al₂O₃ and 20 vol% SiO₂ addition exhibited the highest flexural strength, thermal conductivity and relatively low CTE, which were beneficial to the excellent thermal shock resistance. In addition, the viscous amorphous phase of ternary La₂O₃–Al₂O₃–SiO₂ system could accommodate and relax thermal stress contributing to the high thermal shock resistance. Therefore, the residual flexural strength still maintained the value of 234.3 MPa (86.9% of initial strength) after 50 cycles of thermal shock.     

Influence of Impurities and Oxidation on Hydroconversion of Waste Cooking Oil into Bio-jet Fuel

The influences of impurities and oxidation evolution of waste cooking oil on the preparation of bio-jet fuel via hydroconversion were studied. The hydrogenation active sites and acid sites were covered by heavy metals, sulfides, and basic nitrogen compounds, resulting in the increase of selectivity for bio-jet fuel by decreasing the selectivity of diesel, aromatics, and iso-alkanes. The effects of impurities, oxidation on the reaction pathway, and product distribution became more distinct with higher catalyst acidity. The evolution and variation of naphthalene, indan, and phenanthrene obtained from cyclic fatty acids influenced the properties of fuel or evoked the catalyst deactivation. This work will help to design new catalysts for selective conversion of waste cooking oil into bio-jet fuel.     

Enhanced ionic conductivity and thermal shock resistance of MgO stabilized ZrO2 doped with Y2O3

The present work focused on the effect of Y₂O₃ co-doping on the phase composition, microstructure, ionic conductivity and thermal shock resistance of 8 mol% MgO stabilized ZrO₂ (Mg-PSZ) electrolyte ceramics for high temperature applications. The addition of Y₂O₃ could promote the process of monoclinic-to-cubic/tetragonal phase transformation and became the metastable phase at room temperature. Meanwhile, the grain size of Mg-PSZ decreased. It was demonstrated that an appreciable increase in the ionic conductivity and compressive strength occurred on substituting MgO with Y₂O₃ in the Mg-PSZ electrolyte ceramics across the measured temperature range. Moreover, the Y₂O₃ addition could restrain the adverse effect of the cyclic thermal shock on the ionic conductivity and compressive strength of Mg-PSZ. The main reason was that the increase of the amount of monoclinic phase caused by cubic/tetragonal-to-monoclinic phase transformation by the cyclic thermal shock was restrained after the Y₂O₃ addition.     

离子交换水软化技术研究与应用进展

离子交换法是目前最常见的水软化技术之一，其基于可逆的离子交换反应将溶液中的硬度离子选择性去除，属于典型的特种分离过程。本文介绍并总结了离子交换水软化的基本原理、水软化用离子交换树脂的结构和分类、离子交换水软化技术研究和应用，并针对离子交换水软化存在的问题提出了相应的解决思路。     

Compositional effect on oxygen reduction reaction in Pr excess double perovskite Pr1+xBa1-xCo2O6-δ cathode materials

The kinetics of oxygen reduction reaction (ORR), being a prime requisite for electrode materials after the higher conductivity. Further, electrodes are observed to dissolute on reaction at triple phase boundary. However, the compositional effect on ORR is least understood. In order to inspect the ORR mechanism with substitution, a series of (1 + x) PrCoO₃ − (1 − x) BaCoO₃ (x = 0.2 to 1.0 with step of 0.2) compositions are prepared using conventional solid-state route method. The Rietveld refinement of X-ray diffractograms and specific heat curves confirms the formation of double phase comprising orthorhombic Pmmm phase corresponding to PrBaCo₂O_6-δ and Pnma phase corresponding to PrCoO₃ for x = 0.2 to 0.8 with well connected and porous microstructure. The triple phase boundary reactions suggest the formation of Co(OH)₃ along with H₂ gas on reaction of these composite electrodes with H₂O during electrochemical dissolution. However, chronoamperometric studies prove the suitability of x = 0.6 sample with higher ORR and liberation of H₂ gas at room temperature.     

Structural,electrochemical and catalytic activity of Prussian blue analogues embedded with functionalized carbon for solid state battery applications

The nanoparticles of Mn_1.5[Cr(CN)₆]∙mH₂O@Ni_1.5[Cr(CN)₆]∙nH₂O core-shell prussian blue analogues (PBA) embedded with carbon additives (PBA-C) were synthesized and characterized as electrode material for solid state battery application. The impedance spectroscopy and cyclic voltametry were used to study the electrochemical properties by adding functionalized carbon in 1:1 proportion to improve the electrical performance. The value of room temperature electrical conductivity of core-shell PBA and core-shell nanoparticles mixed with vulcan carbon (PBA-C) are found to be 1.574 × 10⁻³ and 1.92 × 10⁻³ Scm⁻¹_, respectively. Using Li₇La₃Zr₂O₁₂ (LZZO) electrolyte, single cell was fabricated with PBA-C material, and studied its charging-discharging cycles, which exhibits higher current density with stable performance for 400 cycles for time slots of 400 min. The study reveals that the PBA core-shell nanoparticles mixed with carbon (PBA-C) may be a potential candidate as an electrode material in the form of a single cell using LZZO electrolyte.     

Study on the hydrogen storage properties of a TiZrNbTa high entropy alloy

High-entropy alloys (HEAs), as a new class of metallic materials, have received more and more attention due to its excellent mechanical properties. In this study, the hydrogen absorption properties, such as hydrogen absorption capacity, thermodynamics, kinetics and cyclic properties, as well as the hydride structure of a newly designed TiZrNbTa HEA were investigated. The results showed that multiple hydrides including ε-ZrH₂, ε-TiH₂ and β-(Nb,Ta)H were found in the TiZrNbTa HEA after hydrogenation. With the increase of temperature from 293 K to 493 K, the maximum hydrogen absorption capacity decreased from 1.67 wt% to 1.25 wt% and the plateau pressure related with β-(Nb,Ta)H hydrides increased from 1.6 kPa to 14.8 kPa. The formation enthalpy of β-(Nb,Ta)H hydride was determined to be −6.4 kJ/mol, which was less stable than that of NbH and TaH hydrides. The results also showed that the TiZrNbTa HEA exhibited a rapid hydrogen absorption kinetic even at the room temperature with a short incubation time, and the hydrogen absorption mechanism was determined to be the nucleation and growth mechanism. Moreover, the hydrogen absorption capacity at 293 K decreased slowly with the cycle numbers, and remained 86% capacity after 10 cycles. Cracking occurred after hydrogen absorption and became worse with cycles.     

Electrodeposited and characterization of Ag–Sn–S semiconductor thin films

Thin film of silver tin sulfides (Ag–Sn–S) has been deposited on indium tin oxide coated glass (ITO) substrates using potentiostatic cathodic electrodeposition technique. New procedure for the growth of Ag–Sn–S film is presented. An electrolyte solution containing Silver Nitrate (AgNO₃), Tin(II) Chloride (SnCl₂) and Sodium Thiosulfate (Na₂S₂O₃)in acidic solution (pH ~2) and at temperature of the bath 55 °C were used for the growth of Ag–Sn–S thin film. Prior to the deposition, a cyclic voltammetry technique was performed in binary (Ag–S, Sn–S) and ternary (Ag–Sn–S) systems. This study was carried out to examine the behavior of electroactive species at the electrode surface. Based on these results, the cathodic applied potential was fixed at −1000 mV versus Ag/AgCl to obtain a uniform and good adhesion of ternary thin film. After that, structural, morphological and optical performances of films have been investigated. The X-ray diffraction patterns of the samples demonstrate the presence of the orthorhombic phase of Ag₈SnS₆ at applied potential of −1000 mV versus Ag/AgCl. Based on the scanning electron microscopy (SEM), it was found that the surface morphology and grain size were strongly influenced by the presence of Sn and/or Ag in the electrolyte bath. The band gaps of binaries and ternary compound are evaluated from optical absorption measurements. Band gap of Ag₈SnS₆ determined from transmittance spectra is in the range 1.56 eV. Flat-band potential and free carrier concentration have been determined from Mott–Schottky plot and are estimated to be around 0.18 V and 2.21×10¹⁴ cm⁻³ respectively. The photoelectrochemical test of Ag₈SnS₆ was studied and the experimental observations are discussed in detail.     

Vertical cyclic loading response of geosynthetic-encased stone column in soft clay

Dynamic responses of the geosynthetic-encased stone column (GESC) supported embankment under traffic loads have become a hot topic. This study investigates the responses of GESC improved ground under vertical cyclic loading. A series of laboratory tests in a designed model test tank have been carried out with different loading parameters (varied loading amplitudes and frequencies), different column dimensions (varied encasement lengths and column diameters). In the tests, the soil-column stress distribution, accumulated settlement of loading plate, excess pore water pressure in the surrounding soil and lateral bulging of the stone column are monitored. Experimental results indicate that the vertical stress on the stone column increases with the increment of encasement length, and decreases with the increment of column diameter, loading amplitude and loading frequency. The increasing stress on the surrounding soil leads to a greater accumulated settlement of the loading plate and excess pore water pressure, while the increasing stress on the column leads to larger lateral bulging of the column. Excess pore water pressure dissipates effectively through vertical and horizontal drainage channels provided by the stone column and the sand bed. The geosynthetic encasement prevents the clay from obstructing the drainage channel by filtration and guarantees the drainage effect.