脉冲化学沉积非晶态Ni—P合金原子分布函数研究

采用Ｘ射线衍射分析技术，研究了脉冲化学镀非晶态Ｎｉ－Ｐ合金的原子分布和函数，得出其短程有序原子集团的尺度为０．７５４ｎｍ，约为熔体激冷法获得的非晶态Ｎｉ－Ｐ合金短程有序畴的１／２。并利用脉冲化学沉积非晶态合金的微机制择这一结果进行了解释。     

Experimental Study about Activated Water Generated by the Electro—hydraulic Impulse Strengthening the Mechanical Performance of Concrete

On the basis of a great number of experiments, it is proved that the strength of concrete is improved greatly when it is mixed with activated water produced by the electro-hydraulic impulse.With the proper parameters, the compression strength of concrete can be increased by 45% .The reason for improvement of concrete strength by using activated water is discussed from the aspect of the structure of molecule.     

Short-term power sources for tokamaks and other physical experiments

The Compass-D tokamak is being planned to move from UKAEA Culham (England) be and reinstalled in IPP Prague (Czech Republic). An overview of Compass-D energetics is described in short. The new power sources have to be designed. Alternative solutions of power sources have been investigated. Ignitrons and mechanical breakers can be replaced by modern high-power semiconductors. With respect to the need of accumulated energy, new technologies of energy storage - supercapacitors and high-speed flywheels, not applied up to now in similar fusion projects, are characterized in comparison with traditional ones - capacitors and big motor-flywheel generators. It is shown that these technologies enhance possibilities in arrangement of power supplies for tokamaks as well as for other high-power demanding experiments with pulse length from fraction to tens of seconds.     

压水堆核电厂用全自动多螺栓四同步安装机的结构创新研究

首先在结构上创造了新型螺栓、螺母和一套崭新的安装机。在主机上去掉了精密、复杂、昂贵的机器人或机械手，改用结构简单的集成齿轮机构，以实现同步旋拧功能；运用现代流体传动与控制的理论，建立流本控制的数学模型和传递函数，从而实现了4个同步安装的效果。     

Time series analysis of wind speed using VAR and the generalized impulse response technique

This research examines the interdependence in time series wind speed data measured in the same location at four different heights. A multiple-equation system known as a vector autoregression is proposed for characterizing the time series dynamics of wind. Additionally, the recently developed method of generalized impulse response analysis provides insight into the cross-effects of the wind series and their responses to shocks. Findings are based on analysis of contemporaneous wind speed time histories taken at 13, 33, 70 and 160 ft above ground level with a sampling rate of 10 Hz. The results indicate that wind speeds measured at 70 ft was the most variable. Further, the turbulence persisted longer at the 70-ft measurement than at the other heights. The greatest interdependence is observed at 13 ft. Gusts at 160 ft led to the greatest persistence to an “own” shock and led to greatest persistence in the responses of the other wind series.     

相关函数脉冲响应法系统实时辨识

结合了相关函数法和脉冲响应法两种经典系统辨识方法原理,在随机信号干扰的情况下,设计对系统实现实时辨识的仿真软件,获得系统的非参数模型。该仿真设计中,以M序列作为输入信号,白噪声信号作为干扰信号,进行了Matlab仿真实验,讨论了M序列的幅值,采样时间和周期长度对系统辨识效果的影响,以及分析M序列的选取方法来减少系统辨识误差。     

浅述我国电液锤技术的发展与应用

通过对国外电液锤技术的引述，介绍了目前国内电液锤技术的发展与应用状况，并展望了电液锤发展前景。     

Adaptive receding horizon control for constrained MIMO systems

An adaptive control algorithm for open-loop stable, constrained, linear, multiple input multiple output systems is presented. The proposed approach can deal with both input and output constraints, as well as measurement noise and output disturbances. The adaptive controller consists of an iterative set membership identification algorithm, that provides a set of candidate plant models at each time step, and a model predictive controller, that enforces input and output constraints for all the plants inside the model set. The algorithm relies only on the solution of standard convex optimization problems that are guaranteed to be recursively feasible. The experimental results obtained by applying the proposed controller to a quad-tank testbed are presented.     

摆式电容倾角传感器动态特性分析

在分析摆式电容倾角传感器原理及传感器力学模型的基础上,导出传感器动态特性方程和传递函数.理论分析表明,通过适当选取摆的敏感材料及阻尼介质可明显改善其动态性能,采用软件补偿算法同样可提高传感器的动态性能,减少动态误差,从而提高传感器的测量效果.Matlab仿真及实验结果证实了优化方案的可行性,从而满足实际测量对传感器的动态性能要求.     

Model algorithmic control of grade change operations in paper mills

In this work, the Model Algorithmic Control (MAC) method is applied to control the grade change operations in paper mills. The neural network model for the grade change operations is identified first and the impulse model is extracted from the neural network model. Results of simulations for MAC control of grade change operations are compared with plant operation data. The major contribution of the present work is the application of MAC in the industrial plants based on the identification of neural network models. We can confirm that the proposed MAC method exhibits faster responses and less oscillatory behavior compared to the plant operation data in the grade change operations.