基于光刀图像的机器人示教纠偏方法

为了解决机器人辅助在线检测系统示教过程中效率低、人为干预多的问题,针对孔类特征,提出一种通过处理光刀图像获取机器人位姿纠正参数的方法。在该方法中,纠偏过程按照将图像光刀线调整为水平方向、将被测特征调整至图像中央、根据不同特征调整最优扫描方向3个步骤进行。根据光刀图像可以求出测量坐标系与被测特征的位姿关系,并得到该位姿与理想测量位姿的偏差。经过坐标变换即可得到在机器人基坐标系下的调整参数。另外,可利用电脑控制机器人运动,从而实现了纠偏过程的自动化。实验结果表明,该方法可将初始的示教位姿修正为理想位姿,且比传统方式效率更高。     

基于ADAMS和MATLAB的双足机器人运动轨迹规划和控制的联合仿真

相比ADAMS仿真的不稳定性,利用ADAMS和MATLAB联合仿真对双足机器人运动轨迹规划和控制设计的可靠性及高效性进行了研究。首先绘制双足机器人三维参数模型进行逆运动学分析,验证其合理性后导入ADAMS中添加约束,进行动力学仿真。基于此,在MATLAB中使用多项式插值法完成模型的步态规划。最后利用Simulink试验台建立控制系统的框图,由ADAMS输入关节角之后控制台输出关节的驱动力矩,完成双足机器人ADAMS和MATLAB的联合仿真。仿真结果显示,联合仿真相较于ADAMS仿真的波动性所获得的数据更加稳定,此法高效可行,可作为下一步设计双足机器人的控制系统电机选型的重要理论依据。     

Shared human–robot path following control of an unmanned ground vehicle

This paper considers the shared path following control of an unmanned ground vehicle by a single person. A passive measure of human intent is used to blend the human and machine inputs in a mixed initiative approach. The blending law is combined with saturated super-twisting sliding mode speed and heading controllers, so that exogenous disturbances can be counteracted via equivalent control. It is proven that when the proposed blending law is used, the combined control signals from both the human and automatic controller respect the actuator magnitude constraints of the machine. To demonstrate the approach, shared control experiments are performed using an unmanned ground vehicle, which follows a lawn mower pattern shaped path.     

Piecewise constant strain kinematic model of externally loaded concentric tube robots

This paper presents a piecewise constant strain kinematic model for concentric tube robots (CTR) in externally loaded conditions. It discretizes the pre-curved tubes comprising the robot into a finite number of pieces and involves external effects as a set of wrench vectors exerted along the robot backbone. Constant strain lets us describe the pieces with helices in which shear deformation and elongation are neglected. The resulting piecewise helix is the simplest curve that can catch the torsion of tubes that play a crucial role in kinematic behavior. This approximation transforms the conventional boundary value problem (BVP) of CTRs models into a set of nonlinear equations that drastically decreases the model resolution time. The present method uses a Lyapunov function and torsional Jacobian to ensure the distal torsion constraint consistently and, as a result, the solution’s convergence. The paper’s primary purpose is to present a fast, numerically stable, and relatively accurate kinematic model not reliant on measurement data. Experimental results on a two-tube prototype and provided for different tip loading conditions reveal maintaining a balance between adequate accuracy and reasonable running time, about 7 ms for five pieces per section, for real-time applications in the presence of external load.     

基于控制变量参数化方法的自由漂浮空间机器人路径规划研究

针对自由漂浮空间机器人传统路径规划方法对基座卫星扰动较大的问题，提出了一种基于控制变量参数化的路径规划方法。该方法将路径规划问题转化成以基座姿态扰动最小为目标函数并满足一系列约束条件的最优控制问题，并采用控制变量参数化方法进行离散化处理，将最优控制问题转化成求解非线性规划问题，并给出了完整的理论收敛性证明，从而准确地估计出自由漂浮空间机器人末端执行器的最优路径。仿真结果表明，与传统的分解加速度方法相比，该方法得到的运动路径所引起的基座卫星姿态扰动为0.104rad，相比传统方法降低了17.53%，验证了所提路径规划方法的有效性与最优性。     

遗传算法优化的线性二次型调节器控制下3-UPS并联机器人稳定性分析

通过对3-UPS并联机器人进行动力学建模与状态空间分析,基于遗传算法(GA)优化的线性二次型调节器(LQR)控制方法对其进行控制仿真,结合多体系统振动理论,并运用MATLAB软件和ADAMS软件联合仿真,分别对该并联机器人在动平台施加外部载荷、定平台施加随机振动,以及动、定平台施加复合干扰3种情况下机器人的末端稳定性进行分析。结果表明:GA优化的LQR控制下,机器人动平台质心振动的衰减时间和振动幅度都明显减小,且共振峰也明显降低,但是高频振动处的减振效果不明显;机器人动平台质心x和y方向的共振频率均保持在5 Hz左右,而z方向的共振频率却有明显的后移现象,逐渐向高频(10 Hz)靠近。该研究为分析并联机器人稳定性与工作精度提供了一定的理论基础。     

面向草莓抓取的气动四叶片软体抓手研制

农林业中果蔬的自动化采摘需求日趋强烈,末端抓手是实现无损采摘的关键。传统的末端抓手以刚性结构居多,现有的各种柔性抓手也存在抓取力不足、包覆性不佳等缺点。本文以草莓的无损采摘为研究对象,提出将草莓外部轮廓曲线作为设计曲线,设计了一种新型气动四叶片软体抓手。首先,对软体抓手的结构做仿真优化,提出一种安全地附着在目标物表面的设想。然后,在进行草莓表面的最小破坏应力试验的基础上,测试了软体抓手的末端力,验证了其实现无损抓取的可行性。再次,利用动态捕捉技术,研究了软体抓手叶面的弯曲变形规律。最后,选择使用弧线型气体通道的软体抓手进行了草莓抓取测试,结果证明了气动四叶片软体抓手可以实现草莓的无损抓取,抓取成功率达90%,破损率为2%,表明所研制的四叶片软体抓手用于草莓抓取时具有良好的稳定性和实用性,可用于草莓采摘的末端执行器。本研究也可为其他易损果蔬的采摘技术提供理论基础和技术支撑。     

钻井机器人的连续油管钻压和钻速控制模型

连续油管钻井机器人利用机身内外的钻井液压力差作为动力源，可在牵引连续油管的同时加载钻压。以钻井机器人为基础，建立连续油管钻柱动力学模型，并推导出通过钻井液排量控制钻压和钻速的单参数控制数学模型；对钻井机器人引入调速回路，建立具有调速功能的钻柱动力学模型；在溢流阀调定压力大于机身内外压差时，推导出利用钻井液排量和节流阀流通面积两种参数控制钻压、钻速的数学模型，在溢流阀调定压力小于机身内外压差时，推导出利用钻井液排量、节流阀流通面积和溢流阀调定压力3种参数控制钻压、钻速的数学模型；以11.43 cm（4.5英寸）井眼为例，对上述3种数学模型进行了分析。分析结果表明：钻压、钻速随钻井液排量的增加基本呈线性增加，在钻井液排量大于0.005 m³/s时，钻井机器人能够向前爬行，在钻井液排量大于0.005 7 m³/s时，钻头能够正常钻进；调节节流阀流通面积和溢流阀调定压力，可以在一定范围内无级调钻压和钻速；3种控制方法相结合，可以实现小排量、大钻压，及大排量、小钻压等钻井参数的控制。以控制模型为基础，针对不同井下工况建立钻进工艺的专家数据库，以钻井机器人为"大脑"，结合井下随钻测量数据就能够实现闭环控制，自动钻进。     

Hierarchical sampling optimization of particle filter for global robot localization in pervasive network environment

This paper presents a hierarchical framework for managing the sampling distribution of a particle filter (PF) that estimates the global positions of mobile robots in a large‐scale area. The key concept is to gradually improve the accuracy of the global localization by fusing sensor information with different characteristics. The sensor observations are the received signal strength indications (RSSIs) of Wi‐Fi devices as network facilities and the range of a laser scanner. First, the RSSI data used for determining certain global areas within which the robot is located are represented as RSSI bins. In addition, the results of the RSSI bins contain the uncertainty of localization, which is utilized for calculating the optimal sampling size of the PF to cover the regions of the RSSI bins. The range data are then used to estimate the precise position of the robot in the regions of the RSSI bins using the core process of the PF. The experimental results demonstrate superior performance compared with other approaches in terms of the success rate of the global localization and the amount of computation for managing the optimal sampling size.     

Visual detection and tracking with UAVs,following a mobile object

ABSTRACT

Conception and development of an Unmanned Aerial Vehicle (UAV) capable of detecting, tracking and following a moving object with unknown dynamics is presented in this work, considering a human face as a case of study. Object detection is accomplished by a Haar cascade classifier. Once an object is detected, it is tracked with the help of a Kalman Filter (KF), and an estimation of the relative position with respect to the target is obtained. A linear controller is used to validate the proposed vision scheme and for regulating the aerial robot's position in order to keep a constant distance with respect to the mobile target, employing as well the extra available information from the embedded sensors. The proposed system was extensively tested in real-time experiments, through different conditions, using a commercial quadcopter connected via wireless to a ground station running under the Robot Operative System (ROS). The proposed overall strategy shows a good performance even under disadvantageous conditions as outdoor flight, being robust against illumination changes, image noise and the presence of other people in the scene.