超宽带大功率合成器设计北大核心CSCD

在80 MHz~1 GHz频段,单个功率管输出功率能达到100 W以上,为研制输出功率400 W的功率放大器,文中设计了四路功率合成器。该合成器需要实现功率容量大、工作频带宽、体积小的设计目标。在功率容量方面,文中采用悬置带状线结构,其功率容量远远大于微带线结构;在工作频带方面,采用切比雪夫九节阻抗变换器,将工作带宽拓宽为80 MHz~1 GHz;在体积方面,文中合成器的功率合成部分采用Y型节级联实现四路功率合成,阻抗变换部分采用切比雪夫阻抗变换器进行阻抗变换,该结构相较于磁环巴伦功率合成器,不但具有损耗小、平坦度高的优点,而且通过将阻抗变换器设计成曲折的形状,进一步缩小了合成器体积。仿真与实测结果显示该合成器在80 MHz~1 GHz范围内还具有较高的平坦度,合成效率可达90%以上。     

Application of artificial neural network method to predict the breakage properties of PGE bearing chromite ore

In the present investigation, systematic grinding experiments were conducted in a laboratory ball mill to determine the breakage properties of low-grade PGE bearing chromite ore. The population balance modeling technique was used to study the breakage parameters such as primary breakage distribution (B_{i, j}) and the specific rates of breakage (S_i). The breakage and selection function values were determined for six feed sizes. The results stated that the breakage follows the first-order grinding kinetics for all the feed sizes. It was observed that the coarser feed sizes exhibit higher selection function values than the finer feed size. Further, an artificial neural network was used to predict breakage characteristics of low-grade PGE bearing chromite ore. The predicted results obtained from the neural network modeling were close to the experimental results with a correlation of determination R² = 0.99 for both product size and selection function.     

离线式带钢双面翻转检查站方案设计及实践

针对某酸轧机组检查站穿带困难、检查效率低、产生废品多、故障率高的问题,开发了一种离线式带钢双面检查站。该检查站新增了带钢翻转装置,将在入口分切剪处完成定尺剪切的带钢试样由两侧压板夹紧,中间可升降皮带机落下,翻转装置将带钢试样张紧,并翻转90°或者180°,实现带钢的双面检查。皮带机两侧布置有可升降、可横移的活动操作平台,检测人员站在平台上对带钢进行打磨检查,可同时对带钢上下表面进行检测。由于缩短了带钢的传输距离,有效减少了其他擦划伤的影响,提高了带钢表面质量检测准确性。     

A double laser filtering approach to vibration noise rejection for hot-rolled strip flatness measurement

This paper proposes a new filtering method based on the Kalman filtering algorithm for hot-rolled strip flatness measurement system. The system involves processing slowly changing signal, which can be considered as a bounded random process, and its model parameters are completely unknown. The noise rejection strategy in double lasers can generate a compensation signal. Since the initial and accumulative error would lead to negative filter effect or even cause divergence, Kalman filter is integrated to effectively deal with the initial error and enhance convergence. In this setting, the noise rejection strategy is used as a prediction model to constitute a similar Kalman filter. The correlated error caused by measurement error is coped with by a compensation model based on the feature of correlated error to enhance the filter effect. Both theoretical analysis and simulations show that the new algorithm has a better filter effect than the traditional Kalman filtering algorithm for the system.     

An improved method for the hot strip mill production scheduling problem

In most research on the hot strip mill production scheduling problem (HSMPSP) arising in the steel industry, it is accepted that a schedule with lower penalty caused by jumps of width, hardness, and gauge will result in lower roller wear, so it is regarded as a better schedule. However, based on the analysis of production processes, it is realised that rolling each coil also cause roller wear. In order to assessing the roller wear associated with production scheduling more precisely, it is necessary to consider it as another factor besides those jumps, especially when complicated constraints are involved. In this paper, an improved method is proposed to quantify the expected wear of the rollers done by those jumps and rolling processes. Then the HSMPSP whose objective is to maximise the total length of all scheduled coils is formulated as a team orienteering problem with time windows and additional production constraints. A heuristic method combining an improved Ant Colony Extended algorithm with local search procedures dedicated to HSMPSP is developed. Finally, computational results on instances generated based on production data from an integrated steel mill in China indicate that the proposed algorithm is a promising solution specific to HSMPSP.     

1 200 MPa级冷轧先进高强钢轧制稳定性的分析及控制

针对1 200 MPa级冷轧先进高强钢轧制不稳定问题,对热轧原料组织性能均匀性、冷轧压缩比、冷连轧机组轧制策略等进行了分析。结果表明,热轧工序投入边部加热器,采用分段冷却等手段,可有效降低热轧原料头尾部组织性能差异,保证通卷性能均匀,进而保证通卷轧制过程稳定;通过优化冷连轧机组压缩比,可有效降低材料本身的加工硬化强度,进而避免连轧机组后面机架的轧制超负荷情况;通过优化冷连轧机组轧制策略,可保证轧制过程中各机架均匀变形,避免出现轧制力差异较大的情况,进而保证轧制过程稳定。采用上述措施,1 200 MPa级冷轧先进高强钢轧制力控制在约15 000 kN,厚度精度控制在±0.06 mm以内,可保证该级别高强钢的稳定轧制。     

Regression analysis of surface roughness and micro-structural study in rotary ultrasonic drilling of BK7

Ceramic materials have tremendous demand in manufacturing sectors. However, poor machinability impedes their widespread applications on an industrial scale. BK-7 falls in the same category and is normally processed by ultrasonic machining. But nowadays rotary ultrasonic machining is overtaking the ultrasonic machining for processing difficult to cut materials because of its superlative material removal mechanism. Current study aims to improve the surface quality of BK7 by studying the effect of input factors on surface roughness during rotary ultrasonic machining. Response surface methodology has been used to observe the effect of input variables ― spindle speed, feed rate and ultrasonic power ― on surface roughness (SR). Thereafter, central composite design was employed to estimate the regression coefficients of quadratic model for surface roughness. Fitness of developed quadratic model was checked by ANOVA test, which also revealed that all the model terms of input factors were significant except feed and speed interaction. Feed has the maximum impact over surface roughness descended by moderate impact of power and spindle speed. The study was further reinforced on observing the surface integrity of processed surfaces using scanning electron microscopic images. Mixed flow of material was observed to occur at lower feed rate and higher levels of rpm and ultrasonic power.     

飞行时间二次离子质谱对矿物表面性质的研究

随着易选矿石的逐步枯竭,低品位、嵌布粒度细等难选矿石的开发利用已成必然趋势。目前,矿物加工已经从实践生产阶段发展到了理论研究指导实践生产的阶段,因此具有分辨率高、信息量大、灵敏快速以及样品用量少等特点的矿物表层研究方法来支撑理论研究是必不可少的。飞行时间二次离子质谱法(TOF-SIMS)是近年来在矿物加工中使用较多的一种矿物表面化学分析方法,具有表面质谱、化学成像、深度剖析、快速灵敏及数据精准的优点,因此总结归纳了近年来TOF-SIMS在矿物加工中应用取得的成果,以期为学者提供可靠的理论依据及技术支持。     

Effect of grinding-induced cyclic heating on the hardened layer generation in the plunge grinding of a cylindrical component

This paper discusses the effects of the grinding-induced cyclic heating on the properties of the hardened layer in a plunge cylindrical grinding process on the high strength steel EN26. It was found that a multi-pass grinding brings about a uniform and continuous hardened layer along the circumference of the cylindrical workpiece. An increase of the number of grinding passes, leads to a thicker layer of hardening, a larger compressive residual stress and a deeper plastic deformation zone. Within the plastic deformation zone, the martensitic grains are refined by the thermo-mechanical loading, giving rise to a hardness of 12.5% higher than that from a conventional martensitic transformation. The coupled effects of heat accumulation and wheel wear in the multi-pass grinding are the main causes for the thickening of the hardened layer. A too small infeed per workpiece revolution would result in insufficient grinding heat, and in turn, bring about an undesirable tempered hardened layer and a reduction of its hardness.