激光打孔技术在光伏背板玻璃上的应用

双玻光伏组件以其抗PID性强、防隐裂、防水汽透过、抗蜗牛纹、可靠性优异、轻量化等诸多优点,在晶硅太阳能组件市占比逐步提高。双玻光伏组件用背板玻璃一般需要预留出线孔,光伏背板玻璃的出线孔主要有两种打孔方式:金钢钻上下同步钻孔的模式和激光打孔。激光打孔以其易维护、可异形孔加工、效率高、生产成本低等优势得到各大玻璃厂的认可。通过分析在实际生产中激光打孔出现的打孔缺陷问题,提出了改善措施,有助于工厂的降本增效。     

基于VR技术的智能变电站运行仿真培训系统

为了更加真实、直观地呈现智能变电站的运行整体结构,构建基于VR技术的智能变电站运行仿真培训系统。该系统通过5个模块协同完成智能变电站运行仿真培训,结合实际变电站的设备情况,采用二维纹理映射方法完成变电站设备仿真建模;系统利用虚拟现实交互模块呈现培训场景,参与培训人员能够通过人机交互设备,实现场景漫游和相关培训内容操作。测试结果表明:该系统能够较好地模拟出智能变电站的实际运行情况,参与培训的人员可以身临其境地完成整个变电站的巡视,更真实、直观地呈现智能变电站的整体状态。     

产教融合背景下高职特色专业群“平台+模块”课程体系建设研究

In view of the problems in the construction of characteristic professional groups in higher vocational colleges, the professional group of "intelligent manufacturing" is taken as the research object, and the "platform + module" suitable for the development of the industry will be constructed according to the content of the vocational ability planning courses of the post group. The curriculum system establishes the framework of professional groups, and explores and forms a strategic study to optimize and integrate professional group resources.     

基于LDRA TBrun软件集成测试的研究

Integration testing is to ensure that each functional module is correct and performs well, so that these modules can be as- sembled together to work well. The manual testing method of the tester alone cannot effectively evaluate the tested aviation soft- ware, and the use of advanced automated testing tools can overcome these difficulties. This paper introduces the method and process of integration testing with Testbed suite tool TBrun through a practical test project.     

水电站大型竖井施工安全风险控制措施研究

竖井是大型水电工程中广泛采用的重要建筑物,但竖井的传统施工方法存在施工程序复杂、人工劳动强度大、施工效率不高等特点,同时还存在较大的安全风险。通过对杨房沟水电站大型竖井施工过程的研究,总结出精细化控制爆破、小溜渣井施工方式,同时也设计了一套用于运输的综合提升系统。采用上述创新方法不仅减少了繁琐的施工程序,降低了安全施工风险,而且大量采用机械化手段进一步提高了施工效率,确保了该工程竖井施工的安全风险可控。相关措施可为类似工程的竖井施工提供较好的借鉴作用。     

Extensive evaluation and classification of low-cost dust sensors in laboratory using a newly developed test method

An extensive evaluation of low-cost dust sensors was performed using an exponentially decaying particle concentration. A total of 264 sensors including 27 sensors with light-emitting diodes (LEDs) and 237 sensors with laser lighting sources were tested. Those tested sensors were classified into 4 groups based on the deviation from the reference data obtained by a reference instrument. The response linearities of all the tested samples for PM₁, PM_2.5, and PM₁₀ were in excellent agreement with the reference instrument, except a few samples. For the measurements of PM₁ and PM_2.5, the lighting source, that is, LED or laser, did not show any significant difference in overall sensor performance. However, LED-based sensors did not perform well for PM₁₀ measurements. The 32, 24, and 16% of all the tested sensors for PM₁, PM_2.5, and PM₁₀ measurement, respectively, are in the category of Class 1 (reference instrument reading ± 20%) requirement. The performance of the low-cost dust sensors for PM₁₀ measurement was relatively less satisfactory.     

冲击地压高应力回采巷道支护改革技术的研究与应用

通过改变传统巷道支护理念,优化巷道支护方式和工艺,解决冲击区域高应力与强卸压大蠕变巷道的主动支护技术难题,规范巷道支护材料、施工机具和巷道支护效果监测,降低巷道翻修率,保障矿井采掘接替正常,为巷道支护提供参考和理论依据,同时进一步完善冲击区域煤层开采巷道支护技术,也为煤炭资源的开采最大化和经济效益最大化提供科学依据和技术保障。     

突出矿井顶层综采工作面采空区瓦斯分源抽采综合技术研究

针对九里山矿14141综采工作面高位抽采钻孔及自主加工上隅角封堵模块配合埋管抽放的立体式抽放方式，对工作面高位抽采钻孔及上隅角埋管抽放的瓦斯抽采管路系统进行改造，高位抽采钻孔由地面南风井瓦斯抽采泵站进行抽采，上隅角埋管抽放由西风井地面瓦斯抽采泵站进行抽放，从而达到以最少投入，获得最佳的采空区瓦斯治理效果，该技术的应用有效地解决了回采工作面上隅角瓦斯超限问题。