Pressure infiltration of boron nitride preforms with molten aluminum

The infiltration of compacted cubic BN (cBN) with molten aluminum has been investigated as a potential route for a cheap and easy method of manufacturing cBN/metal composites. CBN compacts have been infiltrated with molten Al at a temperature between 670 and 800 °C and pressure of 15 MPa in vacuum. At these temperatures no pronounced interactions between hexagonal and cubic BN with Al was observed, allowing the complete infiltration of cBN with 12 μm mean grain size. After infiltration at 800 °C, the temperature was increased without pressure to convert aluminum into borides and AlN. The hardness of the resulting materials depends on the content of hexagonal, cubic BN and the rate of conversion of Al into borides and AlN. The infiltration height of less than 1 mm obtained from infiltrating the 3 μm cBN powder green compacts gave a hardness of 22.0 ± 0.6 GPa after heat treatment.     

定量电子晶体学硼对Ni3Al的电荷密度分布的影响

阐述了定量电子晶体学测定晶体电荷密度分布的基本原理和方法，不足之处和改善途径。以硼对Ｎｉ３Ａｌ的电荷密度分布的影响为实例，介绍了定量电子晶体学在研究晶体电子结构方面的应用前景。     

B2O3/TiO2-ZrO2催化剂上环己酮肟的气相Beckmann重排反应

用共沉淀法制备了TiO2-ZrO2复合氧化物载体，BET，DTA，XRD表征结果表明，该复合载体具有较大的比表面和较好的热稳定性，对于环己酮肟气相Beckmann重排反应制己内酰胺，用复合载体制备的B2O3／TiO2-ZrO2催化剂，比分别以TiO2,ZrO2为载体所制备的B2O3/TiO2和B2O3／ZrO2催化剂具有更高的活性和选择性，实验表明，催化剂表面中等强度的酸位是环己酮肟气相Beckmann重排反应的有效活性中心。     

注硼中子寿命测井技术在华北油田的应用与发展

注硼中子寿命测井技术是近几年发展起来的一项用于测量开发井水淹状况 ,分析层间油水关系 ,根据其结果采取合理措施降水增油的新技术。该技术在华北油田推广应用以来 ,取得了较好的效果。在应用过程中 ,不断优化选井原则 ,优选注硼参数和测注工艺 ,突出综合对比解释 ,进一步提高了工艺技术应用的合理性、准确性以及解释结果的吻合性 ,一定程度上丰富了注硼中子寿命测井理论 ,促进了该项技术的完善与提高     

溶质原子在再结晶运动晶界上偏聚的研究

Ｂ~（１０）（ｎ，α）Ｌｉ~７裂变反应的径迹显微照相技术被用来研究含硼Ｆｅ－３０％Ｎｉ合金高温热变形再结晶过程中硼在晶界上的偏聚行为，实验表明，含硼Ｆｅ－３０％Ｎｉ合金１０００℃热变形２０％再结晶过程中，运动晶界前方发生硼偏聚而后方发生贫硼现象，而在静止晶界上看不到硼偏聚，随着再结晶新晶粒的长大，运动晶界上的硼偏聚变弱。本文提出，可以用晶界对溶质原子热运动散射的量子理论来解释溶质原子在运动晶界上的偏聚现象。     

硼预淀积对自组织生长Ge量子点尺寸分布的影响

研究了以不同B2H6流量预淀积硼对UHV/CVD自组织生长Ge量子点尺寸分布的影响。在适当的生长条件下,得到了尺寸分布很窄的均匀Ge量子点,用AFM对量子点的形貌进行观察,Ge量子点尺寸的涨落小于±3%,量子点的水平尺寸和高度分别为60nm和10nm,密度为8×109cm-2。实验结果表明,通过预淀积硼表面处理,可以得到尺寸分布很窄的量子点,以满足量子点光电器件方面应用的要求。     

硼泥在混合砂浆中的应用

介绍硼泥混合砂浆的技术性能，通过试验，证明了硼泥在混合砂浆中的作用。     

辽东含硼岩系条痕状角闪混合岩特征及其找矿意义

痕状角闪混合岩与其围岩变（浅）粒岩为渐变过渡关系.并呈现一些特殊的结构构造.其岩石化学成份变化波动性较大,说明岩石化学成分不稳定,与矿化含量的不稳定性一致.其特殊的岩石化学组成显示为混合岩特征.条痕状角闪混合岩石稀土总量ΣREE的平均值为207.18 ppm;（Ce/ΣY平均值为3.25;La/Yb为平均值为 6.48,δEu平均为 0.48,Eu/Sm平均值为0.16.这些特点与里尔峪组的各种变（浅）粒岩相似,是层状混合花岗岩.     

硼矿石代替硼铁生产硼铸铁气缸套

根据冲天炉的冶金还原反应原理,在炉后加入廉价的硼矿石,代替昂贵的硼铁合金生产气缸套,取得显著的经济效益。     

Boron Nitride Nanosheets Strengthened PVA/Borax Hydrogels with Highly Efficient Self-Healing and Rapid pH-Driven Shape Memory Effect

Self-healing hydrogels often possess poor mechanical properties which largely limits their applications in many fields. In this work, boron nitride nanosheets are introduced into a network of the poly(vinyl alcohol)/borax (PVA/borax) hydrogels to enhance the mechanical properties of the hydrogel without compromising the self-healing abilities. The obtained hydrogels exhibit excellent mechanical properties with a tensile strength of 0.410 ± 0.007 MPa, an elongation at break of 1712%, a Young's Modulus of 0.860 ± 0.023 MPa, and a toughness of 3.860 ± 0.075 MJ m⁻³. In addition, the self-healing efficiency of the hydrogels is higher than 90% within 10 min at room temperature. Benefiting from the excellent self-healing properties, the shapeability of the hydrogel fragments is observed using different molds. In addition, the hydrogels display rapid pH-driven shape memory effects and can recover to their original shape within 260 s. Overall, this work provides a new approach to hydrogels with integrated excellent mechanical properties, self-healing abilities, and rapid pH-driven shape memory effects.