Structural,electrical, and linear/nonlinear optical characteristics of thermally evaporated molybdenum oxide thin films

Homogeneous thin films of Molybdenum oxide (MoO₃) were grown on quartz and glass substrates using the thermal evaporation method. XRD results showed that the MoO₃ powder has a polycrystalline structure with an orthorhombic crystal system whereas the MoO₃ thin films have amorphous nature. SEM images showed that the MoO₃ thin films have a nearly uniform surfaces with worm-like shape grains. The film thickness influences on the linear and nonlinear optical characteristics of MoO₃ thin films that were examined using spectrophotometric measurements and from which, the linear optical constants of the MoO₃ thin films were estimated. The electronic transition type was determined as a direct allowed one. The values of the optical band gap were obtained to be in the range of 3.88–3.72 eV. The dispersion parameters, third-order nonlinear optical susceptibility, and the nonlinear refractive index of the MoO₃ thin films were determined and interpreted in the light of the single oscillator model. The temperature dependence of the DC electrical conductivity and the corresponding conduction mechanism for the MoO₃ films were investigated at temperatures ranging from 303 to 463 K.     

火花放电原子发射光谱类型标准化校正方式的探讨

在国内,火花放电原子发射光谱分析广泛使用类型标准化进行方法校正。在国外,标准和文献中鲜见使用此方法的相关论述。类型标准化主要采用平移校正和转动校正两种方式,哪种方式更加合理也鲜见报道。国外设备类型标准化的默认设置优先采用转动校正方式,相关国内标准对最优校正方式的规定尚不明确,此默认设置的合理性有待探讨。实验选用低合金钢20CrNi2Mo、R407标准样品和不锈钢317L、0Cr18Ni9标准样品,引用国内相关标准,以正确度临界差为评判依据,模拟类型标准化样品和待测样品“十分接近”和“接近”两种情况下平移校正和转动校正的数据正确度。经数据统计分析,平移校正分析结果均满足要求,转动校正结果在“接近”情况下部分元素不满足要求。结合相关国家标准中元素含量范围和精密度数据进行分析,通过计算允许最大偏倚量并制作曲线图方式展开分析,得出如下结论:在满足文中类型标准化控制要点前提下,分析设置更适合于采用平移校正方式。     

Various density light field image coding based on distortion minimization interpolation

In recent years, the light field (LF) as a new imaging modality has attracted wide interest. The large data volume of LF images poses great challenge to LF image coding, and the LF images captured by different devices show significant differences in angular domain. In this paper we propose a view prediction framework to handle LF image coding with various sampling density. All LF images are represented as view arrays. We first partition the views into reference view (RV) set and intermediate view (IV) set. The RVs are rearranged into a pseudo sequence and directly compressed by a video encoder. Other views are then predicted by the RVs. To exploit the four dimensional signal structure, we propose the linear approximation prior (LAP) to reveal the correlation among LF views and efficiently remove the LF data redundancy. Based on the LAP, a distortion minimization interpolation (DMI) method is used to predict IVs. To robustly handle the LF images with different sampling density, we propose an Iteratively Updating depth image based rendering (IU-DIBR) method to extend our DMI. Some auxiliary views are generated to cover the target region and then the DMI calculates reconstruction coefficients for the IVs. Different view partition patterns are also explored. Extensive experiments on different types LF images also valid the efficiency of the proposed method.     

渗流作用下新型装配重力式挡土墙有限元分析

为研究渗流作用下新型装配重力式挡土墙应力变化及墙体排水通道对墙后土体固结的影响,采用ABAQUS进行有限元分析,有限元分析结果与模型试验结果相吻合,证明该模型的合理性。在此基础上研究渗流作用下墙体应力变化趋势及墙体排水通道对墙后土体固结效果的影响。研究结果表明:横向排水通道对墙后土体固结效果的影响优于纵向排水通道对土体固结效果的影响,墙体底部横向排水通道的影响作用最显著;渗流作用下墙体应力由上往下呈先增大后减小的趋势,墙体下部所受最大水平剪应力最大。     

面向噪声丢包感知的无线网络拥塞算法

针对无线网络链路干扰大、误码率高等特点，以及TCP Westwood算法（TCPW）存在估算带宽时过度依赖包的反馈，缺乏区分传输过程中丢包类型的缺点等问题，提出一种TCPW拥塞控制优化算法--TCPW-F。该算法利用发送速率等构建拥塞因子[F]作为判断丢包类型的依据，同时对判定发生噪声丢包时的拥塞窗口进一步调整，避免噪声丢包引起的窗口下降，提高该情况下窗口的发送效率。仿真结果表明，TCPW-F算法在时延性能方面表现更优，单位时间抖动趋于稳定的速度更快。在同一信道带宽下增大包生成速率，改进算法的实时吞吐量明显高于原算法，具备一定的噪声丢包感知能力，无线网络的TCP传输质量获得较大改善。     

广西箭猪坡矿床首次发现的石英脉型锡矿体特征及 锡石微量元素地球化学意义

箭猪坡矿床是丹池成矿带南端的一个以铅锌锑为主的矿床，随着2012-2014年在箭猪坡矿床钻孔中石英脉型锡矿体的首次发现，打开了箭猪坡矿床新的找矿空间。新发现的锡矿体矿石矿物组合类型主要为锡石+闪锌矿+脆硫锑铅矿+黄铁矿+石英及锡石+脆硫锑铅矿+石英+方解石。箭猪坡矿床锡石呈自形-半自形粒状，锡石粒径多在0.1～0.2mm，少数0.02～0.05mm，分布在含硫化物的石英脉裂隙中。物相分析显示箭猪坡矿床锡主要赋存在锡石中，锡石物相占83.33%～100%。阴极发光（CL）图像显示箭猪坡矿床中的锡石经历了两期结晶作用：早期锡石（Ⅰ）和晚期锡石(Ⅱ），早期锡石CL荧光亮度较小，呈暗灰色至黑色；晚期CL荧光亮度较大，呈白色至浅灰色。锡石单矿物SnO2含量91.623%～96.288%，平均94.03%，杂质主要有Fe、W、In等，其中FeO含量0.02%～0.52%，WO3含量多在0.02～1.34%，In2O3含量在0.476%～0.954%，Sn与FeO、In2O3呈负相关，锡石中FeO、WO3、Ta2O5、Nb2O5、MnO含量指示箭猪坡锡形成于中低-中温热液环境，成矿热液来源于高度分异演化的花岗质岩浆。通过与大厂矿田西矿带上部脉状锡矿体的类比分析，具有相似的成矿条件及矿物组合，推测所揭露到的脉状锡矿（化）体相当于西矿带上部脉状锡矿（化）体，而下部的网脉状、似层状锡矿体尚未揭露到，由此预测箭猪坡矿床深部找矿空间及找矿潜力大。     

Solution combustion synthesis of cerium oxide nanoparticles as corrosion inhibitor

In this study, combustion synthesis of cerium oxide nanoparticles was reported using cerium nitrate hexahydrate as starting material as well as urea, glycine, glucose, and citric acid as fuels. The influence of fuel type on structure, microstructure, band gap, and corrosion inhibition was investigated. X-ray diffraction (XRD) patterns and scanning electron microscopy micrographs showed that CeO₂ nanoparticles with different morphologies were obtained depending on the fuel type. Microstructural changes from unreacted gel to sponge-like morphologies were resulted by varying the fuel type from urea, glycine, and glucose to citric acid. In addition to Ce–O bonds, Fourier transform infrared analysis showed carbon bonds of carbonaceous compositions from incomplete combustion which were declined during combustion reaction. Furthermore, corrosion analyses showed that samples synthesized using urea fuel released the most Ce⁺⁴ ions and could have better protection than other samples.     

聚乙烯醇/牛I型胶原支架材料的制备及评价

研究了一种聚乙烯醇(PVA)和胶原(COL)复合支架材料的制备方法。采用氨基硅烷对PVA海绵表面进行了氨基化修饰后，通过戊二醛溶液交联牛Ⅰ型胶原(COL)，最后通过赖氨酸溶液封闭，获得一种PVA/COL复合支架材料。采用扫描电镜(SEM)、X光电子能谱仪(XPS)、傅里叶红外光谱(FT-IR)等手段对支架材料的理化性能进行表征，并通过细胞实验对支架材料的生物学性能进行评价。结果表明，经过COL修饰的PVA孔隙率为21.33%，平均孔径为168.68 ?m且均匀分布，支架材料接触角为20.03°。对支架材料的生物学评价结果表明C3A细胞在复合材料上黏附良好，优于PVA组；CCK-8增殖检测结果表明细胞在复合材料上呈增殖生长趋势，与对照组PVA相比差异显著(P?0.01)。将PVA和COL复合制备得到的支架材料具有良好的理化及生物学特性，具有广阔的应用前景。     

Control Model for Large‐Sized Gantry Type Linear Motor Slider

At present, many industrial carrier devices utilize linear motor sliders. However, a heavier load requires a linear motor (which is an example of a direct drive device) to get higher power, compared with a rotary motor with a ball screw slider (which is an example of an indirect drive device). In order to obtain higher power at a lower cost, a linear slider with multiple motors can be utilized, for example, a gantry type linear motor slider. Moving the gantry type slider requires two linear motors that are set up in parallel to enable synchronization control. Some conventional synchronization control methods have been proposed for the parallel twin linear slider; however, a large‐scaled gantry type linear motor slider has two unique problems: mechanical distortion caused by the limitations of installation environment and coupling caused by joints with low stiffness. This paper proposes a control model to solve these problems, and an identification method of each parameter. Furthermore, the effectiveness of the control model is verified by comparison with simulation results and experimental results.