Analysis and proposition of limiting current density measurement protocol

Limiting current density at different temperatures, backpressures, and balance gases can be used to separate molecular diffusion resistance, Knudsen diffusion resistance and local transport resistance of membrane electrode assembly (MEA). However, the measurement of limiting current density has no unified protocol. The diverse choices in the literature, either in the control of current or voltage or in the atmosphere like relative humidity and O₂ concentrations, make it difficult to compare the results and identify the true bottleneck hindering the mass transport. In this work, the current-voltage curves obtained by current scanning/stepping and voltage scanning/stepping methods under dilute O₂ of different concentrations and a wide range of relative humidity were measured and analyzed systematically. It is found that the voltage stepping method is superior to the other three ways of control for the reliable determination of the limiting current density. Aided with simultaneous electrochemical impedance spectroscopy measurement, the limiting current density can be determined with pinpoint accuracy. When the limiting current density is just used to qualitatively evaluate different MEA, the voltage scanning method can be used instead for its high time efficiency. The selection of the atmosphere also plays an important role in suppressing the distortion from excessive water and reducing the spurious contribution from proton conduction resistance. It is found that O₂ concentrations at 0.5 vol% and relative humidity at 90% can give the best estimation of O₂ transport resistance in membrane electrode assembly.     

Digital Extraction Column: Measurement and Modeling Techniques

The digitization of extraction columns requires a profound knowledge of the present hydrodynamics/mass transport interaction as well as appropriate measurement techniques for the detection of relevant input and target values. In this article, the different techniques for droplet size distribution as well as concentration determination are presented and new methods for online evaluation are discussed. In combination with the simulation of droplet size, holdup and solute concentration distribution, an online-capable process tool for controlling and optimizing extraction columns will be obtained.     

Survey on Neuro-Fuzzy systems and their applications in technical diagnostics and measurement

Both fuzzy logic, as the basis of many inference systems, and Neural Networks, as a powerful computational model for classification and estimation, have been used in many application fields since their birth. These two techniques are somewhat supplementary to each other in a way that what one is lacking of the other can provide. This led to the creation of Neuro-Fuzzy systems which utilize fuzzy logic to construct a complex model by extending the capabilities of Artificial Neural Networks. Generally speaking all type of systems that integrate these two techniques can be called Neuro-Fuzzy systems. Key feature of these systems is that they use input–output patterns to adjust the fuzzy sets and rules inside the model. The paper reviews the principles of a Neuro-Fuzzy system and the key methods presented in this field, furthermore provides survey on their applications for technical diagnostics and measurement.     

Remaining useful life prediction for degrading systems with random shocks considering measurement uncertainty

Degradation data have been widely used for the remaining useful life (RUL) prediction of systems. Most existing works apply a preset model to capture the degradation process and focus on the degradation process without shocks or constant shock effects. More generally, the actual degradation path is unobservable due to the existence of measurement uncertainty, which interferes with the determination of the degradation model. Besides, the effect of random shocks is usually fluctuating. Given these problems, a general degradation model with the random shock fluctuant effects considering the measurement uncertainty is first developed to describe the degradation process, and a two-step approach combining the arithmetic average filter and the Bayesian information criterion is adopted to identify the degradation path. Subsequently, the transfer processes of the actual degradation state and the abrupt change caused by shocks are depicted using a two-dimensional state-space model, and an expectation-maximization algorithm combined with the particle filtering is developed for parameter estimation. Furthermore, the explicit solution of RUL distribution is obtained when only considering harmful shocks, while a simulation method of RUL distribution is provided when both harmful and beneficial shocks exist. Finally, the effectiveness of the proposed method is verified by a numerical example and two practical case studies.     

The influence of the waveguide on the quality of measurements with ultrasonic Doppler velocimetry

The article is devoted to the study of the influence of geometric parameters of sound-conducting walls on the quality of measurement of liquid metal flow velocities by ultrasonic Doppler velocimetry. It was shown that the thickness and radius of a sound-conducting wall (waveguide) have a notable effect on the resulting velocity profiles. The flow in a round pipe, the length of which is much larger than its diameter, is considered as a reference flow. The positive effect of a stepwise waveguides with a diameter smaller than the diameter of the piezoelectric element of an ultrasonic transducer on the quality of velocity measurements was verified experimentally. It was found that the accuracy of the resulting velocity profiles largely depends on the length and the material of the waveguides, as well as the velocity of the incoming flow of liquid metal.     

基于GRA-GRNN模型的露天金属矿爆破后矿岩界线位移分析

为了避免露天金属矿爆破后导致爆堆边缘矿石品位贫化损失,需要根据最低品位阈值重新计算矿岩边界,而影响矿岩边界发生改变因素众多,需要确定主要影响因素。因此,利用爆堆爆破前地形方向和爆堆地质数据,构建灰色关联-广义回归神经网络模型(GRA-GRNN)分析爆堆矿岩边界变化主要影响因素。首先对爆堆钻孔品位数据使用析取克里金法进行空间插值,并根据矿山工艺最低品位阈值提取爆破前的矿岩边界;其次,将爆破前后的数字DEM模型进行求差,求得爆破后的爆堆数字DEM模型,并构建爆破前后爆堆数字DEM模型空间分布椭圆,从而确定爆堆爆破后的水平形变方向;对影响爆堆爆破后形变的可能因素进行提取,并应用GRA-GRNN模型选取主要影响因素及对其强度进行分析,并将其结果与BP神经网络模型预测结果进行了对比。从实验结果可知,影响爆堆爆破后形变强度排前三的因素为:爆破前地形方向、爆孔排距和列距,强度分别为0.880、0.760和0.755,预测结果优于BP模型。     

基于Matlab的太阳能电池数学模型及输出特性分析

该文主要讨论了太阳能电池的数学模型、温度及光照变化时4个典型参数Voc、Isc、Vm、Im的计算方法及仿真结果。以无锡尚德3909电池在25°C 1000W和4209电池在30°C、的测试数据为参考数据,分别给出了温度为25°C时800W、200W和光照在1 000W/m2时40和60°C两种情况下基于数学模型的Voc、Isc、Vm、Im的计算结果和基于Matlab的仿真图形,分析了输出特性曲线随温度和光照变化的变化规律,结果表明计算及仿真结果和实际测试数据基本相符。     

CineCubes: Aiding data workers gain insights from OLAP queries

In this paper we demonstrate that it is possible to enrich query answering with a short data movie that gives insights to the original results of an OLAP query. Our method, implemented in an actual system, CineCubes, includes the following steps. The user submits a query over an underlying star schema. Taking this query as input, the system comes up with a set of queries complementing the information content of the original query, and executes them. For each of the query results, we execute a set of highlight extraction algorithms that identify interesting patterns and values in the data of the results. Then, the system visualizes the query results and accompanies this presentation with a text commenting on the result highlights. Moreover, via a text-to-speech conversion the system automatically produces audio for the constructed text. Each combination of visualization, text and audio practically constitutes a movie, which is wrapped as a PowerPoint presentation and returned to the user.     

LNG energy transfer uncertainty–sensitivity to composition and temperature changes

Determining and reducing the measurement uncertainty of LNG energy transfer in custody transfer operations is considered extremely important and challenging for industry. The European Metrology Research Programme (EMRP) for Liquefied Natural Gas (LNG) has been focused on reducing the uncertainty in the evaluation of LNG energy transfers by improving existing measurement methods, validating new measurement methods and development of new traceable calibration systems. Part of this project was to produce realistic measurement uncertainty budgets and to determine the sensitivity of the overall LNG energy transfer uncertainty to changes in the composition and temperature of different LNG cargoes.This paper provides details on the development of an uncertainty budget and the results from the sensitivity study. It was found that the uncertainty in the LNG energy transfer ranged from 0.56% to 0.77% when using the uncertainty budget for 461 LNG cargoes. The variation was mainly due to the difference in the LNG composition and its associated uncertainty.     

An experimental study of adaptive control for evolutionary algorithms

In this paper, we investigate how adaptive operator selection techniques are able to efficiently manage the balance between exploration and exploitation in an evolutionary algorithm, when solving combinatorial optimization problems. We introduce new high level reactive search strategies based on a generic algorithm's controller that is able to schedule the basic variation operators of the evolutionary algorithm, according to the observed state of the search. Our experiments on SAT instances show that reactive search strategies improve the performance of the solving algorithm.