Implementing Qubits with Superconducting Integrated Circuits

Superconducting qubits are solid state electrical circuits fabricated using techniques borrowed from conventional integrated circuits. They are based on the Josephson tunnel junction, the only non-dissipative, strongly non-linear circuit element available at low temperature. In contrast to microscopic entities such as spins or atoms, they tend to be well coupled to other circuits, which make them appealling from the point of view of readout and gate implementation. Very recently, new designs of superconducting qubits based on multi-junction circuits have solved the problem of isolation from unwanted extrinsic electromagnetic perturbations. We discuss in this review how qubit decoherence is affected by the intrinsic noise of the junction and what can be done to improve it. PACS: 03.67.-a, 03.65.Yz, 85.25.-j, 85.35.Gv     

二维多孔数控钻床加工路径的生成及优化

印刷电路板 PCB的加工是二维多孔数控钻的典型。实践表明加工同一零件不同的走刀路径其长度相差极大。为提高生产率 ,应使刀具的走刀路径尽量短 ,这其实是大型的 TSP问题。本文提出了几种路径的生成方法 ,分析了各自的适用场合。并用实例验证所提出的路径生成方法可极大地提高实际钻孔的加工效率。     

有机极化聚合物材料及电光调制器件

有机极化聚合物材料是一类新型的功能高分子材料，在光电子及集成光学方面具有诱人的应用前景，其电光调制器件已接近实用化，本文综述了有机极化聚合物材料，极化聚合物体系及电光调制器件的研究进展，并指出它们存在的问题和发展方向。     

网络化制造中基于STEP-NC的编程方法

STEP-NC是由欧美提出的新的数控接口标准，目的是取代旧的数控标准ISO6983。本文首先分析了STEP-NC的两种应用标准：ISO14649（ARM）和STEPAP238（AIM），并且分析了Part21和Part28的应用领域及Part21文件格式和其中的信息产生方法。然後介绍了ST-Developer环境下ROSEC＋＋颠库编程接口及其应用程序的早、晚编联方式，并且以此为基础设计了整个程序的编程流程，重点介绍了工艺规划设计。最后给出了在C＋＋编程环境下利用ROSE库函数写入形成STEP AP238文件的方法。     

硅光电负阻器件的构成原理与分类

将三端负阻器件与硅光电探测器相结合 ,通过新的构思成功地提出并构成了一类新型光电器件——硅光电负阻器件。文中报道了该器件构成的一般性原理 ,以及依据此构成原理确定的分类方法     

长距离钢带传动的张紧机构设计与应用

比较了几种长距离传动方式的特点与适用场合，重点探讨了实现长距离精密传动的技术要点。结合实际工程，完成了长距离钢带精密传动的应用，并指出张紧机构的设计与应用是钢带实现长距离精密传动的关键。为此文中对钢带传动的典型张紧机构进行了比较，并分析了这几类张紧机构的应用情况，有参考和应用价值。     

Factors influencing feature usage in work-related communication

Two studies are presented. The first aimed to identify possible barriers to the uptake and use of commonly available telephony features and to determine whether greater knowledge of features/access codes and availability of user manuals could increase feature usage under certain conditions. Results showed that feature-usage patterns were not affected by any of the manipulations, but that they were determined by specific job demands. Using Constantine and Lockwood's (1999) conceptualization of user roles, a method to support feature bundling decisions for specific target markets was developed and tested in the second study. The method - Strategic User Needs Analysis (SUNA) - was shown to yield a useful balance between high- and low-level information about selected roles. SUNA provided sufficient information to distinguish between PDA feature usage patterns of two similar target user groups as well as to suggest additional features each of the two target groups would find useful. The development of SUNA and observational findings of actual PDA usage are reported.     

噪声测量作为筛选光电耦合器件的一种方法

本文针对目前用于光电耦合器件筛选方法的不足，提出了用测量耦合器件噪声功率谱的方法来筛选掉噪声值大的器件，给出一批光电耦合器件的测量统计结果及在不同工作点时的噪声功率谱，并给出相应的筛选标准，实验结果表明，这种方法是有效、可行的。     

相关双取样电路在降低CCD噪声中的应用

CCD器件已经广泛地应用于各个研究领域中 ,对其信号的具体处理方法是各种各样的。我们针对所研究的对象采取了一定的降低噪声的措施 ,取得了较好的结果 ,本文将对此进行阐述     

数控加工的基本坐标系和对刀问题

数控加工中的对刀问题影响机械加工的各个方面。这里从介绍数控机床的基本坐标系出发，重点阐述了对刀的基本原理和方法以及常见数控机床对刀问题的处理。